Gecko [ www.utparral.edu.mx ]

Name	Size	Permission
__pycache__	[ DIR ]	drwxr-xr-x
__init__.py	995 B	-rw-r--r--
olefile.py	102.84 KB	-rw-r--r--

Code Editor : olefile.py

"""
olefile (formerly OleFileIO_PL)

Module to read/write Microsoft OLE2 files (also called Structured Storage or
Microsoft Compound Document File Format), such as Microsoft Office 97-2003
documents, Image Composer and FlashPix files, Outlook messages, ...
This version is compatible with Python 2.7 and 3.4+

Project website: https://www.decalage.info/olefile

olefile is copyright (c) 2005-2018 Philippe Lagadec
(https://www.decalage.info)

olefile is based on the OleFileIO module from the PIL library v1.1.7
See: http://www.pythonware.com/products/pil/index.htm
and http://svn.effbot.org/public/tags/pil-1.1.7/PIL/OleFileIO.py

The Python Imaging Library (PIL) is
Copyright (c) 1997-2009 by Secret Labs AB
Copyright (c) 1995-2009 by Fredrik Lundh

See source code and LICENSE.txt for information on usage and redistribution.
"""

# Since OleFileIO_PL v0.45, only Python 2.7 and 3.4+ are supported
# This import enables print() as a function rather than a keyword
# (main requirement to be compatible with Python 3.x)
# The comment on the line below should be printed on Python 2.5 or older:
from __future__ import print_function   # This version of olefile requires Python 2.7 or 3.4+.

#--- LICENSE ------------------------------------------------------------------

# olefile (formerly OleFileIO_PL) is copyright (c) 2005-2018 Philippe Lagadec
# (https://www.decalage.info)
#
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without modification,
# are permitted provided that the following conditions are met:
#
#  * Redistributions of source code must retain the above copyright notice, this
#    list of conditions and the following disclaimer.
#  * Redistributions in binary form must reproduce the above copyright notice,
#    this list of conditions and the following disclaimer in the documentation
#    and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
# CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
# OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

# ----------
# PIL License:
#
# olefile is based on source code from the OleFileIO module of the Python
# Imaging Library (PIL) published by Fredrik Lundh under the following license:

# The Python Imaging Library (PIL) is
#    Copyright (c) 1997-2009 by Secret Labs AB
#    Copyright (c) 1995-2009 by Fredrik Lundh
#
# By obtaining, using, and/or copying this software and/or its associated
# documentation, you agree that you have read, understood, and will comply with
# the following terms and conditions:
#
# Permission to use, copy, modify, and distribute this software and its
# associated documentation for any purpose and without fee is hereby granted,
# provided that the above copyright notice appears in all copies, and that both
# that copyright notice and this permission notice appear in supporting
# documentation, and that the name of Secret Labs AB or the author(s) not be used
# in advertising or publicity pertaining to distribution of the software
# without specific, written prior permission.
#
# SECRET LABS AB AND THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS
# SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS.
# IN NO EVENT SHALL SECRET LABS AB OR THE AUTHORS BE LIABLE FOR ANY SPECIAL,
# INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
# LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
# OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
# PERFORMANCE OF THIS SOFTWARE.

__date__    = "2018-09-09"
__version__ = '0.46'
__author__  = "Philippe Lagadec"

__all__ = ['isOleFile', 'OleFileIO', 'OleMetadata', 'enable_logging',
           'MAGIC', 'STGTY_EMPTY', 'KEEP_UNICODE_NAMES',
           'STGTY_STREAM', 'STGTY_STORAGE', 'STGTY_ROOT', 'STGTY_PROPERTY',
           'STGTY_LOCKBYTES', 'MINIMAL_OLEFILE_SIZE',
           'DEFECT_UNSURE', 'DEFECT_POTENTIAL', 'DEFECT_INCORRECT',
           'DEFECT_FATAL', 'DEFAULT_PATH_ENCODING',
           'MAXREGSECT', 'DIFSECT', 'FATSECT', 'ENDOFCHAIN', 'FREESECT',
           'MAXREGSID', 'NOSTREAM', 'UNKNOWN_SIZE', 'WORD_CLSID'
]

import io
import sys
import struct, array, os.path, datetime, logging

#=== COMPATIBILITY WORKAROUNDS ================================================

# For Python 3.x, need to redefine long as int:
if str is not bytes:
    long = int

# Need to make sure we use xrange both on Python 2 and 3.x:
try:
    # on Python 2 we need xrange:
    iterrange = xrange
except:
    # no xrange, for Python 3 it was renamed as range:
    iterrange = range

#[PL] workaround to fix an issue with array item size on 64 bits systems:
if array.array('L').itemsize == 4:
    # on 32 bits platforms, long integers in an array are 32 bits:
    UINT32 = 'L'
elif array.array('I').itemsize == 4:
    # on 64 bits platforms, integers in an array are 32 bits:
    UINT32 = 'I'
elif array.array('i').itemsize == 4:
    # On 64 bit Jython, signed integers ('i') are the only way to store our 32
    # bit values in an array in a *somewhat* reasonable way, as the otherwise
    # perfectly suited 'H' (unsigned int, 32 bits) results in a completely
    # unusable behaviour. This is most likely caused by the fact that Java
    # doesn't have unsigned values, and thus Jython's "array" implementation,
    # which is based on "jarray", doesn't have them either.
    # NOTE: to trick Jython into converting the values it would normally
    # interpret as "signed" into "unsigned", a binary-and operation with
    # 0xFFFFFFFF can be used. This way it is possible to use the same comparing
    # operations on all platforms / implementations. The corresponding code
    # lines are flagged with a 'JYTHON-WORKAROUND' tag below.
    UINT32 = 'i'
else:
    raise ValueError('Need to fix a bug with 32 bit arrays, please contact author...')

#[PL] These workarounds were inspired from the Path module
# (see http://www.jorendorff.com/articles/python/path/)
try:
    basestring
except NameError:
    basestring = str

#[PL] Experimental setting: if True, OLE filenames will be kept in Unicode
# if False (default PIL behaviour), all filenames are converted to Latin-1.
KEEP_UNICODE_NAMES = True

if sys.version_info[0] < 3:
    # On Python 2.x, the default encoding for path names is UTF-8:
    DEFAULT_PATH_ENCODING = 'utf-8'
else:
    # On Python 3.x, the default encoding for path names is Unicode (None):
    DEFAULT_PATH_ENCODING = None

# === LOGGING =================================================================

def get_logger(name, level=logging.CRITICAL+1):
    """
    Create a suitable logger object for this module.
    The goal is not to change settings of the root logger, to avoid getting
    other modules' logs on the screen.
    If a logger exists with same name, reuse it. (Else it would have duplicate
    handlers and messages would be doubled.)
    The level is set to CRITICAL+1 by default, to avoid any logging.
    """
    # First, test if there is already a logger with the same name, else it
    # will generate duplicate messages (due to duplicate handlers):
    if name in logging.Logger.manager.loggerDict:
        #NOTE: another less intrusive but more "hackish" solution would be to
        # use getLogger then test if its effective level is not default.
        logger = logging.getLogger(name)
        # make sure level is OK:
        logger.setLevel(level)
        return logger
    # get a new logger:
    logger = logging.getLogger(name)
    # only add a NullHandler for this logger, it is up to the application
    # to configure its own logging:
    logger.addHandler(logging.NullHandler())
    logger.setLevel(level)
    return logger

# a global logger object used for debugging:
log = get_logger('olefile')

def enable_logging():
    """
    Enable logging for this module (disabled by default).
    This will set the module-specific logger level to NOTSET, which
    means the main application controls the actual logging level.
    """
    log.setLevel(logging.NOTSET)

#=== CONSTANTS ===============================================================

#: magic bytes that should be at the beginning of every OLE file:
MAGIC = b'\xD0\xCF\x11\xE0\xA1\xB1\x1A\xE1'

#[PL]: added constants for Sector IDs (from AAF specifications)
MAXREGSECT = 0xFFFFFFFA #: (-6) maximum SECT
DIFSECT    = 0xFFFFFFFC #: (-4) denotes a DIFAT sector in a FAT
FATSECT    = 0xFFFFFFFD #: (-3) denotes a FAT sector in a FAT
ENDOFCHAIN = 0xFFFFFFFE #: (-2) end of a virtual stream chain
FREESECT   = 0xFFFFFFFF #: (-1) unallocated sector

#[PL]: added constants for Directory Entry IDs (from AAF specifications)
MAXREGSID  = 0xFFFFFFFA #: (-6) maximum directory entry ID
NOSTREAM   = 0xFFFFFFFF #: (-1) unallocated directory entry

#[PL] object types in storage (from AAF specifications)
STGTY_EMPTY     = 0 #: empty directory entry
STGTY_STORAGE   = 1 #: element is a storage object
STGTY_STREAM    = 2 #: element is a stream object
STGTY_LOCKBYTES = 3 #: element is an ILockBytes object
STGTY_PROPERTY  = 4 #: element is an IPropertyStorage object
STGTY_ROOT      = 5 #: element is a root storage

# Unknown size for a stream (used by OleStream):
UNKNOWN_SIZE = 0x7FFFFFFF

#
# --------------------------------------------------------------------
# property types

VT_EMPTY=0; VT_NULL=1; VT_I2=2; VT_I4=3; VT_R4=4; VT_R8=5; VT_CY=6;
VT_DATE=7; VT_BSTR=8; VT_DISPATCH=9; VT_ERROR=10; VT_BOOL=11;
VT_VARIANT=12; VT_UNKNOWN=13; VT_DECIMAL=14; VT_I1=16; VT_UI1=17;
VT_UI2=18; VT_UI4=19; VT_I8=20; VT_UI8=21; VT_INT=22; VT_UINT=23;
VT_VOID=24; VT_HRESULT=25; VT_PTR=26; VT_SAFEARRAY=27; VT_CARRAY=28;
VT_USERDEFINED=29; VT_LPSTR=30; VT_LPWSTR=31; VT_FILETIME=64;
VT_BLOB=65; VT_STREAM=66; VT_STORAGE=67; VT_STREAMED_OBJECT=68;
VT_STORED_OBJECT=69; VT_BLOB_OBJECT=70; VT_CF=71; VT_CLSID=72;
VT_VECTOR=0x1000;

# map property id to name (for debugging purposes)
# VT = {}
# for keyword, var in list(vars().items()):
#     if keyword[:3] == "VT_":
#         VT[var] = keyword

#
# --------------------------------------------------------------------
# Some common document types (root.clsid fields)

WORD_CLSID = "00020900-0000-0000-C000-000000000046"
#TODO: check Excel, PPT, ...

#[PL]: Defect levels to classify parsing errors - see OleFileIO._raise_defect()
DEFECT_UNSURE =    10    # a case which looks weird, but not sure it's a defect
DEFECT_POTENTIAL = 20    # a potential defect
DEFECT_INCORRECT = 30    # an error according to specifications, but parsing
                         # can go on
DEFECT_FATAL =     40    # an error which cannot be ignored, parsing is
                         # impossible

# Minimal size of an empty OLE file, with 512-bytes sectors = 1536 bytes
# (this is used in isOleFile and OleFile.open)
MINIMAL_OLEFILE_SIZE = 1536

#=== FUNCTIONS ===============================================================

def isOleFile (filename):
    """
    Test if a file is an OLE container (according to the magic bytes in its header).

.. note::
        This function only checks the first 8 bytes of the file, not the
        rest of the OLE structure.

