Gecko [ www.utparral.edu.mx ]

Name	Size	Permission
__pycache__	[ DIR ]	drwxr-xr-x
tests	[ DIR ]	drwxr-xr-x
asyncio.py	7.44 KB	-rw-r--r--
blocking.py	11.69 KB	-rw-r--r--
common.py	2.63 KB	-rw-r--r--
__init__.py	33 B	-rw-r--r--
threading.py	9.17 KB	-rw-r--r--
tornado.py	6.7 KB	-rw-r--r--
trio.py	14.5 KB	-rw-r--r--

Code Editor : trio.py

import array
from contextlib import contextmanager
import errno
from itertools import count
import logging
from typing import Optional

try:
    from contextlib import asynccontextmanager  # Python 3.7
except ImportError:
    from async_generator import asynccontextmanager  # Backport for Python 3.6

from outcome import Value, Error
import trio
from trio.abc import Channel

from jeepney.auth import Authenticator, BEGIN
from jeepney.bus import get_bus
from jeepney.fds import FileDescriptor, fds_buf_size
from jeepney.low_level import Parser, MessageType, Message
from jeepney.wrappers import ProxyBase, unwrap_msg
from jeepney.bus_messages import message_bus
from .common import (
    MessageFilters, FilterHandle, ReplyMatcher, RouterClosed, check_replyable,
)

log = logging.getLogger(__name__)

__all__ = [
    'open_dbus_connection',
    'open_dbus_router',
    'Proxy',
]

# The function below is copied from trio, which is under the MIT license:

# Permission is hereby granted, free of charge, to any person obtaining
# a copy of this software and associated documentation files (the
# "Software"), to deal in the Software without restriction, including
# without limitation the rights to use, copy, modify, merge, publish,
# distribute, sublicense, and/or sell copies of the Software, and to
# permit persons to whom the Software is furnished to do so, subject to
# the following conditions:
#
# The above copyright notice and this permission notice shall be
# included in all copies or substantial portions of the Software.
@contextmanager
def _translate_socket_errors_to_stream_errors():
    try:
        yield
    except OSError as exc:
        if exc.errno in {errno.EBADF, errno.ENOTSOCK}:
            # EBADF on Unix, ENOTSOCK on Windows
            raise trio.ClosedResourceError("this socket was already closed") from None
        else:
            raise trio.BrokenResourceError(
                "socket connection broken: {}".format(exc)
            ) from exc

class DBusConnection(Channel):
    """A plain D-Bus connection with no matching of replies.

This doesn't run any separate tasks: sending and receiving are done in
    the task that calls those methods. It's suitable for implementing servers:
    several worker tasks can receive requests and send replies.
    For a typical client pattern, see :class:`DBusRouter`.

Implements trio's channel interface for Message objects.
    """
    def __init__(self, socket, enable_fds=False):
        self.socket = socket
        self.enable_fds = enable_fds
        self.parser = Parser()
        self.outgoing_serial = count(start=1)
        self.unique_name = None
        self.send_lock = trio.Lock()
        self.recv_lock = trio.Lock()
        self._leftover_to_send = None  # type: Optional[memoryview]

async def send(self, message: Message, *, serial=None):
        """Serialise and send a :class:`~.Message` object"""
        async with self.send_lock:
            if serial is None:
                serial = next(self.outgoing_serial)
            fds = array.array('i') if self.enable_fds else None
            data = message.serialise(serial, fds=fds)
            await self._send_data(data, fds)

# _send_data is copied & modified from trio's SocketStream.send_all() .
    # See above for the MIT license.
    async def _send_data(self, data: bytes, fds):
        if self.socket.did_shutdown_SHUT_WR:
            raise trio.ClosedResourceError("can't send data after sending EOF")

with _translate_socket_errors_to_stream_errors():
            if self._leftover_to_send:
                # A previous message was partly sent - finish sending it now.
                await self._send_remainder(self._leftover_to_send)

with memoryview(data) as data:
                if fds:
                    sent = await self.socket.sendmsg([data], [(
                        trio.socket.SOL_SOCKET, trio.socket.SCM_RIGHTS, fds
                    )])
                else:
                    sent = await self.socket.send(data)

await self._send_remainder(data, sent)

async def _send_remainder(self, data: memoryview, already_sent=0):
        try:
            while already_sent < len(data):
                with data[already_sent:] as remaining:
                    sent = await self.socket.send(remaining)
                already_sent += sent
            self._leftover_to_send = None
        except trio.Cancelled:
            # Sending cancelled mid-message. Keep track of the remaining data
            # so it can be sent before the next message, otherwise the next
            # message won't be recognised.
            self._leftover_to_send = data[already_sent:]
            raise

async def receive(self) -> Message:
        """Return the next available message from the connection"""
        async with self.recv_lock:
            while True:
                msg = self.parser.get_next_message()
                if msg is not None:
                    return msg

