Gecko [ www.utparral.edu.mx ]

Name	Size	Permission
__pycache__	[ DIR ]	drwxrwxr-x
aboutdialog_base.py	8.27 KB	-rw-r--r--
aboutdialog.py	1.7 KB	-rw-r--r--
aligndialog_base.py	24.45 KB	-rw-r--r--
aligndialog.py	31.94 KB	-rw-r--r--
cleandialog_base.py	11.46 KB	-rw-r--r--
cleandialog.py	12.28 KB	-rw-r--r--
colorcaldialog_base.py	23.27 KB	-rw-r--r--
colorcaldialog.py	14.36 KB	-rw-r--r--
devicesetupdialog_base.py	4.58 KB	-rw-r--r--
devicesetupdialog.py	8.57 KB	-rw-r--r--
deviceuricombobox.py	5.4 KB	-rw-r--r--
devmgr5_base.py	23.31 KB	-rw-r--r--
devmgr5.py	83.96 KB	-rw-r--r--
devmgr_ext.py	2.51 KB	-rw-r--r--
fabgrouptable.py	2.26 KB	-rw-r--r--
fabnametable.py	1.2 KB	-rw-r--r--
fabwindow_base.py	8.7 KB	-rw-r--r--
fabwindow.py	23.7 KB	-rw-r--r--
faxsetupdialog_base.py	5.42 KB	-rw-r--r--
faxsetupdialog.py	8.97 KB	-rw-r--r--
filetable.py	15.45 KB	-rw-r--r--
firmwaredialog_base.py	3.59 KB	-rw-r--r--
firmwaredialog.py	3 KB	-rw-r--r--
infodialog_base.py	5.76 KB	-rw-r--r--
infodialog.py	10.22 KB	-rw-r--r--
__init__.py	786 B	-rw-r--r--
linefeedcaldialog_base.py	2.7 KB	-rw-r--r--
linefeedcaldialog.py	3.52 KB	-rw-r--r--
loadpapergroupbox.py	3.3 KB	-rw-r--r--
makecopiesdialog_base.py	2.42 KB	-rw-r--r--
makecopiesdialog.py	2.55 KB	-rw-r--r--
mimetypesdialog_base.py	4.17 KB	-rw-r--r--
mimetypesdialog.py	1.76 KB	-rw-r--r--
nodevicesdialog_base.py	6.05 KB	-rw-r--r--
nodevicesdialog.py	2.26 KB	-rw-r--r--
plugindiagnose_base.py	3.02 KB	-rw-r--r--
plugindiagnose.py	3.03 KB	-rw-r--r--
plugindialog_base.py	6.7 KB	-rw-r--r--
plugindialog.py	12.2 KB	-rw-r--r--
pluginlicensedialog_base.py	4.81 KB	-rw-r--r--
pluginlicensedialog.py	1.34 KB	-rw-r--r--
pqdiagdialog_base.py	2.67 KB	-rw-r--r--
pqdiagdialog.py	3.34 KB	-rw-r--r--
printdialog_base.py	5.44 KB	-rw-r--r--
printdialog.py	6 KB	-rw-r--r--
printernamecombobox.py	5.46 KB	-rw-r--r--
printsettings_base.py	210 B	-rw-r--r--
printsettingsdialog_base.py	2.71 KB	-rw-r--r--
printsettingsdialog.py	3.46 KB	-rw-r--r--
printsettingstoolbox.py	79.17 KB	-rw-r--r--
printtestpagedialog_base.py	4.22 KB	-rw-r--r--
printtestpagedialog.py	4.78 KB	-rw-r--r--
queuesconf.py	10.61 KB	-rw-r--r--
readonlyradiobutton.py	1.63 KB	-rw-r--r--
scandialog.py	85.66 KB	-rw-r--r--
sendfaxdialog_base.py	23.96 KB	-rw-r--r--
sendfaxdialog.py	37.13 KB	-rw-r--r--
settingsdialog_base.py	16.93 KB	-rw-r--r--
settingsdialog.py	4.15 KB	-rw-r--r--
setupdialog_base5.py	23.17 KB	-rw-r--r--
setupdialog_base.py	23.38 KB	-rw-r--r--
setupdialog.py	54 KB	-rw-r--r--
systemtray.py	32.63 KB	-rw-r--r--
systrayframe_base.py	5.96 KB	-rw-r--r--
systrayframe.py	8.2 KB	-rw-r--r--
ui_utils.py	20.76 KB	-rw-r--r--
upgradedialog_base.py	3.38 KB	-rw-r--r--
upgradedialog.py	4.59 KB	-rw-r--r--
wifisetupdialog_base.py	39.7 KB	-rw-r--r--
wifisetupdialog.py	31.42 KB	-rw-r--r--