.. versionadded:: 0.16

:param filename: filename, contents or file-like object of the OLE file (string-like or file-like object)

- if filename is a string smaller than 1536 bytes, it is the path
          of the file to open. (bytes or unicode string)
        - if filename is a string longer than 1535 bytes, it is parsed
          as the content of an OLE file in memory. (bytes type only)
        - if filename is a file-like object (with read and seek methods),
          it is parsed as-is.

:type filename: bytes or str or unicode or file
    :returns: True if OLE, False otherwise.
    :rtype: bool
    """
    # check if filename is a string-like or file-like object:
    if hasattr(filename, 'read'):
        # file-like object: use it directly
        header = filename.read(len(MAGIC))
        # just in case, seek back to start of file:
        filename.seek(0)
    elif isinstance(filename, bytes) and len(filename) >= MINIMAL_OLEFILE_SIZE:
        # filename is a bytes string containing the OLE file to be parsed:
        header = filename[:len(MAGIC)]
    else:
        # string-like object: filename of file on disk
        with open(filename, 'rb') as fp:
            header = fp.read(len(MAGIC))
    if header == MAGIC:
        return True
    else:
        return False

if bytes is str:
    # version for Python 2.x
    def i8(c):
        return ord(c)
else:
    # version for Python 3.x
    def i8(c):
        return c if c.__class__ is int else c[0]

def i16(c, o = 0):
    """
    Converts a 2-bytes (16 bits) string to an integer.

:param c: string containing bytes to convert
    :param o: offset of bytes to convert in string
    """
    return struct.unpack("<H", c[o:o+2])[0]

def i32(c, o = 0):
    """
    Converts a 4-bytes (32 bits) string to an integer.

:param c: string containing bytes to convert
    :param o: offset of bytes to convert in string
    """
    return struct.unpack("<I", c[o:o+4])[0]

def _clsid(clsid):
    """
    Converts a CLSID to a human-readable string.

:param clsid: string of length 16.
    """
    assert len(clsid) == 16
    # if clsid is only made of null bytes, return an empty string:
    # (PL: why not simply return the string with zeroes?)
    if not clsid.strip(b"\0"):
        return ""
    return (("%08X-%04X-%04X-%02X%02X-" + "%02X" * 6) %
            ((i32(clsid, 0), i16(clsid, 4), i16(clsid, 6)) +
            tuple(map(i8, clsid[8:16]))))

def filetime2datetime(filetime):
        """
        convert FILETIME (64 bits int) to Python datetime.datetime
        """
        # TODO: manage exception when microseconds is too large
        # inspired from https://code.activestate.com/recipes/511425-filetime-to-datetime/
        _FILETIME_null_date = datetime.datetime(1601, 1, 1, 0, 0, 0)
        #log.debug('timedelta days=%d' % (filetime//(10*1000000*3600*24)))
        return _FILETIME_null_date + datetime.timedelta(microseconds=filetime//10)

#=== CLASSES ==================================================================

class OleMetadata:
    """
    class to parse and store metadata from standard properties of OLE files.

Available attributes:
    codepage, title, subject, author, keywords, comments, template,
    last_saved_by, revision_number, total_edit_time, last_printed, create_time,
    last_saved_time, num_pages, num_words, num_chars, thumbnail,
    creating_application, security, codepage_doc, category, presentation_target,
    bytes, lines, paragraphs, slides, notes, hidden_slides, mm_clips,
    scale_crop, heading_pairs, titles_of_parts, manager, company, links_dirty,
    chars_with_spaces, unused, shared_doc, link_base, hlinks, hlinks_changed,
    version, dig_sig, content_type, content_status, language, doc_version

Note: an attribute is set to None when not present in the properties of the
    OLE file.

References for SummaryInformation stream:

- https://msdn.microsoft.com/en-us/library/dd942545.aspx
    - https://msdn.microsoft.com/en-us/library/dd925819%28v=office.12%29.aspx
    - https://msdn.microsoft.com/en-us/library/windows/desktop/aa380376%28v=vs.85%29.aspx
    - https://msdn.microsoft.com/en-us/library/aa372045.aspx
    - http://sedna-soft.de/articles/summary-information-stream/
    - https://poi.apache.org/apidocs/org/apache/poi/hpsf/SummaryInformation.html

References for DocumentSummaryInformation stream:

- https://msdn.microsoft.com/en-us/library/dd945671%28v=office.12%29.aspx
    - https://msdn.microsoft.com/en-us/library/windows/desktop/aa380374%28v=vs.85%29.aspx
    - https://poi.apache.org/apidocs/org/apache/poi/hpsf/DocumentSummaryInformation.html

new in version 0.25
    """

# attribute names for SummaryInformation stream properties:
    # (ordered by property id, starting at 1)
    SUMMARY_ATTRIBS = ['codepage', 'title', 'subject', 'author', 'keywords', 'comments',
        'template', 'last_saved_by', 'revision_number', 'total_edit_time',
        'last_printed', 'create_time', 'last_saved_time', 'num_pages',
        'num_words', 'num_chars', 'thumbnail', 'creating_application',
        'security']

# attribute names for DocumentSummaryInformation stream properties:
    # (ordered by property id, starting at 1)
    DOCSUM_ATTRIBS = ['codepage_doc', 'category', 'presentation_target', 'bytes', 'lines', 'paragraphs',
        'slides', 'notes', 'hidden_slides', 'mm_clips',
        'scale_crop', 'heading_pairs', 'titles_of_parts', 'manager',
        'company', 'links_dirty', 'chars_with_spaces', 'unused', 'shared_doc',
        'link_base', 'hlinks', 'hlinks_changed', 'version', 'dig_sig',
        'content_type', 'content_status', 'language', 'doc_version']

def __init__(self):
        """
        Constructor for OleMetadata
        All attributes are set to None by default
        """
        # properties from SummaryInformation stream
        self.codepage = None
        self.title = None
        self.subject = None
        self.author = None
        self.keywords = None
        self.comments = None
        self.template = None
        self.last_saved_by = None
        self.revision_number = None
        self.total_edit_time = None
        self.last_printed = None
        self.create_time = None
        self.last_saved_time = None
        self.num_pages = None
        self.num_words = None
        self.num_chars = None
        self.thumbnail = None
        self.creating_application = None
        self.security = None
        # properties from DocumentSummaryInformation stream
        self.codepage_doc = None
        self.category = None
        self.presentation_target = None
        self.bytes = None
        self.lines = None
        self.paragraphs = None
        self.slides = None
        self.notes = None
        self.hidden_slides = None
        self.mm_clips = None
        self.scale_crop = None
        self.heading_pairs = None
        self.titles_of_parts = None
        self.manager = None
        self.company = None
        self.links_dirty = None
        self.chars_with_spaces = None
        self.unused = None
        self.shared_doc = None
        self.link_base = None
        self.hlinks = None
        self.hlinks_changed = None
        self.version = None
        self.dig_sig = None
        self.content_type = None
        self.content_status = None
        self.language = None
        self.doc_version = None

def parse_properties(self, olefile):
        """
        Parse standard properties of an OLE file, from the streams
        ``\\x05SummaryInformation`` and ``\\x05DocumentSummaryInformation``,
        if present.
        Properties are converted to strings, integers or python datetime objects.
        If a property is not present, its value is set to None.
        """
        # first set all attributes to None:
        for attrib in (self.SUMMARY_ATTRIBS + self.DOCSUM_ATTRIBS):
            setattr(self, attrib, None)
        if olefile.exists("\x05SummaryInformation"):
            # get properties from the stream:
            # (converting timestamps to python datetime, except total_edit_time,
            # which is property #10)
            props = olefile.getproperties("\x05SummaryInformation",
                convert_time=True, no_conversion=[10])
            # store them into this object's attributes:
            for i in range(len(self.SUMMARY_ATTRIBS)):
                # ids for standards properties start at 0x01, until 0x13
                value = props.get(i+1, None)
                setattr(self, self.SUMMARY_ATTRIBS[i], value)
        if olefile.exists("\x05DocumentSummaryInformation"):
            # get properties from the stream:
            props = olefile.getproperties("\x05DocumentSummaryInformation",
                convert_time=True)
            # store them into this object's attributes:
            for i in range(len(self.DOCSUM_ATTRIBS)):
                # ids for standards properties start at 0x01, until 0x13
                value = props.get(i+1, None)
                setattr(self, self.DOCSUM_ATTRIBS[i], value)

def dump(self):
        """
        Dump all metadata, for debugging purposes.
        """
        print('Properties from SummaryInformation stream:')
        for prop in self.SUMMARY_ATTRIBS:
            value = getattr(self, prop)
            print('- %s: %s' % (prop, repr(value)))
        print('Properties from DocumentSummaryInformation stream:')
        for prop in self.DOCSUM_ATTRIBS:
            value = getattr(self, prop)
            print('- %s: %s' % (prop, repr(value)))

#--- OleStream ---------------------------------------------------------------

class OleStream(io.BytesIO):
    """
    OLE2 Stream

Returns a read-only file object which can be used to read
    the contents of a OLE stream (instance of the BytesIO class).
    To open a stream, use the openstream method in the OleFile class.

This function can be used with either ordinary streams,
    or ministreams, depending on the offset, sectorsize, and
    fat table arguments.

Attributes:

- size: actual size of data stream, after it was opened.
    """
    # FIXME: should store the list of sects obtained by following
    # the fat chain, and load new sectors on demand instead of
    # loading it all in one go.

def __init__(self, fp, sect, size, offset, sectorsize, fat, filesize, olefileio):
        """
        Constructor for OleStream class.