# Once data is read, it must be given to the parser with no
                # checkpoints (where the task could be cancelled).
                b, fds = await self._read_data()
                if not b:
                    raise trio.EndOfChannel("Socket closed at the other end")
                self.parser.add_data(b, fds)

async def _read_data(self):
        if self.enable_fds:
            nbytes = self.parser.bytes_desired()
            with _translate_socket_errors_to_stream_errors():
                data, ancdata, flags, _ = await self.socket.recvmsg(
                    nbytes, fds_buf_size()
                )
            if flags & getattr(trio.socket, 'MSG_CTRUNC', 0):
                self._close()
                raise RuntimeError("Unable to receive all file descriptors")
            return data, FileDescriptor.from_ancdata(ancdata)

else:  # not self.enable_fds
            with _translate_socket_errors_to_stream_errors():
                data = await self.socket.recv(4096)
            return data, []

def _close(self):
        self.socket.close()
        self._leftover_to_send = None

# Our closing is currently sync, but AsyncResource objects must have aclose
    async def aclose(self):
        """Close the D-Bus connection"""
        self._close()

@asynccontextmanager
    async def router(self):
        """Temporarily wrap this connection as a :class:`DBusRouter`

To be used like::

async with conn.router() as req:
                reply = await req.send_and_get_reply(msg)

While the router is running, you shouldn't use :meth:`receive`.
        Once the router is closed, you can use the plain connection again.
        """
        async with trio.open_nursery() as nursery:
            router = DBusRouter(self)
            await router.start(nursery)
            try:
                yield router
            finally:
                await router.aclose()

async def open_dbus_connection(bus='SESSION', *, enable_fds=False) -> DBusConnection:
    """Open a plain D-Bus connection

:return: :class:`DBusConnection`
    """
    bus_addr = get_bus(bus)
    sock : trio.SocketStream = await trio.open_unix_socket(bus_addr)

# Authentication
    authr = Authenticator(enable_fds=enable_fds)
    for req_data in authr:
        await sock.send_all(req_data)
        authr.feed(await sock.receive_some())
    await sock.send_all(BEGIN)

conn = DBusConnection(sock.socket, enable_fds=enable_fds)

# Say *Hello* to the message bus - this must be the first message, and the
    # reply gives us our unique name.
    async with conn.router() as router:
        reply = await router.send_and_get_reply(message_bus.Hello())
        conn.unique_name = reply.body[0]

return conn

class TrioFilterHandle(FilterHandle):
    def __init__(self, filters: MessageFilters, rule, send_chn, recv_chn):
        super().__init__(filters, rule, recv_chn)
        self.send_channel = send_chn

@property
    def receive_channel(self):
        return self.queue

async def aclose(self):
        self.close()
        await self.send_channel.aclose()

async def __aenter__(self):
        return self.queue

async def __aexit__(self, exc_type, exc_val, exc_tb):
        await self.aclose()

class Future:
    """A very simple Future for trio based on `trio.Event`."""
    def __init__(self):
        self._outcome = None
        self._event = trio.Event()

def set_result(self, result):
        self._outcome = Value(result)
        self._event.set()

def set_exception(self, exc):
        self._outcome = Error(exc)
        self._event.set()

async def get(self):
        await self._event.wait()
        return self._outcome.unwrap()

class DBusRouter:
    """A client D-Bus connection which can wait for replies.