Code Editor : cleandialog.py

# -*- coding: utf-8 -*-
#
# (c) Copyright 2001-2015 HP Development Company, L.P.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
#
# Authors: Don Welch
#

# StdLib
import operator
import signal

# Local
from base.g import *
from base import device, utils, maint
from prnt import cups
from base.codes import *
from .ui_utils import *

# Qt
from PyQt5.QtCore import *
from PyQt5.QtGui import *

# Ui
from .cleandialog_base import Ui_Dialog

CLEAN_TYPE_INITIAL = 1000
CLEAN_TYPE_TEST = 1001

PAGE_START = 0
PAGE_LEVEL_1 = 1
PAGE_LEVEL_2 = 2
PAGE_LEVEL_3 = 3
PAGE_FRONT_PANEL = 4

BUTTON_CLEAN = 0
BUTTON_NEXT = 1
BUTTON_FINISH = 2

LEDM_CLEAN_VERIFY_PAGE_JOB=b"<ipdyn:JobType>cleaningVerificationPage</ipdyn:JobType>"

#d = None
def true():
    return True

class CleanDialog(QDialog, Ui_Dialog):
    def __init__(self, parent, device_uri):
        QDialog.__init__(self, parent)
        self.setupUi(self)
        self.device_uri = device_uri
        self.clean_type = CLEAN_TYPE_INITIAL
        self.abort = False
        self.seq_index = 0
        self.step = 1
        self.step_max = 0

self.max_steps = {
                      CLEAN_TYPE_UNSUPPORTED : 1,
                      CLEAN_TYPE_PCL : 4,
                      CLEAN_TYPE_LIDIL : 4,
                      CLEAN_TYPE_PCL_WITH_PRINTOUT : 4,
                      CLEAN_TYPE_LEDM : 4,
                    }

self.seq = { # (func|method, tuple of params|None)
                    CLEAN_TYPE_INITIAL: [ # (used when starting up and clean-type isn't known)
                               (self.showStartPage, None),
                               (self.endStartPage, None), # switch to a valid clean-type here
                            ],

CLEAN_TYPE_UNSUPPORTED : [
                                (self.showFrontPanelPage, None),
                                (self.endFrontPanelPage, None),
                                (self.close, None),
                            ],

CLEAN_TYPE_PCL : [ # 1
                            (self.showLevel1Page, None),
                            (self.endLevel1Page, None),
                            (self.doClean, (1,)),
                            (self.showLevel2Page, None),
                            (self.endLevel2Page, None),
                            (self.doClean, (2,)),
                            (self.showLevel3Page, None),
                            (self.endLevel3Page, None),
                            (self.doClean, (3,)),
                            (self.close, None),
                            ],

CLEAN_TYPE_LIDIL : [  # 2
                            (self.showLevel1Page, None),
                            (self.endLevel1Page, None),
                            (self.doClean, (1,)),
                            (self.showLevel2Page, None),
                            (self.endLevel2Page, None),
                            (self.doClean, (2,)),
                            (self.showLevel3Page, None),
                            (self.endLevel3Page, None),
                            (self.doClean, (3,)),
                            (self.close, None),
                            ],