:param fp: file object, the OLE container or the MiniFAT stream
        :param sect: sector index of first sector in the stream
        :param size: total size of the stream
        :param offset: offset in bytes for the first FAT or MiniFAT sector
        :param sectorsize: size of one sector
        :param fat: array/list of sector indexes (FAT or MiniFAT)
        :param filesize: size of OLE file (for debugging)
        :param olefileio: OleFileIO object containing this stream
        :returns: a BytesIO instance containing the OLE stream
        """
        log.debug('OleStream.__init__:')
        log.debug('  sect=%d (%X), size=%d, offset=%d, sectorsize=%d, len(fat)=%d, fp=%s'
            %(sect,sect,size,offset,sectorsize,len(fat), repr(fp)))
        self.ole = olefileio
        # this check is necessary, otherwise when attempting to open a stream
        # from a closed OleFile, a stream of size zero is returned without
        # raising an exception. (see issue #81)
        if self.ole.fp.closed:
            raise OSError('Attempting to open a stream from a closed OLE File')
        #[PL] To detect malformed documents with FAT loops, we compute the
        # expected number of sectors in the stream:
        unknown_size = False
        if size == UNKNOWN_SIZE:
            # this is the case when called from OleFileIO._open(), and stream
            # size is not known in advance (for example when reading the
            # Directory stream). Then we can only guess maximum size:
            size = len(fat)*sectorsize
            # and we keep a record that size was unknown:
            unknown_size = True
            log.debug('  stream with UNKNOWN SIZE')
        nb_sectors = (size + (sectorsize-1)) // sectorsize
        log.debug('nb_sectors = %d' % nb_sectors)
        # This number should (at least) be less than the total number of
        # sectors in the given FAT:
        if nb_sectors > len(fat):
            self.ole._raise_defect(DEFECT_INCORRECT, 'malformed OLE document, stream too large')
        # optimization(?): data is first a list of strings, and join() is called
        # at the end to concatenate all in one string.
        # (this may not be really useful with recent Python versions)
        data = []
        # if size is zero, then first sector index should be ENDOFCHAIN:
        if size == 0 and sect != ENDOFCHAIN:
            log.debug('size == 0 and sect != ENDOFCHAIN:')
            self.ole._raise_defect(DEFECT_INCORRECT, 'incorrect OLE sector index for empty stream')
        #[PL] A fixed-length for loop is used instead of an undefined while
        # loop to avoid DoS attacks:
        for i in range(nb_sectors):
            log.debug('Reading stream sector[%d] = %Xh' % (i, sect))
            # Sector index may be ENDOFCHAIN, but only if size was unknown
            if sect == ENDOFCHAIN:
                if unknown_size:
                    log.debug('Reached ENDOFCHAIN sector for stream with unknown size')
                    break
                else:
                    # else this means that the stream is smaller than declared:
                    log.debug('sect=ENDOFCHAIN before expected size')
                    self.ole._raise_defect(DEFECT_INCORRECT, 'incomplete OLE stream')
            # sector index should be within FAT:
            if sect<0 or sect>=len(fat):
                log.debug('sect=%d (%X) / len(fat)=%d' % (sect, sect, len(fat)))
                log.debug('i=%d / nb_sectors=%d' %(i, nb_sectors))
##                tmp_data = b"".join(data)
##                f = open('test_debug.bin', 'wb')
##                f.write(tmp_data)
##                f.close()
##                log.debug('data read so far: %d bytes' % len(tmp_data))
                self.ole._raise_defect(DEFECT_INCORRECT, 'incorrect OLE FAT, sector index out of range')
                # stop reading here if the exception is ignored:
                break
            #TODO: merge this code with OleFileIO.getsect() ?
            #TODO: check if this works with 4K sectors:
            try:
                fp.seek(offset + sectorsize * sect)
            except:
                log.debug('sect=%d, seek=%d, filesize=%d' %
                    (sect, offset+sectorsize*sect, filesize))
                self.ole._raise_defect(DEFECT_INCORRECT, 'OLE sector index out of range')
                # stop reading here if the exception is ignored:
                break
            sector_data = fp.read(sectorsize)
            # [PL] check if there was enough data:
            # Note: if sector is the last of the file, sometimes it is not a
            # complete sector (of 512 or 4K), so we may read less than
            # sectorsize.
            if len(sector_data)!=sectorsize and sect!=(len(fat)-1):
                log.debug('sect=%d / len(fat)=%d, seek=%d / filesize=%d, len read=%d' %
                    (sect, len(fat), offset+sectorsize*sect, filesize, len(sector_data)))
                log.debug('seek+len(read)=%d' % (offset+sectorsize*sect+len(sector_data)))
                self.ole._raise_defect(DEFECT_INCORRECT, 'incomplete OLE sector')
            data.append(sector_data)
            # jump to next sector in the FAT:
            try:
                sect = fat[sect] & 0xFFFFFFFF  # JYTHON-WORKAROUND
            except IndexError:
                # [PL] if pointer is out of the FAT an exception is raised
                self.ole._raise_defect(DEFECT_INCORRECT, 'incorrect OLE FAT, sector index out of range')
                # stop reading here if the exception is ignored:
                break
        #[PL] Last sector should be a "end of chain" marker:
        # if sect != ENDOFCHAIN:
        #     raise IOError('incorrect last sector index in OLE stream')
        data = b"".join(data)
        # Data is truncated to the actual stream size:
        if len(data) >= size:
            log.debug('Read data of length %d, truncated to stream size %d' % (len(data), size))
            data = data[:size]
            # actual stream size is stored for future use:
            self.size = size
        elif unknown_size:
            # actual stream size was not known, now we know the size of read
            # data:
            log.debug('Read data of length %d, the stream size was unknown' % len(data))
            self.size = len(data)
        else:
            # read data is less than expected:
            log.debug('Read data of length %d, less than expected stream size %d' % (len(data), size))
            # TODO: provide details in exception message
            self.size = len(data)
            self.ole._raise_defect(DEFECT_INCORRECT, 'OLE stream size is less than declared')
        # when all data is read in memory, BytesIO constructor is called
        io.BytesIO.__init__(self, data)
        # Then the OleStream object can be used as a read-only file object.

#--- OleDirectoryEntry -------------------------------------------------------

class OleDirectoryEntry:

"""
    OLE2 Directory Entry
    """
    #[PL] parsing code moved from OleFileIO.loaddirectory

# struct to parse directory entries:
    # <: little-endian byte order, standard sizes
    #    (note: this should guarantee that Q returns a 64 bits int)
    # 64s: string containing entry name in unicode UTF-16 (max 31 chars) + null char = 64 bytes
    # H: uint16, number of bytes used in name buffer, including null = (len+1)*2
    # B: uint8, dir entry type (between 0 and 5)
    # B: uint8, color: 0=black, 1=red
    # I: uint32, index of left child node in the red-black tree, NOSTREAM if none
    # I: uint32, index of right child node in the red-black tree, NOSTREAM if none
    # I: uint32, index of child root node if it is a storage, else NOSTREAM
    # 16s: CLSID, unique identifier (only used if it is a storage)
    # I: uint32, user flags
    # Q (was 8s): uint64, creation timestamp or zero
    # Q (was 8s): uint64, modification timestamp or zero
    # I: uint32, SID of first sector if stream or ministream, SID of 1st sector
    #    of stream containing ministreams if root entry, 0 otherwise
    # I: uint32, total stream size in bytes if stream (low 32 bits), 0 otherwise
    # I: uint32, total stream size in bytes if stream (high 32 bits), 0 otherwise
    STRUCT_DIRENTRY = '<64sHBBIII16sIQQIII'
    # size of a directory entry: 128 bytes
    DIRENTRY_SIZE = 128
    assert struct.calcsize(STRUCT_DIRENTRY) == DIRENTRY_SIZE

def __init__(self, entry, sid, olefile):
        """
        Constructor for an OleDirectoryEntry object.
        Parses a 128-bytes entry from the OLE Directory stream.

:param entry  : string (must be 128 bytes long)
        :param sid    : index of this directory entry in the OLE file directory
        :param olefile: OleFileIO containing this directory entry
        """
        self.sid = sid
        # ref to olefile is stored for future use
        self.olefile = olefile
        # kids is a list of children entries, if this entry is a storage:
        # (list of OleDirectoryEntry objects)
        self.kids = []
        # kids_dict is a dictionary of children entries, indexed by their
        # name in lowercase: used to quickly find an entry, and to detect
        # duplicates
        self.kids_dict = {}
        # flag used to detect if the entry is referenced more than once in
        # directory:
        self.used = False
        # decode DirEntry
        (
            self.name_raw, # 64s: string containing entry name in unicode UTF-16 (max 31 chars) + null char = 64 bytes
            self.namelength, # H: uint16, number of bytes used in name buffer, including null = (len+1)*2
            self.entry_type,
            self.color,
            self.sid_left,
            self.sid_right,
            self.sid_child,
            clsid,
            self.dwUserFlags,
            self.createTime,
            self.modifyTime,
            self.isectStart,
            self.sizeLow,
            self.sizeHigh
        ) = struct.unpack(OleDirectoryEntry.STRUCT_DIRENTRY, entry)
        if self.entry_type not in [STGTY_ROOT, STGTY_STORAGE, STGTY_STREAM, STGTY_EMPTY]:
            olefile._raise_defect(DEFECT_INCORRECT, 'unhandled OLE storage type')
        # only first directory entry can (and should) be root:
        if self.entry_type == STGTY_ROOT and sid != 0:
            olefile._raise_defect(DEFECT_INCORRECT, 'duplicate OLE root entry')
        if sid == 0 and self.entry_type != STGTY_ROOT:
            olefile._raise_defect(DEFECT_INCORRECT, 'incorrect OLE root entry')
        #log.debug(struct.unpack(fmt_entry, entry[:len_entry]))
        # name should be at most 31 unicode characters + null character,
        # so 64 bytes in total (31*2 + 2):
        if self.namelength>64:
            olefile._raise_defect(DEFECT_INCORRECT, 'incorrect DirEntry name length >64 bytes')
            # if exception not raised, namelength is set to the maximum value:
            self.namelength = 64
        # only characters without ending null char are kept:
        self.name_utf16 = self.name_raw[:(self.namelength-2)]
        #TODO: check if the name is actually followed by a null unicode character ([MS-CFB] 2.6.1)
        #TODO: check if the name does not contain forbidden characters:
        # [MS-CFB] 2.6.1: "The following characters are illegal and MUST NOT be part of the name: '/', '\', ':', '!'."
        # name is converted from UTF-16LE to the path encoding specified in the OleFileIO:
        self.name = olefile._decode_utf16_str(self.name_utf16)

log.debug('DirEntry SID=%d: %s' % (self.sid, repr(self.name)))
        log.debug(' - type: %d' % self.entry_type)
        log.debug(' - sect: %Xh' % self.isectStart)
        log.debug(' - SID left: %d, right: %d, child: %d' % (self.sid_left,
            self.sid_right, self.sid_child))

# sizeHigh is only used for 4K sectors, it should be zero for 512 bytes
        # sectors, BUT apparently some implementations set it as 0xFFFFFFFF, 1
        # or some other value so it cannot be raised as a defect in general:
        if olefile.sectorsize == 512:
            if self.sizeHigh != 0 and self.sizeHigh != 0xFFFFFFFF:
                log.debug('sectorsize=%d, sizeLow=%d, sizeHigh=%d (%X)' %
                    (olefile.sectorsize, self.sizeLow, self.sizeHigh, self.sizeHigh))
                olefile._raise_defect(DEFECT_UNSURE, 'incorrect OLE stream size')
            self.size = self.sizeLow
        else:
            self.size = self.sizeLow + (long(self.sizeHigh)<<32)
        log.debug(' - size: %d (sizeLow=%d, sizeHigh=%d)' % (self.size, self.sizeLow, self.sizeHigh))

self.clsid = _clsid(clsid)
        # a storage should have a null size, BUT some implementations such as
        # Word 8 for Mac seem to allow non-null values => Potential defect:
        if self.entry_type == STGTY_STORAGE and self.size != 0:
            olefile._raise_defect(DEFECT_POTENTIAL, 'OLE storage with size>0')
        # check if stream is not already referenced elsewhere:
        self.is_minifat = False
        if self.entry_type in (STGTY_ROOT, STGTY_STREAM) and self.size>0:
            if self.size < olefile.minisectorcutoff \
            and self.entry_type==STGTY_STREAM: # only streams can be in MiniFAT
                # ministream object
                self.is_minifat = True
            else:
                self.is_minifat = False
            olefile._check_duplicate_stream(self.isectStart, self.is_minifat)
        self.sect_chain = None

def build_sect_chain(self, olefile):
        if self.sect_chain:
            return
        if self.entry_type not in (STGTY_ROOT, STGTY_STREAM) or self.size == 0:
            return

self.sect_chain = list()

if self.is_minifat and not olefile.minifat:
            olefile.loadminifat()

next_sect = self.isectStart
        while next_sect != ENDOFCHAIN:
            self.sect_chain.append(next_sect)
            if self.is_minifat:
                next_sect = olefile.minifat[next_sect]
            else:
                next_sect = olefile.fat[next_sect]

def build_storage_tree(self):
        """
        Read and build the red-black tree attached to this OleDirectoryEntry
        object, if it is a storage.
        Note that this method builds a tree of all subentries, so it should
        only be called for the root object once.
        """
        log.debug('build_storage_tree: SID=%d - %s - sid_child=%d'
            % (self.sid, repr(self.name), self.sid_child))
        if self.sid_child != NOSTREAM:
            # if child SID is not NOSTREAM, then this entry is a storage.
            # Let's walk through the tree of children to fill the kids list:
            self.append_kids(self.sid_child)

# Note from OpenOffice documentation: the safest way is to
            # recreate the tree because some implementations may store broken
            # red-black trees...