This runs a separate receiver task and dispatches received messages.
    """
    _nursery_mgr = None
    _rcv_cancel_scope = None

def __init__(self, conn: DBusConnection):
        self._conn = conn
        self._replies = ReplyMatcher()
        self._filters = MessageFilters()

@property
    def unique_name(self):
        return self._conn.unique_name

async def send(self, message, *, serial=None):
        """Send a message, don't wait for a reply
        """
        await self._conn.send(message, serial=serial)

async def send_and_get_reply(self, message) -> Message:
        """Send a method call message and wait for the reply

Returns the reply message (method return or error message type).
        """
        check_replyable(message)
        if self._rcv_cancel_scope is None:
            raise RouterClosed("This DBusRouter has stopped")

serial = next(self._conn.outgoing_serial)

with self._replies.catch(serial, Future()) as reply_fut:
            await self.send(message, serial=serial)
            return (await reply_fut.get())

def filter(self, rule, *, channel: Optional[trio.MemorySendChannel]=None, bufsize=1):
        """Create a filter for incoming messages

Usage::

async with router.filter(rule) as receive_channel:
                matching_msg = await receive_channel.receive()

# OR:
            send_chan, recv_chan = trio.open_memory_channel(1)
            async with router.filter(rule, channel=send_chan):
                matching_msg = await recv_chan.receive()

If the channel fills up,
        The sending end of the channel is closed when leaving the ``async with``
        block, whether or not it was passed in.

:param jeepney.MatchRule rule: Catch messages matching this rule
        :param trio.MemorySendChannel channel: Send matching messages here
        :param int bufsize: If no channel is passed in, create one with this size
        """
        if channel is None:
            channel, recv_channel = trio.open_memory_channel(bufsize)
        else:
            recv_channel = None
        return TrioFilterHandle(self._filters, rule, channel, recv_channel)

# Task management -------------------------------------------

async def start(self, nursery: trio.Nursery):
        if self._rcv_cancel_scope is not None:
            raise RuntimeError("DBusRouter receiver task is already running")
        self._rcv_cancel_scope = await nursery.start(self._receiver)

async def aclose(self):
        """Stop the sender & receiver tasks"""
        # It doesn't matter if we receive a partial message - the connection
        # should ensure that whatever is received is fed to the parser.
        if self._rcv_cancel_scope is not None:
            self._rcv_cancel_scope.cancel()
            self._rcv_cancel_scope = None

# Ensure trio checkpoint
        await trio.sleep(0)

# Code to run in receiver task ------------------------------------

def _dispatch(self, msg: Message):
        """Handle one received message"""
        if self._replies.dispatch(msg):
            return

for filter in self._filters.matches(msg):
            try:
                filter.send_channel.send_nowait(msg)
            except trio.WouldBlock:
                pass

async def _receiver(self, task_status=trio.TASK_STATUS_IGNORED):
        """Receiver loop - runs in a separate task"""
        with trio.CancelScope() as cscope:
            self.is_running = True
            task_status.started(cscope)
            try:
                while True:
                    msg = await self._conn.receive()
                    self._dispatch(msg)
            finally:
                self.is_running = False
                # Send errors to any tasks still waiting for a message.
                self._replies.drop_all()

# Closing a memory channel can't block, but it only has an
                # async close method, so we need to shield it from cancellation.
                with trio.move_on_after(3) as cleanup_scope:
                    for filter in self._filters.filters.values():
                        cleanup_scope.shield = True
                        await filter.send_channel.aclose()

class Proxy(ProxyBase):
    """A trio proxy for calling D-Bus methods

You can call methods on the proxy object, such as ``await bus_proxy.Hello()``
    to make a method call over D-Bus and wait for a reply. It will either
    return a tuple of returned data, or raise :exc:`.DBusErrorResponse`.
    The methods available are defined by the message generator you wrap.

:param msggen: A message generator object.
    :param ~trio.DBusRouter router: Router to send and receive messages.
    """
    def __init__(self, msggen, router):
        super().__init__(msggen)
        if not isinstance(router, DBusRouter):
            raise TypeError("Proxy can only be used with DBusRequester")
        self._router = router

def _method_call(self, make_msg):
        async def inner(*args, **kwargs):
            msg = make_msg(*args, **kwargs)
            assert msg.header.message_type is MessageType.method_call
            reply = await self._router.send_and_get_reply(msg)
            return unwrap_msg(reply)

return inner

@asynccontextmanager
async def open_dbus_router(bus='SESSION', *, enable_fds=False):
    """Open a D-Bus 'router' to send and receive messages.

Use as an async context manager::

async with open_dbus_router() as req:
            ...

:param str bus: 'SESSION' or 'SYSTEM' or a supported address.
    :return: :class:`DBusRouter`

This is a shortcut for::

conn = await open_dbus_connection()
        async with conn:
            async with conn.router() as req:
                ...
    """
    conn = await open_dbus_connection(bus, enable_fds=enable_fds)
    async with conn:
        async with conn.router() as rtr:
            yield rtr

${this.title}

Code Editor : trio.py