CLEAN_TYPE_PCL_WITH_PRINTOUT : [ # 3
                            (self.showLevel1Page, None),
                            (self.endLevel1Page, None),
                            (self.doClean, (1,)),
                            (self.showLevel2Page, None),
                            (self.endLevel2Page, None),
                            (self.doClean, (2,)),
                            (self.showLevel3Page, None),
                            (self.endLevel3Page, None),
                            (self.doClean, (3,)),
                            # TODO: Add print-out
                            (self.close, None),
                            ],

CLEAN_TYPE_LEDM : [ # 4
                            (self.showLevel1Page, None),
                            (self.endLevel1Page, None),
                            (self.doClean, (1,)),
                            (self.showLevel2Page, None),
                            (self.endLevel2Page, None),
                            (self.doClean, (2,)),
                            (self.showLevel3Page, None),
                            (self.endLevel3Page, None),
                            (self.doClean, (3,)),
                            # TODO: Add print-out
                            (self.close, None),
                            ],
                    }

self.initUi()
        QTimer.singleShot(0, self.nextSequence)

def initUi(self):
        # connect signals/slots
        self.CancelButton.clicked.connect(self.CancelButton_clicked)
        self.NextButton.clicked.connect(self.NextButton_clicked)
        self.DeviceComboBox.DeviceUriComboBox_noDevices.connect(self.DeviceUriComboBox_noDevices)
        self.DeviceComboBox.DeviceUriComboBox_currentChanged.connect(self.DeviceUriComboBox_currentChanged)
        self.DeviceComboBox.setFilter({'clean-type': (operator.ne, CLEAN_TYPE_NONE)})

signal.signal(signal.SIGINT, signal.SIG_DFL)

if self.device_uri:
            self.DeviceComboBox.setInitialDevice(self.device_uri)

# Application icon
        self.setWindowIcon(QIcon(load_pixmap('hp_logo', '128x128')))

def NextButton_clicked(self):
        self.nextSequence()

def nextSequence(self):
        while True:
            try:
                seq, params = self.seq[self.clean_type][self.seq_index]
            except IndexError:
                break

if seq is None:
                self.seq_index += 1
                continue

self.new_page = False

t = []
            if params is not None:
                for p in params:
                    try:
                        t.append(p())
                    except:
                        t.append(p)

try:
                log.debug("%s(%s)" % (seq.__name__, ','.join([repr(x) for x in t])))
            except AttributeError:
                pass

try:
                seq(*t)
            except Error:
                CheckDeviceUI(self)
                break

self.seq_index += 1

if self.new_page:
                break

if self.abort:
                self.close()

def showStartPage(self):
        self.setCleanButton(BUTTON_NEXT)
        num_devices = self.DeviceComboBox.setDevices()

if num_devices == 1:
            self.skipPage()
            return

self.DeviceComboBox.updateUi()
        self.displayPage(PAGE_START)

def endStartPage(self):
        self.mq = device.queryModelByURI(self.device_uri)
        self.clean_type = self.mq.get('clean-type', CLEAN_TYPE_NONE)
        self.seq_index = -1

log.debug("clean-type=%d" % self.clean_type)
        self.step_max = self.max_steps[self.clean_type]

try:
            self.dev = device.Device(self.device_uri)
        except Error:
            CheckDeviceUI(self)
            return

def showLevel1Page(self):
        self.setCleanButton(BUTTON_CLEAN)
        self.displayPage(PAGE_LEVEL_1)

def endLevel1Page(self):
        pass

def showLevel2Page(self):
        self.displayPage(PAGE_LEVEL_2)

def endLevel2Page(self):
        pass

def showLevel3Page(self):
        self.displayPage(PAGE_LEVEL_3)