# in the OLE file, entries are sorted on (length, name).
            # for convenience, we sort them on name instead:
            # (see rich comparison methods in this class)
            self.kids.sort()

def append_kids(self, child_sid):
        """
        Walk through red-black tree of children of this directory entry to add
        all of them to the kids list. (recursive method)

:param child_sid: index of child directory entry to use, or None when called
            first time for the root. (only used during recursion)
        """
        log.debug('append_kids: child_sid=%d' % child_sid)
        #[PL] this method was added to use simple recursion instead of a complex
        # algorithm.
        # if this is not a storage or a leaf of the tree, nothing to do:
        if child_sid == NOSTREAM:
            return
        # check if child SID is in the proper range:
        if child_sid<0 or child_sid>=len(self.olefile.direntries):
            self.olefile._raise_defect(DEFECT_INCORRECT, 'OLE DirEntry index out of range')
        else:
            # get child direntry:
            child = self.olefile._load_direntry(child_sid) #direntries[child_sid]
            log.debug('append_kids: child_sid=%d - %s - sid_left=%d, sid_right=%d, sid_child=%d'
                % (child.sid, repr(child.name), child.sid_left, child.sid_right, child.sid_child))
            # Check if kid was not already referenced in a storage:
            if child.used:
                self.olefile._raise_defect(DEFECT_INCORRECT,
                    'OLE Entry referenced more than once')
                return
            child.used = True
            # the directory entries are organized as a red-black tree.
            # (cf. Wikipedia for details)
            # First walk through left side of the tree:
            self.append_kids(child.sid_left)
            # Check if its name is not already used (case-insensitive):
            name_lower = child.name.lower()
            if name_lower in self.kids_dict:
                self.olefile._raise_defect(DEFECT_INCORRECT,
                    "Duplicate filename in OLE storage")
            # Then the child_sid OleDirectoryEntry object is appended to the
            # kids list and dictionary:
            self.kids.append(child)
            self.kids_dict[name_lower] = child
            # Finally walk through right side of the tree:
            self.append_kids(child.sid_right)
            # Afterwards build kid's own tree if it's also a storage:
            child.build_storage_tree()

def __eq__(self, other):
        "Compare entries by name"
        return self.name == other.name

def __lt__(self, other):
        "Compare entries by name"
        return self.name < other.name

def __ne__(self, other):
        return not self.__eq__(other)

def __le__(self, other):
        return self.__eq__(other) or self.__lt__(other)

# Reflected __lt__() and __le__() will be used for __gt__() and __ge__()

#TODO: replace by the same function as MS implementation ?
    # (order by name length first, then case-insensitive order)

def dump(self, tab = 0):
        "Dump this entry, and all its subentries (for debug purposes only)"
        TYPES = ["(invalid)", "(storage)", "(stream)", "(lockbytes)",
                 "(property)", "(root)"]
        try:
            type_name = TYPES[self.entry_type]
        except IndexError:
            type_name = '(UNKNOWN)'
        print(" "*tab + repr(self.name), type_name, end=' ')
        if self.entry_type in (STGTY_STREAM, STGTY_ROOT):
            print(self.size, "bytes", end=' ')
        print()
        if self.entry_type in (STGTY_STORAGE, STGTY_ROOT) and self.clsid:
            print(" "*tab + "{%s}" % self.clsid)

for kid in self.kids:
            kid.dump(tab + 2)

def getmtime(self):
        """
        Return modification time of a directory entry.

:returns: None if modification time is null, a python datetime object
            otherwise (UTC timezone)

new in version 0.26
        """
        if self.modifyTime == 0:
            return None
        return filetime2datetime(self.modifyTime)

def getctime(self):
        """
        Return creation time of a directory entry.

:returns: None if modification time is null, a python datetime object
            otherwise (UTC timezone)

new in version 0.26
        """
        if self.createTime == 0:
            return None
        return filetime2datetime(self.createTime)

#--- OleFileIO ----------------------------------------------------------------

class OleFileIO:
    """
    OLE container object

This class encapsulates the interface to an OLE 2 structured
    storage file.  Use the listdir and openstream methods to
    access the contents of this file.

Object names are given as a list of strings, one for each subentry
    level.  The root entry should be omitted.  For example, the following
    code extracts all image streams from a Microsoft Image Composer file::

ole = OleFileIO("fan.mic")

for entry in ole.listdir():
            if entry[1:2] == "Image":
                fin = ole.openstream(entry)
                fout = open(entry[0:1], "wb")
                while True:
                    s = fin.read(8192)
                    if not s:
                        break
                    fout.write(s)

You can use the viewer application provided with the Python Imaging
    Library to view the resulting files (which happens to be standard
    TIFF files).
    """

def __init__(self, filename=None, raise_defects=DEFECT_FATAL,
                 write_mode=False, debug=False, path_encoding=DEFAULT_PATH_ENCODING):
        """
        Constructor for the OleFileIO class.

:param filename: file to open.

- if filename is a string smaller than 1536 bytes, it is the path
              of the file to open. (bytes or unicode string)
            - if filename is a string longer than 1535 bytes, it is parsed
              as the content of an OLE file in memory. (bytes type only)
            - if filename is a file-like object (with read, seek and tell methods),
              it is parsed as-is.

:param raise_defects: minimal level for defects to be raised as exceptions.
            (use DEFECT_FATAL for a typical application, DEFECT_INCORRECT for a
            security-oriented application, see source code for details)

:param write_mode: bool, if True the file is opened in read/write mode instead
            of read-only by default.

:param debug: bool, set debug mode (deprecated, not used anymore)

:param path_encoding: None or str, name of the codec to use for path
            names (streams and storages), or None for Unicode.
            Unicode by default on Python 3+, UTF-8 on Python 2.x.
            (new in olefile 0.42, was hardcoded to Latin-1 until olefile v0.41)
        """
        # minimal level for defects to be raised as exceptions:
        self._raise_defects_level = raise_defects
        #: list of defects/issues not raised as exceptions:
        #: tuples of (exception type, message)
        self.parsing_issues = []
        self.write_mode = write_mode
        self.path_encoding = path_encoding
        # initialize all attributes to default values:
        self._filesize = None
        self.ministream = None
        self._used_streams_fat = []
        self._used_streams_minifat = []
        self.byte_order = None
        self.directory_fp = None
        self.direntries = None
        self.dll_version = None
        self.fat = None
        self.first_difat_sector = None
        self.first_dir_sector = None
        self.first_mini_fat_sector = None
        self.fp = None
        self.header_clsid = None
        self.header_signature = None
        self.metadata = None
        self.mini_sector_shift = None
        self.mini_sector_size = None
        self.mini_stream_cutoff_size = None
        self.minifat = None
        self.minifatsect = None
        # TODO: duplicates?
        self.minisectorcutoff = None
        self.minisectorsize = None
        self.ministream = None
        self.minor_version = None
        self.nb_sect = None
        self.num_difat_sectors = None
        self.num_dir_sectors = None
        self.num_fat_sectors = None
        self.num_mini_fat_sectors = None
        self.reserved1 = None
        self.reserved2 = None
        self.root = None
        self.sector_shift = None
        self.sector_size = None
        self.transaction_signature_number = None
        if filename:
            self.open(filename, write_mode=write_mode)

def __enter__(self):
        return self

def __exit__(self, *args):
        self.close()

def _raise_defect(self, defect_level, message, exception_type=IOError):
        """
        This method should be called for any defect found during file parsing.
        It may raise an IOError exception according to the minimal level chosen
        for the OleFileIO object.

:param defect_level: defect level, possible values are:

- DEFECT_UNSURE    : a case which looks weird, but not sure it's a defect
            - DEFECT_POTENTIAL : a potential defect
            - DEFECT_INCORRECT : an error according to specifications, but parsing can go on
            - DEFECT_FATAL     : an error which cannot be ignored, parsing is impossible

:param message: string describing the defect, used with raised exception.
        :param exception_type: exception class to be raised, IOError by default
        """
        # added by [PL]
        if defect_level >= self._raise_defects_level:
            log.error(message)
            raise exception_type(message)
        else:
            # just record the issue, no exception raised:
            self.parsing_issues.append((exception_type, message))
            log.warning(message)

def _decode_utf16_str(self, utf16_str, errors='replace'):
        """
        Decode a string encoded in UTF-16 LE format, as found in the OLE
        directory or in property streams. Return a string encoded
        according to the path_encoding specified for the OleFileIO object.

:param utf16_str: bytes string encoded in UTF-16 LE format
        :param errors: str, see python documentation for str.decode()
        :return: str, encoded according to path_encoding
        """
        unicode_str = utf16_str.decode('UTF-16LE', errors)
        if self.path_encoding:
            # an encoding has been specified for path names:
            return unicode_str.encode(self.path_encoding, errors)
        else:
            # path_encoding=None, return the Unicode string as-is:
            return unicode_str

def open(self, filename, write_mode=False):
        """
        Open an OLE2 file in read-only or read/write mode.
        Read and parse the header, FAT and directory.

:param filename: string-like or file-like object, OLE file to parse

- if filename is a string smaller than 1536 bytes, it is the path
              of the file to open. (bytes or unicode string)
            - if filename is a string longer than 1535 bytes, it is parsed
              as the content of an OLE file in memory. (bytes type only)
            - if filename is a file-like object (with read, seek and tell methods),
              it is parsed as-is.

:param write_mode: bool, if True the file is opened in read/write mode instead
            of read-only by default. (ignored if filename is not a path)
        """
        self.write_mode = write_mode
        #[PL] check if filename is a string-like or file-like object:
        # (it is better to check for a read() method)
        if hasattr(filename, 'read'):
            #TODO: also check seek and tell methods?
            # file-like object: use it directly
            self.fp = filename
        elif isinstance(filename, bytes) and len(filename) >= MINIMAL_OLEFILE_SIZE:
            # filename is a bytes string containing the OLE file to be parsed:
            # convert it to BytesIO
            self.fp = io.BytesIO(filename)
        else:
            # string-like object: filename of file on disk
            if self.write_mode:
                # open file in mode 'read with update, binary'
                # According to https://docs.python.org/2/library/functions.html#open
                # 'w' would truncate the file, 'a' may only append on some Unixes
                mode = 'r+b'
            else:
                # read-only mode by default
                mode = 'rb'
            self.fp = open(filename, mode)
        # obtain the filesize by using seek and tell, which should work on most
        # file-like objects:
        #TODO: do it above, using getsize with filename when possible?
        #TODO: fix code to fail with clear exception when filesize cannot be obtained
        filesize=0
        self.fp.seek(0, os.SEEK_END)
        try:
            filesize = self.fp.tell()
        finally:
            self.fp.seek(0)
        self._filesize = filesize
        log.debug('File size: %d bytes (%Xh)' % (self._filesize, self._filesize))

# lists of streams in FAT and MiniFAT, to detect duplicate references
        # (list of indexes of first sectors of each stream)
        self._used_streams_fat = []
        self._used_streams_minifat = []

header = self.fp.read(512)

if len(header) != 512 or header[:8] != MAGIC:
            log.debug('Magic = %r instead of %r' % (header[:8], MAGIC))
            self._raise_defect(DEFECT_FATAL, "not an OLE2 structured storage file")

# [PL] header structure according to AAF specifications:
        ##Header
        ##struct StructuredStorageHeader { // [offset from start (bytes), length (bytes)]
        ##BYTE _abSig[8]; // [00H,08] {0xd0, 0xcf, 0x11, 0xe0, 0xa1, 0xb1,
        ##                // 0x1a, 0xe1} for current version
        ##CLSID _clsid;   // [08H,16] reserved must be zero (WriteClassStg/
        ##                // GetClassFile uses root directory class id)
        ##USHORT _uMinorVersion; // [18H,02] minor version of the format: 33 is
        ##                       // written by reference implementation
        ##USHORT _uDllVersion;   // [1AH,02] major version of the dll/format: 3 for
        ##                       // 512-byte sectors, 4 for 4 KB sectors
        ##USHORT _uByteOrder;    // [1CH,02] 0xFFFE: indicates Intel byte-ordering
        ##USHORT _uSectorShift;  // [1EH,02] size of sectors in power-of-two;
        ##                       // typically 9 indicating 512-byte sectors
        ##USHORT _uMiniSectorShift; // [20H,02] size of mini-sectors in power-of-two;
        ##                          // typically 6 indicating 64-byte mini-sectors
        ##USHORT _usReserved; // [22H,02] reserved, must be zero
        ##ULONG _ulReserved1; // [24H,04] reserved, must be zero
        ##FSINDEX _csectDir; // [28H,04] must be zero for 512-byte sectors,
        ##                   // number of SECTs in directory chain for 4 KB
        ##                   // sectors
        ##FSINDEX _csectFat; // [2CH,04] number of SECTs in the FAT chain
        ##SECT _sectDirStart; // [30H,04] first SECT in the directory chain
        ##DFSIGNATURE _signature; // [34H,04] signature used for transactions; must
        ##                        // be zero. The reference implementation
        ##                        // does not support transactions
        ##ULONG _ulMiniSectorCutoff; // [38H,04] maximum size for a mini stream;
        ##                           // typically 4096 bytes
        ##SECT _sectMiniFatStart; // [3CH,04] first SECT in the MiniFAT chain
        ##FSINDEX _csectMiniFat; // [40H,04] number of SECTs in the MiniFAT chain
        ##SECT _sectDifStart; // [44H,04] first SECT in the DIFAT chain
        ##FSINDEX _csectDif; // [48H,04] number of SECTs in the DIFAT chain
        ##SECT _sectFat[109]; // [4CH,436] the SECTs of first 109 FAT sectors
        ##};

# [PL] header decoding:
        # '<' indicates little-endian byte ordering for Intel (cf. struct module help)
        fmt_header = '<8s16sHHHHHHLLLLLLLLLL'
        header_size = struct.calcsize(fmt_header)
        log.debug( "fmt_header size = %d, +FAT = %d" % (header_size, header_size + 109*4) )
        header1 = header[:header_size]
        (
            self.header_signature,
            self.header_clsid,
            self.minor_version,
            self.dll_version,
            self.byte_order,
            self.sector_shift,
            self.mini_sector_shift,
            self.reserved1,
            self.reserved2,
            self.num_dir_sectors,
            self.num_fat_sectors,
            self.first_dir_sector,
            self.transaction_signature_number,
            self.mini_stream_cutoff_size,
            self.first_mini_fat_sector,
            self.num_mini_fat_sectors,
            self.first_difat_sector,
            self.num_difat_sectors
        ) = struct.unpack(fmt_header, header1)
        log.debug( struct.unpack(fmt_header,    header1))

if self.header_signature != MAGIC:
            # OLE signature should always be present
            self._raise_defect(DEFECT_FATAL, "incorrect OLE signature")
        if self.header_clsid != bytearray(16):
            # according to AAF specs, CLSID should always be zero
            self._raise_defect(DEFECT_INCORRECT, "incorrect CLSID in OLE header")
        log.debug( "Minor Version = %d" % self.minor_version )
        # TODO: according to MS-CFB, minor version should be 0x003E
        log.debug( "DLL Version   = %d (expected: 3 or 4)" % self.dll_version )
        if self.dll_version not in [3, 4]:
            # version 3: usual format, 512 bytes per sector
            # version 4: large format, 4K per sector
            self._raise_defect(DEFECT_INCORRECT, "incorrect DllVersion in OLE header")
        log.debug( "Byte Order    = %X (expected: FFFE)" % self.byte_order )
        if self.byte_order != 0xFFFE:
            # For now only common little-endian documents are handled correctly
            self._raise_defect(DEFECT_INCORRECT, "incorrect ByteOrder in OLE header")
            # TODO: add big-endian support for documents created on Mac ?
            # But according to [MS-CFB] ? v20140502, ByteOrder MUST be 0xFFFE.
        self.sector_size = 2**self.sector_shift
        log.debug( "Sector Size   = %d bytes (expected: 512 or 4096)" % self.sector_size )
        if self.sector_size not in [512, 4096]:
            self._raise_defect(DEFECT_INCORRECT, "incorrect sector_size in OLE header")
        if (self.dll_version==3 and self.sector_size!=512) \
        or (self.dll_version==4 and self.sector_size!=4096):
            self._raise_defect(DEFECT_INCORRECT, "sector_size does not match DllVersion in OLE header")
        self.mini_sector_size = 2**self.mini_sector_shift
        log.debug( "MiniFAT Sector Size   = %d bytes (expected: 64)" % self.mini_sector_size )
        if self.mini_sector_size not in [64]:
            self._raise_defect(DEFECT_INCORRECT, "incorrect mini_sector_size in OLE header")
        if self.reserved1 != 0 or self.reserved2 != 0:
            self._raise_defect(DEFECT_INCORRECT, "incorrect OLE header (non-null reserved bytes)")
        log.debug( "Number of Directory sectors = %d" % self.num_dir_sectors )
        # Number of directory sectors (only allowed if DllVersion != 3)
        if self.sector_size==512 and self.num_dir_sectors!=0:
            self._raise_defect(DEFECT_INCORRECT, "incorrect number of directory sectors in OLE header")
        log.debug( "Number of FAT sectors = %d" % self.num_fat_sectors )
        # num_fat_sectors = number of FAT sectors in the file
        log.debug( "First Directory sector  = %Xh" % self.first_dir_sector )
        # first_dir_sector = 1st sector containing the directory
        log.debug( "Transaction Signature Number    = %d" % self.transaction_signature_number )
        # Signature should be zero, BUT some implementations do not follow this
        # rule => only a potential defect:
        # (according to MS-CFB, may be != 0 for applications supporting file
        # transactions)
        if self.transaction_signature_number != 0:
            self._raise_defect(DEFECT_POTENTIAL, "incorrect OLE header (transaction_signature_number>0)")
        log.debug( "Mini Stream cutoff size = %Xh (expected: 1000h)" % self.mini_stream_cutoff_size )
        # MS-CFB: This integer field MUST be set to 0x00001000. This field
        # specifies the maximum size of a user-defined data stream allocated
        # from the mini FAT and mini stream, and that cutoff is 4096 bytes.
        # Any user-defined data stream larger than or equal to this cutoff size
        # must be allocated as normal sectors from the FAT.
        if self.mini_stream_cutoff_size != 0x1000:
            self._raise_defect(DEFECT_INCORRECT, "incorrect mini_stream_cutoff_size in OLE header")
            # if no exception is raised, the cutoff size is fixed to 0x1000
            log.warning('Fixing the mini_stream_cutoff_size to 4096 (mandatory value) instead of %d' %
                        self.mini_stream_cutoff_size)
            self.mini_stream_cutoff_size = 0x1000
        # TODO: check if these values are OK
        log.debug( "First MiniFAT sector      = %Xh" % self.first_mini_fat_sector )
        log.debug( "Number of MiniFAT sectors = %d" % self.num_mini_fat_sectors )
        log.debug( "First DIFAT sector        = %Xh" % self.first_difat_sector )
        log.debug( "Number of DIFAT sectors   = %d" % self.num_difat_sectors )

# calculate the number of sectors in the file
        # (-1 because header doesn't count)
        self.nb_sect = ( (filesize + self.sector_size-1) // self.sector_size) - 1
        log.debug( "Maximum number of sectors in the file: %d (%Xh)" % (self.nb_sect, self.nb_sect))
        #TODO: change this test, because an OLE file MAY contain other data
        # after the last sector.

# file clsid
        self.header_clsid = _clsid(header[8:24])

#TODO: remove redundant attributes, and fix the code which uses them?
        self.sectorsize = self.sector_size #1 << i16(header, 30)
        self.minisectorsize = self.mini_sector_size  #1 << i16(header, 32)
        self.minisectorcutoff = self.mini_stream_cutoff_size # i32(header, 56)

# check known streams for duplicate references (these are always in FAT,
        # never in MiniFAT):
        self._check_duplicate_stream(self.first_dir_sector)
        # check MiniFAT only if it is not empty:
        if self.num_mini_fat_sectors:
            self._check_duplicate_stream(self.first_mini_fat_sector)
        # check DIFAT only if it is not empty:
        if self.num_difat_sectors:
            self._check_duplicate_stream(self.first_difat_sector)

# Load file allocation tables
        self.loadfat(header)
        # Load directory.  This sets both the direntries list (ordered by sid)
        # and the root (ordered by hierarchy) members.
        self.loaddirectory(self.first_dir_sector)
        self.minifatsect = self.first_mini_fat_sector

def close(self):
        """
        close the OLE file, to release the file object
        """
        self.fp.close()

def _check_duplicate_stream(self, first_sect, minifat=False):
        """
        Checks if a stream has not been already referenced elsewhere.
        This method should only be called once for each known stream, and only
        if stream size is not null.

:param first_sect: int, index of first sector of the stream in FAT
        :param minifat: bool, if True, stream is located in the MiniFAT, else in the FAT
        """
        if minifat:
            log.debug('_check_duplicate_stream: sect=%Xh in MiniFAT' % first_sect)
            used_streams = self._used_streams_minifat
        else:
            log.debug('_check_duplicate_stream: sect=%Xh in FAT' % first_sect)
            # some values can be safely ignored (not a real stream):
            if first_sect in (DIFSECT,FATSECT,ENDOFCHAIN,FREESECT):
                return
            used_streams = self._used_streams_fat
        #TODO: would it be more efficient using a dict or hash values, instead
        #      of a list of long ?
        if first_sect in used_streams:
            self._raise_defect(DEFECT_INCORRECT, 'Stream referenced twice')
        else:
            used_streams.append(first_sect)

def dumpfat(self, fat, firstindex=0):
        """
        Display a part of FAT in human-readable form for debugging purposes
        """
        # dictionary to convert special FAT values in human-readable strings
        VPL = 8 # values per line (8+1 * 8+1 = 81)
        fatnames = {
            FREESECT:   "..free..",
            ENDOFCHAIN: "[ END. ]",
            FATSECT:    "FATSECT ",
            DIFSECT:    "DIFSECT "
            }
        nbsect = len(fat)
        nlines = (nbsect+VPL-1)//VPL
        print("index", end=" ")
        for i in range(VPL):
            print("%8X" % i, end=" ")
        print()
        for l in range(nlines):
            index = l*VPL
            print("%6X:" % (firstindex+index), end=" ")
            for i in range(index, index+VPL):
                if i>=nbsect:
                    break
                sect = fat[i]
                aux = sect & 0xFFFFFFFF  # JYTHON-WORKAROUND
                if aux in fatnames:
                    name = fatnames[aux]
                else:
                    if sect == i+1:
                        name = "    --->"
                    else:
                        name = "%8X" % sect
                print(name, end=" ")
            print()

def dumpsect(self, sector, firstindex=0):
        """
        Display a sector in a human-readable form, for debugging purposes
        """
        VPL=8 # number of values per line (8+1 * 8+1 = 81)
        tab = array.array(UINT32, sector)
        if sys.byteorder == 'big':
            tab.byteswap()
        nbsect = len(tab)
        nlines = (nbsect+VPL-1)//VPL
        print("index", end=" ")
        for i in range(VPL):
            print("%8X" % i, end=" ")
        print()
        for l in range(nlines):
            index = l*VPL
            print("%6X:" % (firstindex+index), end=" ")
            for i in range(index, index+VPL):
                if i>=nbsect:
                    break
                sect = tab[i]
                name = "%8X" % sect
                print(name, end=" ")
            print()

def sect2array(self, sect):
        """
        convert a sector to an array of 32 bits unsigned integers,
        swapping bytes on big endian CPUs such as PowerPC (old Macs)
        """
        a = array.array(UINT32, sect)
        # if CPU is big endian, swap bytes:
        if sys.byteorder == 'big':
            a.byteswap()
        return a

def loadfat_sect(self, sect):
        """
        Adds the indexes of the given sector to the FAT