def endLevel3Page(self):
        pass

def showFrontPanelPage(self):
        self.setCleanButton(BUTTON_FINISH)
        self.displayPage(PAGE_FRONT_PANEL)

def endFrontPanelPage(self):
        pass

def DeviceUriComboBox_currentChanged(self, device_uri):
        self.device_uri = device_uri

def DeviceUriComboBox_noDevices(self):
 FailureUI(self, self.__tr("No devices that support printhead cleaning found.Click OK to exit."))
 self.close()

def CancelButton_clicked(self):
        self.close()

def doClean(self, level):
        try:
            try:
                self.dev.open()
            except Error:
                CheckDeviceUI(self)
            else:
                if self.dev.isIdleAndNoError():
                    if self.clean_type in (CLEAN_TYPE_PCL, # 1
                                      CLEAN_TYPE_PCL_WITH_PRINTOUT): # 3

if level == 1:
                            maint.cleanType1(self.dev)
                            maint.print_clean_test_page(self.dev)

elif level == 2:
                            maint.primeType1(self.dev)
                            maint.print_clean_test_page(self.dev)

else: # 3
                            maint.wipeAndSpitType1(self.dev)
                            maint.print_clean_test_page(self.dev)

elif self.clean_type == CLEAN_TYPE_LIDIL: # 2
                        if level == 1:
                            maint.cleanType2(self.dev)
                            maint.print_clean_test_page(self.dev)

elif level == 2:
                            maint.primeType2(self.dev)
                            maint.print_clean_test_page(self.dev)

else: # 3
                            maint.wipeAndSpitType2(self.dev)
                            maint.print_clean_test_page(self.dev)

elif self.clean_type == CLEAN_TYPE_LEDM: # 4
                        IPCap_data = maint.getCleanLedmCapacity(self.dev)
                        print_verification_page = True
                        if LEDM_CLEAN_VERIFY_PAGE_JOB not in IPCap_data:
                            print_verification_page = False

if level == 1:
                            maint.cleanTypeLedm(self.dev)
                            maint.cleanTypeVerify(self.dev,level, print_verification_page)
                            if print_verification_page is False:
                                self.setCustomMessage(self.Prompt_5,"Cleaning level 1 is Completed. \nPress \"Cancel\" to Finish. Press \"Clean\" for next level clean")

elif level == 2:
                            maint.cleanTypeLedm1(self.dev)
                            maint.cleanTypeVerify(self.dev,level, print_verification_page)
                            if print_verification_page is False:
                                self.setCustomMessage(self.Prompt_6,"Cleaning level 2 is Completed. \nPress \"Cancel\" to Finish. Press \"Clean\" for next level clean")

else: # 3
                            maint.cleanTypeLedm2(self.dev)
                            maint.cleanTypeVerify(self.dev,level, print_verification_page)

else:
                    CheckDeviceUI(self)

finally:
            if self.dev is not None:
                self.dev.close()

#
    # Misc
    #

def displayPage(self, page):
        self.updateStepText(self.step)
        self.step += 1
        self.new_page = True
        self.StackedWidget.setCurrentIndex(page)

def skipPage(self):
        self.step += 1
        self.new_page = False

def updateStepText(self, p=None):
        if p is None or not self.step_max:
            self.StepText.setText(str(""))
        else:
            self.StepText.setText(self.__tr("Step %s of %s" % (p, self.step_max)))

def setCleanButton(self, typ=BUTTON_CLEAN):
        if typ == BUTTON_CLEAN:
            self.NextButton.setText(self.__tr("Clean"))
        elif typ == BUTTON_NEXT:
            self.NextButton.setText(self.__tr("Next >"))
        elif typ == BUTTON_FINISH:
            self.NextButton.setText(self.__tr("Finish"))

def setCustomMessage(self, button, message):
        button.setText(self.__tr(message))

def __tr(self,s,c = None):
        return qApp.translate("CleanDialog",s,c)

${this.title}

Code Editor : cleandialog.py