:param sect: string containing the first FAT sector, or array of long integers
        :returns: index of last FAT sector.
        """
        # a FAT sector is an array of ulong integers.
        if isinstance(sect, array.array):
            # if sect is already an array it is directly used
            fat1 = sect
        else:
            # if it's a raw sector, it is parsed in an array
            fat1 = self.sect2array(sect)
            # Display the sector contents only if the logging level is debug:
            if log.isEnabledFor(logging.DEBUG):
                self.dumpsect(sect)
        # The FAT is a sector chain starting at the first index of itself.
        # initialize isect, just in case:
        isect = None
        for isect in fat1:
            isect = isect & 0xFFFFFFFF  # JYTHON-WORKAROUND
            log.debug("isect = %X" % isect)
            if isect == ENDOFCHAIN or isect == FREESECT:
                # the end of the sector chain has been reached
                log.debug("found end of sector chain")
                break
            # read the FAT sector
            s = self.getsect(isect)
            # parse it as an array of 32 bits integers, and add it to the
            # global FAT array
            nextfat = self.sect2array(s)
            self.fat = self.fat + nextfat
        return isect

def loadfat(self, header):
        """
        Load the FAT table.
        """
        # The 1st sector of the file contains sector numbers for the first 109
        # FAT sectors, right after the header which is 76 bytes long.
        # (always 109, whatever the sector size: 512 bytes = 76+4*109)
        # Additional sectors are described by DIF blocks

log.debug('Loading the FAT table, starting with the 1st sector after the header')
        sect = header[76:512]
        log.debug( "len(sect)=%d, so %d integers" % (len(sect), len(sect)//4) )
        #fat    = []
        # [PL] FAT is an array of 32 bits unsigned ints, it's more effective
        # to use an array than a list in Python.
        # It's initialized as empty first:
        self.fat = array.array(UINT32)
        self.loadfat_sect(sect)
        #self.dumpfat(self.fat)
##      for i in range(0, len(sect), 4):
##          ix = i32(sect, i)
##          #[PL] if ix == -2 or ix == -1: # ix == 0xFFFFFFFE or ix == 0xFFFFFFFF:
##          if ix == 0xFFFFFFFE or ix == 0xFFFFFFFF:
##              break
##          s = self.getsect(ix)
##          #fat    = fat + [i32(s, i) for i in range(0, len(s), 4)]
##          fat = fat + array.array(UINT32, s)
        if self.num_difat_sectors != 0:
            log.debug('DIFAT is used, because file size > 6.8MB.')
            # [PL] There's a DIFAT because file is larger than 6.8MB
            # some checks just in case:
            if self.num_fat_sectors <= 109:
                # there must be at least 109 blocks in header and the rest in
                # DIFAT, so number of sectors must be >109.
                self._raise_defect(DEFECT_INCORRECT, 'incorrect DIFAT, not enough sectors')
            if self.first_difat_sector >= self.nb_sect:
                # initial DIFAT block index must be valid
                self._raise_defect(DEFECT_FATAL, 'incorrect DIFAT, first index out of range')
            log.debug( "DIFAT analysis..." )
            # We compute the necessary number of DIFAT sectors :
            # Number of pointers per DIFAT sector = (sectorsize/4)-1
            # (-1 because the last pointer is the next DIFAT sector number)
            nb_difat_sectors = (self.sectorsize//4)-1
            # (if 512 bytes: each DIFAT sector = 127 pointers + 1 towards next DIFAT sector)
            nb_difat = (self.num_fat_sectors-109 + nb_difat_sectors-1)//nb_difat_sectors
            log.debug( "nb_difat = %d" % nb_difat )
            if self.num_difat_sectors != nb_difat:
                raise IOError('incorrect DIFAT')
            isect_difat = self.first_difat_sector
            for i in iterrange(nb_difat):
                log.debug( "DIFAT block %d, sector %X" % (i, isect_difat) )
                #TODO: check if corresponding FAT SID = DIFSECT
                sector_difat = self.getsect(isect_difat)
                difat = self.sect2array(sector_difat)
                # Display the sector contents only if the logging level is debug:
                if log.isEnabledFor(logging.DEBUG):
                    self.dumpsect(sector_difat)
                self.loadfat_sect(difat[:nb_difat_sectors])
                # last DIFAT pointer is next DIFAT sector:
                isect_difat = difat[nb_difat_sectors]
                log.debug( "next DIFAT sector: %X" % isect_difat )
            # checks:
            if isect_difat not in [ENDOFCHAIN, FREESECT]:
                # last DIFAT pointer value must be ENDOFCHAIN or FREESECT
                raise IOError('incorrect end of DIFAT')
##          if len(self.fat) != self.num_fat_sectors:
##              # FAT should contain num_fat_sectors blocks
##              print("FAT length: %d instead of %d" % (len(self.fat), self.num_fat_sectors))
##              raise IOError('incorrect DIFAT')
        else:
            log.debug('No DIFAT, because file size < 6.8MB.')
        # since FAT is read from fixed-size sectors, it may contain more values
        # than the actual number of sectors in the file.
        # Keep only the relevant sector indexes:
        if len(self.fat) > self.nb_sect:
            log.debug('len(fat)=%d, shrunk to nb_sect=%d' % (len(self.fat), self.nb_sect))
            self.fat = self.fat[:self.nb_sect]
        log.debug('FAT references %d sectors / Maximum %d sectors in file' % (len(self.fat), self.nb_sect))
        # Display the FAT contents only if the logging level is debug:
        if log.isEnabledFor(logging.DEBUG):
            log.debug('\nFAT:')
            self.dumpfat(self.fat)

def loadminifat(self):
        """
        Load the MiniFAT table.
        """
        # MiniFAT is stored in a standard  sub-stream, pointed to by a header
        # field.
        # NOTE: there are two sizes to take into account for this stream:
        # 1) Stream size is calculated according to the number of sectors
        #    declared in the OLE header. This allocated stream may be more than
        #    needed to store the actual sector indexes.
        # (self.num_mini_fat_sectors is the number of sectors of size self.sector_size)
        stream_size = self.num_mini_fat_sectors * self.sector_size
        # 2) Actually used size is calculated by dividing the MiniStream size
        #    (given by root entry size) by the size of mini sectors, *4 for
        #    32 bits indexes:
        nb_minisectors = (self.root.size + self.mini_sector_size-1) // self.mini_sector_size
        used_size = nb_minisectors * 4
        log.debug('loadminifat(): minifatsect=%d, nb FAT sectors=%d, used_size=%d, stream_size=%d, nb MiniSectors=%d' %
            (self.minifatsect, self.num_mini_fat_sectors, used_size, stream_size, nb_minisectors))
        if used_size > stream_size:
            # This is not really a problem, but may indicate a wrong implementation:
            self._raise_defect(DEFECT_INCORRECT, 'OLE MiniStream is larger than MiniFAT')
        # In any case, first read stream_size:
        s = self._open(self.minifatsect, stream_size, force_FAT=True).read()
        #[PL] Old code replaced by an array:
        #self.minifat = [i32(s, i) for i in range(0, len(s), 4)]
        self.minifat = self.sect2array(s)
        # Then shrink the array to used size, to avoid indexes out of MiniStream:
        log.debug('MiniFAT shrunk from %d to %d sectors' % (len(self.minifat), nb_minisectors))
        self.minifat = self.minifat[:nb_minisectors]
        log.debug('loadminifat(): len=%d' % len(self.minifat))
        # Display the FAT contents only if the logging level is debug:
        if log.isEnabledFor(logging.DEBUG):
            log.debug('\nMiniFAT:')
            self.dumpfat(self.minifat)

def getsect(self, sect):
        """
        Read given sector from file on disk.

:param sect: int, sector index
        :returns: a string containing the sector data.
        """
        # From [MS-CFB]: A sector number can be converted into a byte offset
        # into the file by using the following formula:
        # (sector number + 1) x Sector Size.
        # This implies that sector #0 of the file begins at byte offset Sector
        # Size, not at 0.

# [PL] the original code in PIL was wrong when sectors are 4KB instead of
        # 512 bytes:
        #self.fp.seek(512 + self.sectorsize * sect)
        #[PL]: added safety checks:
        #print("getsect(%X)" % sect)
        try:
            self.fp.seek(self.sectorsize * (sect+1))
        except:
            log.debug('getsect(): sect=%X, seek=%d, filesize=%d' %
                (sect, self.sectorsize*(sect+1), self._filesize))
            self._raise_defect(DEFECT_FATAL, 'OLE sector index out of range')
        sector = self.fp.read(self.sectorsize)
        if len(sector) != self.sectorsize:
            log.debug('getsect(): sect=%X, read=%d, sectorsize=%d' %
                (sect, len(sector), self.sectorsize))
            self._raise_defect(DEFECT_FATAL, 'incomplete OLE sector')
        return sector

def write_sect(self, sect, data, padding=b'\x00'):
        """
        Write given sector to file on disk.

:param sect: int, sector index
        :param data: bytes, sector data
        :param padding: single byte, padding character if data < sector size
        """
        if not isinstance(data, bytes):
            raise TypeError("write_sect: data must be a bytes string")
        if not isinstance(padding, bytes) or len(padding)!=1:
            raise TypeError("write_sect: padding must be a bytes string of 1 char")
        #TODO: we could allow padding=None for no padding at all
        try:
            self.fp.seek(self.sectorsize * (sect+1))
        except:
            log.debug('write_sect(): sect=%X, seek=%d, filesize=%d' %
                (sect, self.sectorsize*(sect+1), self._filesize))
            self._raise_defect(DEFECT_FATAL, 'OLE sector index out of range')
        if len(data) < self.sectorsize:
            # add padding
            data += padding * (self.sectorsize - len(data))
        elif len(data) < self.sectorsize:
            raise ValueError("Data is larger than sector size")
        self.fp.write(data)

def _write_mini_sect(self, fp_pos, data, padding = b'\x00'):
        """
        Write given sector to file on disk.

:param fp_pos: int, file position
        :param data: bytes, sector data
        :param padding: single byte, padding character if data < sector size
        """
        if not isinstance(data, bytes):
            raise TypeError("write_mini_sect: data must be a bytes string")
        if not isinstance(padding, bytes) or len(padding) != 1:
            raise TypeError("write_mini_sect: padding must be a bytes string of 1 char")

try:
            self.fp.seek(fp_pos)
        except:
            log.debug('write_mini_sect(): fp_pos=%d, filesize=%d' %
                      (fp_pos, self._filesize))
            self._raise_defect(DEFECT_FATAL, 'OLE sector index out of range')
        len_data = len(data)
        if len_data < self.mini_sector_size:
            data += padding * (self.mini_sector_size - len_data)
        if self.mini_sector_size < len_data:
            raise ValueError("Data is larger than sector size")
        self.fp.write(data)

def loaddirectory(self, sect):
        """
        Load the directory.

:param sect: sector index of directory stream.
        """
        log.debug('Loading the Directory:')
        # The directory is  stored in a standard
        # substream, independent of its size.

# open directory stream as a read-only file:
        # (stream size is not known in advance)
        self.directory_fp = self._open(sect, force_FAT=True)

#[PL] to detect malformed documents and avoid DoS attacks, the maximum
        # number of directory entries can be calculated:
        max_entries = self.directory_fp.size // 128
        log.debug('loaddirectory: size=%d, max_entries=%d' %
            (self.directory_fp.size, max_entries))

# Create list of directory entries
        #self.direntries = []
        # We start with a list of "None" object
        self.direntries = [None] * max_entries
##        for sid in iterrange(max_entries):
##            entry = fp.read(128)
##            if not entry:
##                break
##            self.direntries.append(OleDirectoryEntry(entry, sid, self))
        # load root entry:
        root_entry = self._load_direntry(0)
        # Root entry is the first entry:
        self.root = self.direntries[0]
        # TODO: read ALL directory entries (ignore bad entries?)
        # TODO: adapt build_storage_tree to avoid duplicate reads
        # for i in range(1, max_entries):
        #     self._load_direntry(i)
        # read and build all storage trees, starting from the root:
        self.root.build_storage_tree()

def _load_direntry (self, sid):
        """
        Load a directory entry from the directory.
        This method should only be called once for each storage/stream when
        loading the directory.

:param sid: index of storage/stream in the directory.
        :returns: a OleDirectoryEntry object

:exception IOError: if the entry has always been referenced.
        """
        # check if SID is OK:
        if sid<0 or sid>=len(self.direntries):
            self._raise_defect(DEFECT_FATAL, "OLE directory index out of range")
        # check if entry was already referenced:
        if self.direntries[sid] is not None:
            self._raise_defect(DEFECT_INCORRECT,
                "double reference for OLE stream/storage")
            # if exception not raised, return the object
            return self.direntries[sid]
        self.directory_fp.seek(sid * 128)
        entry = self.directory_fp.read(128)
        self.direntries[sid] = OleDirectoryEntry(entry, sid, self)
        return self.direntries[sid]

def dumpdirectory(self):
        """
        Dump directory (for debugging only)
        """
        self.root.dump()

def _open(self, start, size = UNKNOWN_SIZE, force_FAT=False):
        """
        Open a stream, either in FAT or MiniFAT according to its size.
        (openstream helper)

:param start: index of first sector
        :param size: size of stream (or nothing if size is unknown)
        :param force_FAT: if False (default), stream will be opened in FAT or MiniFAT
            according to size. If True, it will always be opened in FAT.
        """
        log.debug('OleFileIO.open(): sect=%Xh, size=%d, force_FAT=%s' %
            (start, size, str(force_FAT)))
        # stream size is compared to the mini_stream_cutoff_size threshold:
        if size < self.minisectorcutoff and not force_FAT:
            # ministream object
            if not self.ministream:
                # load MiniFAT if it wasn't already done:
                self.loadminifat()
                # The first sector index of the miniFAT stream is stored in the
                # root directory entry:
                size_ministream = self.root.size
                log.debug('Opening MiniStream: sect=%Xh, size=%d' %
                    (self.root.isectStart, size_ministream))
                self.ministream = self._open(self.root.isectStart,
                    size_ministream, force_FAT=True)
            return OleStream(fp=self.ministream, sect=start, size=size,
                             offset=0, sectorsize=self.minisectorsize,
                             fat=self.minifat, filesize=self.ministream.size,
                             olefileio=self)
        else:
            # standard stream
            return OleStream(fp=self.fp, sect=start, size=size,
                             offset=self.sectorsize,
                             sectorsize=self.sectorsize, fat=self.fat,
                             filesize=self._filesize,
                             olefileio=self)

def _list(self, files, prefix, node, streams=True, storages=False):
        """
        listdir helper

:param files: list of files to fill in
        :param prefix: current location in storage tree (list of names)
        :param node: current node (OleDirectoryEntry object)
        :param streams: bool, include streams if True (True by default) - new in v0.26
        :param storages: bool, include storages if True (False by default) - new in v0.26
            (note: the root storage is never included)
        """
        prefix = prefix + [node.name]
        for entry in node.kids:
            if entry.entry_type == STGTY_STORAGE:
                # this is a storage
                if storages:
                    # add it to the list
                    files.append(prefix[1:] + [entry.name])
                # check its kids
                self._list(files, prefix, entry, streams, storages)
            elif entry.entry_type == STGTY_STREAM:
                # this is a stream
                if streams:
                    # add it to the list
                    files.append(prefix[1:] + [entry.name])
            else:
                self._raise_defect(DEFECT_INCORRECT, 'The directory tree contains an entry which is not a stream nor a storage.')

def listdir(self, streams=True, storages=False):
        """
        Return a list of streams and/or storages stored in this file

:param streams: bool, include streams if True (True by default) - new in v0.26
        :param storages: bool, include storages if True (False by default) - new in v0.26
            (note: the root storage is never included)
        :returns: list of stream and/or storage paths
        """
        files = []
        self._list(files, [], self.root, streams, storages)
        return files

def _find(self, filename):
        """
        Returns directory entry of given filename. (openstream helper)
        Note: this method is case-insensitive.

:param filename: path of stream in storage tree (except root entry), either:

- a string using Unix path syntax, for example:
              'storage_1/storage_1.2/stream'
            - or a list of storage filenames, path to the desired stream/storage.
              Example: ['storage_1', 'storage_1.2', 'stream']

:returns: sid of requested filename
        :exception IOError: if file not found
        """

# if filename is a string instead of a list, split it on slashes to
        # convert to a list:
        if isinstance(filename, basestring):
            filename = filename.split('/')
        # walk across storage tree, following given path:
        node = self.root
        for name in filename:
            for kid in node.kids:
                if kid.name.lower() == name.lower():
                    break
            else:
                raise IOError("file not found")
            node = kid
        return node.sid

def openstream(self, filename):
        """
        Open a stream as a read-only file object (BytesIO).
        Note: filename is case-insensitive.

:param filename: path of stream in storage tree (except root entry), either:

:returns: file object (read-only)
        :exception IOError: if filename not found, or if this is not a stream.
        """
        sid = self._find(filename)
        entry = self.direntries[sid]
        if entry.entry_type != STGTY_STREAM:
            raise IOError("this file is not a stream")
        return self._open(entry.isectStart, entry.size)

def _write_mini_stream(self, entry, data_to_write):
        if not entry.sect_chain:
            entry.build_sect_chain(self)
        nb_sectors = len(entry.sect_chain)

if not self.root.sect_chain:
            self.root.build_sect_chain(self)
        block_size = self.sector_size // self.mini_sector_size
        for idx, sect in enumerate(entry.sect_chain):
            sect_base = sect // block_size
            sect_offset = sect % block_size
            fp_pos = (self.root.sect_chain[sect_base] + 1)*self.sector_size + sect_offset*self.mini_sector_size
            if idx < (nb_sectors - 1):
                data_per_sector = data_to_write[idx * self.mini_sector_size: (idx + 1) * self.mini_sector_size]
            else:
                data_per_sector = data_to_write[idx * self.mini_sector_size:]
            self._write_mini_sect(fp_pos, data_per_sector)

def write_stream(self, stream_name, data):
        """
        Write a stream to disk. For now, it is only possible to replace an
        existing stream by data of the same size.

:param stream_name: path of stream in storage tree (except root entry), either:

:param data: bytes, data to be written, must be the same size as the original
            stream.
        """
        if not isinstance(data, bytes):
            raise TypeError("write_stream: data must be a bytes string")
        sid = self._find(stream_name)
        entry = self.direntries[sid]
        if entry.entry_type != STGTY_STREAM:
            raise IOError("this is not a stream")
        size = entry.size
        if size != len(data):
            raise ValueError("write_stream: data must be the same size as the existing stream")
        if size < self.minisectorcutoff and entry.entry_type != STGTY_ROOT:
            return self._write_mini_stream(entry = entry, data_to_write = data)

sect = entry.isectStart
        # number of sectors to write
        nb_sectors = (size + (self.sectorsize-1)) // self.sectorsize
        log.debug('nb_sectors = %d' % nb_sectors)
        for i in range(nb_sectors):
##            try:
##                self.fp.seek(offset + self.sectorsize * sect)
##            except:
##                log.debug('sect=%d, seek=%d' %
##                    (sect, offset+self.sectorsize*sect))
##                raise IOError('OLE sector index out of range')
            # extract one sector from data, the last one being smaller:
            if i<(nb_sectors-1):
                data_sector = data [i*self.sectorsize : (i+1)*self.sectorsize]
                #TODO: comment this if it works
                assert(len(data_sector)==self.sectorsize)
            else:
                data_sector = data [i*self.sectorsize:]
                #TODO: comment this if it works
                log.debug('write_stream: size=%d sectorsize=%d data_sector=%Xh size%%sectorsize=%d'
                    % (size, self.sectorsize, len(data_sector), size % self.sectorsize))
                assert(len(data_sector) % self.sectorsize==size % self.sectorsize)
            self.write_sect(sect, data_sector)
##            self.fp.write(data_sector)
            # jump to next sector in the FAT:
            try:
                sect = self.fat[sect]
            except IndexError:
                # [PL] if pointer is out of the FAT an exception is raised
                raise IOError('incorrect OLE FAT, sector index out of range')
        #[PL] Last sector should be a "end of chain" marker:
        if sect != ENDOFCHAIN:
            raise IOError('incorrect last sector index in OLE stream')

def get_type(self, filename):
        """
        Test if given filename exists as a stream or a storage in the OLE
        container, and return its type.

:param filename: path of stream in storage tree. (see openstream for syntax)
        :returns: False if object does not exist, its entry type (>0) otherwise:

- STGTY_STREAM: a stream
            - STGTY_STORAGE: a storage
            - STGTY_ROOT: the root entry
        """
        try:
            sid = self._find(filename)
            entry = self.direntries[sid]
            return entry.entry_type
        except:
            return False

def getclsid(self, filename):
        """
        Return clsid of a stream/storage.

:param filename: path of stream/storage in storage tree. (see openstream for
            syntax)
        :returns: Empty string if clsid is null, a printable representation of the clsid otherwise

new in version 0.44
        """
        sid = self._find(filename)
        entry = self.direntries[sid]
        return entry.clsid

def getmtime(self, filename):
        """
        Return modification time of a stream/storage.

:param filename: path of stream/storage in storage tree. (see openstream for
            syntax)
        :returns: None if modification time is null, a python datetime object
            otherwise (UTC timezone)

new in version 0.26
        """
        sid = self._find(filename)
        entry = self.direntries[sid]
        return entry.getmtime()

def getctime(self, filename):
        """
        Return creation time of a stream/storage.

:param filename: path of stream/storage in storage tree. (see openstream for
            syntax)
        :returns: None if creation time is null, a python datetime object
            otherwise (UTC timezone)

new in version 0.26
        """
        sid = self._find(filename)
        entry = self.direntries[sid]
        return entry.getctime()

def exists(self, filename):
        """
        Test if given filename exists as a stream or a storage in the OLE
        container.
        Note: filename is case-insensitive.

:param filename: path of stream in storage tree. (see openstream for syntax)
        :returns: True if object exist, else False.
        """
        try:
            sid = self._find(filename)
            return True
        except:
            return False

def get_size(self, filename):
        """
        Return size of a stream in the OLE container, in bytes.

:param filename: path of stream in storage tree (see openstream for syntax)
        :returns: size in bytes (long integer)
        :exception IOError: if file not found
        :exception TypeError: if this is not a stream.
        """
        sid = self._find(filename)
        entry = self.direntries[sid]
        if entry.entry_type != STGTY_STREAM:
            #TODO: Should it return zero instead of raising an exception ?
            raise TypeError('object is not an OLE stream')
        return entry.size

def get_rootentry_name(self):
        """
        Return root entry name. Should usually be 'Root Entry' or 'R' in most
        implementations.
        """
        return self.root.name

def getproperties(self, filename, convert_time=False, no_conversion=None):
        """
        Return properties described in substream.

:param filename: path of stream in storage tree (see openstream for syntax)
        :param convert_time: bool, if True timestamps will be converted to Python datetime
        :param no_conversion: None or list of int, timestamps not to be converted
            (for example total editing time is not a real timestamp)

:returns: a dictionary of values indexed by id (integer)
        """
        #REFERENCE: [MS-OLEPS] https://msdn.microsoft.com/en-us/library/dd942421.aspx
        # make sure no_conversion is a list, just to simplify code below:
        if no_conversion == None:
            no_conversion = []
        # stream path as a string to report exceptions:
        streampath = filename
        if not isinstance(streampath, str):
            streampath = '/'.join(streampath)

fp = self.openstream(filename)

data = {}

try:
            # header
            s = fp.read(28)
            clsid = _clsid(s[8:24])

# format id
            s = fp.read(20)
            fmtid = _clsid(s[:16])
            fp.seek(i32(s, 16))

# get section
            s = b"****" + fp.read(i32(fp.read(4))-4)
            # number of properties:
            num_props = i32(s, 4)
        except BaseException as exc:
            # catch exception while parsing property header, and only raise
            # a DEFECT_INCORRECT then return an empty dict, because this is not
            # a fatal error when parsing the whole file
            msg = 'Error while parsing properties header in stream %s: %s' % (
                repr(streampath), exc)
            self._raise_defect(DEFECT_INCORRECT, msg, type(exc))
            return data

# clamp num_props based on the data length
        num_props = min(num_props, int(len(s) / 8))

for i in iterrange(num_props):
            property_id = 0 # just in case of an exception
            try:
                property_id = i32(s, 8+i*8)
                offset = i32(s, 12+i*8)
                property_type = i32(s, offset)

log.debug('property id=%d: type=%d offset=%X' % (property_id, property_type, offset))

# test for common types first (should perhaps use
                # a dictionary instead?)

if property_type == VT_I2: # 16-bit signed integer
                    value = i16(s, offset+4)
                    if value >= 32768:
                        value = value - 65536
                elif property_type == VT_UI2: # 2-byte unsigned integer
                    value = i16(s, offset+4)
                elif property_type in (VT_I4, VT_INT, VT_ERROR):
                    # VT_I4: 32-bit signed integer
                    # VT_ERROR: HRESULT, similar to 32-bit signed integer,
                    # see https://msdn.microsoft.com/en-us/library/cc230330.aspx
                    value = i32(s, offset+4)
                elif property_type in (VT_UI4, VT_UINT): # 4-byte unsigned integer
                    value = i32(s, offset+4) # FIXME
                elif property_type in (VT_BSTR, VT_LPSTR):
                    # CodePageString, see https://msdn.microsoft.com/en-us/library/dd942354.aspx
                    # size is a 32 bits integer, including the null terminator, and
                    # possibly trailing or embedded null chars
                    #TODO: if codepage is unicode, the string should be converted as such
                    count = i32(s, offset+4)
                    value = s[offset+8:offset+8+count-1]
                    # remove all null chars:
                    value = value.replace(b'\x00', b'')
                elif property_type == VT_BLOB:
                    # binary large object (BLOB)
                    # see https://msdn.microsoft.com/en-us/library/dd942282.aspx
                    count = i32(s, offset+4)
                    value = s[offset+8:offset+8+count]
                elif property_type == VT_LPWSTR:
                    # UnicodeString
                    # see https://msdn.microsoft.com/en-us/library/dd942313.aspx
                    # "the string should NOT contain embedded or additional trailing
                    # null characters."
                    count = i32(s, offset+4)
                    value = self._decode_utf16_str(s[offset+8:offset+8+count*2])
                elif property_type == VT_FILETIME:
                    value = long(i32(s, offset+4)) + (long(i32(s, offset+8))<<32)
                    # FILETIME is a 64-bit int: "number of 100ns periods
                    # since Jan 1,1601".
                    if convert_time and property_id not in no_conversion:
                        log.debug('Converting property #%d to python datetime, value=%d=%fs'
                                %(property_id, value, float(value)/10000000))
                        # convert FILETIME to Python datetime.datetime
                        # inspired from https://code.activestate.com/recipes/511425-filetime-to-datetime/
                        _FILETIME_null_date = datetime.datetime(1601, 1, 1, 0, 0, 0)
                        log.debug('timedelta days=%d' % (value//(10*1000000*3600*24)))
                        value = _FILETIME_null_date + datetime.timedelta(microseconds=value//10)
                    else:
                        # legacy code kept for backward compatibility: returns a
                        # number of seconds since Jan 1,1601
                        value = value // 10000000 # seconds
                elif property_type == VT_UI1: # 1-byte unsigned integer
                    value = i8(s[offset+4])
                elif property_type == VT_CLSID:
                    value = _clsid(s[offset+4:offset+20])
                elif property_type == VT_CF:
                    # PropertyIdentifier or ClipboardData??
                    # see https://msdn.microsoft.com/en-us/library/dd941945.aspx
                    count = i32(s, offset+4)
                    value = s[offset+8:offset+8+count]
                elif property_type == VT_BOOL:
                    # VARIANT_BOOL, 16 bits bool, 0x0000=Fals, 0xFFFF=True
                    # see https://msdn.microsoft.com/en-us/library/cc237864.aspx
                    value = bool(i16(s, offset+4))
                else:
                    value = None # everything else yields "None"
                    log.debug('property id=%d: type=%d not implemented in parser yet' % (property_id, property_type))

# missing: VT_EMPTY, VT_NULL, VT_R4, VT_R8, VT_CY, VT_DATE,
                # VT_DECIMAL, VT_I1, VT_I8, VT_UI8,
                # see https://msdn.microsoft.com/en-us/library/dd942033.aspx

# FIXME: add support for VT_VECTOR
                # VT_VECTOR is a 32 uint giving the number of items, followed by
                # the items in sequence. The VT_VECTOR value is combined with the
                # type of items, e.g. VT_VECTOR|VT_BSTR
                # see https://msdn.microsoft.com/en-us/library/dd942011.aspx

#print("%08x" % property_id, repr(value), end=" ")
                #print("(%s)" % VT[i32(s, offset) & 0xFFF])

data[property_id] = value
            except BaseException as exc:
                # catch exception while parsing each property, and only raise
                # a DEFECT_INCORRECT, because parsing can go on
                msg = 'Error while parsing property id %d in stream %s: %s' % (
                    property_id, repr(streampath), exc)
                self._raise_defect(DEFECT_INCORRECT, msg, type(exc))

return data

def get_metadata(self):
        """
        Parse standard properties streams, return an OleMetadata object
        containing all the available metadata.
        (also stored in the metadata attribute of the OleFileIO object)

new in version 0.25
        """
        self.metadata = OleMetadata()
        self.metadata.parse_properties(self)
        return self.metadata

#
# --------------------------------------------------------------------
# This script can be used to dump the directory of any OLE2 structured
# storage file.

def main():
    """
    Main function when olefile is runs as a script from the command line.
    This will open an OLE2 file and display its structure and properties
    :return: nothing
    """
    import sys, optparse

DEFAULT_LOG_LEVEL = "warning" # Default log level
    LOG_LEVELS = {
        'debug':    logging.DEBUG,
        'info':     logging.INFO,
        'warning':  logging.WARNING,
        'error':    logging.ERROR,
        'critical': logging.CRITICAL
        }

usage = 'usage: %prog [options] <filename> [filename2 ...]'
    parser = optparse.OptionParser(usage=usage)
    parser.add_option("-c", action="store_true", dest="check_streams",
        help='check all streams (for debugging purposes)')
    parser.add_option("-d", action="store_true", dest="debug_mode",
        help='debug mode, shortcut for -l debug (displays a lot of debug information, for developers only)')
    parser.add_option('-l', '--loglevel', dest="loglevel", action="store", default=DEFAULT_LOG_LEVEL,
                            help="logging level debug/info/warning/error/critical (default=%default)")

(options, args) = parser.parse_args()

print('olefile version %s %s - https://www.decalage.info/en/olefile\n' % (__version__, __date__))

# Print help if no arguments are passed
    if len(args) == 0:
        print(__doc__)
        parser.print_help()
        sys.exit()

if options.debug_mode:
        options.loglevel = 'debug'

# setup logging to the console
    logging.basicConfig(level=LOG_LEVELS[options.loglevel], format='%(levelname)-8s %(message)s')

# also enable the module's logger:
    enable_logging()

for filename in args:
        try:
            ole = OleFileIO(filename)#, raise_defects=DEFECT_INCORRECT)
            print("-" * 68)
            print(filename)
            print("-" * 68)
            ole.dumpdirectory()
            for streamname in ole.listdir():
                if streamname[-1][0] == "\005":
                    print("%r: properties" % streamname)
                    try:
                        props = ole.getproperties(streamname, convert_time=True)
                        props = sorted(props.items())
                        for k, v in props:
                            #[PL]: avoid to display too large or binary values:
                            if isinstance(v, (basestring, bytes)):
                                if len(v) > 50:
                                    v = v[:50]
                            if isinstance(v, bytes):
                                # quick and dirty binary check:
                                for c in (1,2,3,4,5,6,7,11,12,14,15,16,17,18,19,20,
                                    21,22,23,24,25,26,27,28,29,30,31):
                                    if c in bytearray(v):
                                        v = '(binary data)'
                                        break
                            print("   ", k, v)
                    except:
                        log.exception('Error while parsing property stream %r' % streamname)

if options.check_streams:
                # Read all streams to check if there are errors:
                print('\nChecking streams...')
                for streamname in ole.listdir():
                    # print name using repr() to convert binary chars to \xNN:
                    print('-', repr('/'.join(streamname)),'-', end=' ')
                    st_type = ole.get_type(streamname)
                    if st_type == STGTY_STREAM:
                        print('size %d' % ole.get_size(streamname))
                        # just try to read stream in memory:
                        ole.openstream(streamname)
                    else:
                        print('NOT a stream : type=%d' % st_type)
                print()

##            for streamname in ole.listdir():
##                # print name using repr() to convert binary chars to \xNN:
##                print('-', repr('/'.join(streamname)),'-', end=' ')
##                print(ole.getmtime(streamname))
##            print()

print('Modification/Creation times of all directory entries:')
            for entry in ole.direntries:
                if entry is not None:
                    print('- %s: mtime=%s ctime=%s' % (entry.name,
                        entry.getmtime(), entry.getctime()))
            print()

# parse and display metadata:
            try:
                meta = ole.get_metadata()
                meta.dump()
            except:
                log.exception('Error while parsing metadata')
            print()
            #[PL] Test a few new methods:
            root = ole.get_rootentry_name()
            print('Root entry name: "%s"' % root)
            if ole.exists('worddocument'):
                print("This is a Word document.")
                print("type of stream 'WordDocument':", ole.get_type('worddocument'))
                print("size :", ole.get_size('worddocument'))
                if ole.exists('macros/vba'):
                    print("This document may contain VBA macros.")

# print parsing issues:
            print('\nNon-fatal issues raised during parsing:')
            if ole.parsing_issues:
                for exctype, msg in ole.parsing_issues:
                    print('- %s: %s' % (exctype.__name__, msg))
            else:
                print('None')
        except:
            log.exception('Error while parsing file %r' % filename)

if __name__ == "__main__":
    main()

# this code was developed while listening to The Wedding Present "Sea Monsters"

${this.title}

Code Editor : olefile.py