Gecko [ www.utparral.edu.mx ]

Name	Size	Permission
perl5004delta.pod	54.92 KB	-rw-r--r--
perl5005delta.pod	33.48 KB	-rw-r--r--
perl5100delta.pod	54.23 KB	-rw-r--r--
perl5101delta.pod	42.86 KB	-rw-r--r--
perl5120delta.pod	87.18 KB	-rw-r--r--
perl5121delta.pod	9.76 KB	-rw-r--r--
perl5122delta.pod	9.35 KB	-rw-r--r--
perl5123delta.pod	4 KB	-rw-r--r--
perl5124delta.pod	3.59 KB	-rw-r--r--
perl5125delta.pod	7.5 KB	-rw-r--r--
perl5140delta.pod	140.92 KB	-rw-r--r--
perl5141delta.pod	7.78 KB	-rw-r--r--
perl5142delta.pod	6.73 KB	-rw-r--r--
perl5143delta.pod	7.58 KB	-rw-r--r--
perl5144delta.pod	6.18 KB	-rw-r--r--
perl5160delta.pod	130.51 KB	-rw-r--r--
perl5161delta.pod	6 KB	-rw-r--r--
perl5162delta.pod	3.51 KB	-rw-r--r--
perl5163delta.pod	3.99 KB	-rw-r--r--
perl5180delta.pod	116.63 KB	-rw-r--r--
perl5181delta.pod	6.44 KB	-rw-r--r--
perl5182delta.pod	5.21 KB	-rw-r--r--
perl5184delta.pod	4.51 KB	-rw-r--r--
perl5200delta.pod	112.83 KB	-rw-r--r--
perl5201delta.pod	10.51 KB	-rw-r--r--
perl5202delta.pod	11.98 KB	-rw-r--r--
perl5203delta.pod	9.02 KB	-rw-r--r--
perl5220delta.pod	126.64 KB	-rw-r--r--
perl5221delta.pod	10.31 KB	-rw-r--r--
perl5222delta.pod	12.03 KB	-rw-r--r--
perl5223delta.pod	8.24 KB	-rw-r--r--
perl5224delta.pod	4.35 KB	-rw-r--r--
perl5240delta.pod	63.01 KB	-rw-r--r--
perl5241delta.pod	8.01 KB	-rw-r--r--
perl5242delta.pod	4.01 KB	-rw-r--r--
perl5243delta.pod	10.67 KB	-rw-r--r--
perl5244delta.pod	4.35 KB	-rw-r--r--
perl5260delta.pod	97.84 KB	-rw-r--r--
perl5261delta.pod	7.54 KB	-rw-r--r--
perl5262delta.pod	7.52 KB	-rw-r--r--
perl5263delta.pod	6.85 KB	-rw-r--r--
perl5280delta.pod	69.46 KB	-rw-r--r--
perl5281delta.pod	4.49 KB	-rw-r--r--
perl5282delta.pod	6.01 KB	-rw-r--r--
perl5283delta.pod	4.99 KB	-rw-r--r--
perl5300delta.pod	39.75 KB	-rw-r--r--
perl5301delta.pod	5.6 KB	-rw-r--r--
perl5302delta.pod	4.57 KB	-rw-r--r--
perl5303delta.pod	4.86 KB	-rw-r--r--
perl5320delta.pod	52.77 KB	-rw-r--r--
perl5321delta.pod	6.84 KB	-rw-r--r--
perl5340delta.pod	36.49 KB	-rw-r--r--
perl5341delta.pod	3.93 KB	-rw-r--r--
perl561delta.pod	121.79 KB	-rw-r--r--
perl56delta.pod	104.69 KB	-rw-r--r--
perl581delta.pod	37.17 KB	-rw-r--r--
perl582delta.pod	4.37 KB	-rw-r--r--
perl583delta.pod	6.19 KB	-rw-r--r--
perl584delta.pod	7.19 KB	-rw-r--r--
perl585delta.pod	5.75 KB	-rw-r--r--
perl586delta.pod	4.54 KB	-rw-r--r--
perl587delta.pod	8.16 KB	-rw-r--r--
perl588delta.pod	24.69 KB	-rw-r--r--
perl589delta.pod	52.64 KB	-rw-r--r--
perl58delta.pod	112.47 KB	-rw-r--r--
perlaix.pod	19.96 KB	-rw-r--r--
perlamiga.pod	5.61 KB	-rw-r--r--
perlandroid.pod	8.03 KB	-rw-r--r--
perlapio.pod	20.86 KB	-rw-r--r--
perlapi.pod	725.32 KB	-rw-r--r--
perlartistic.pod	6.85 KB	-rw-r--r--
perlbook.pod	8.19 KB	-rw-r--r--
perlboot.pod	294 B	-rw-r--r--
perlbot.pod	304 B	-rw-r--r--
perlbs2000.pod	7.81 KB	-rw-r--r--
perlcall.pod	55.61 KB	-rw-r--r--
perlcheat.pod	4.38 KB	-rw-r--r--
perlclib.pod	9.32 KB	-rw-r--r--
perlcn.pod	4.71 KB	-rw-r--r--
perlcommunity.pod	6.9 KB	-rw-r--r--
perlcygwin.pod	26.48 KB	-rw-r--r--
perldata.pod	48.83 KB	-rw-r--r--
perldbmfilter.pod	4.86 KB	-rw-r--r--
perldebguts.pod	41.4 KB	-rw-r--r--
perldebtut.pod	21.65 KB	-rw-r--r--
perldebug.pod	38.63 KB	-rw-r--r--
perldelta.pod	3.93 KB	-rw-r--r--
perldeprecation.pod	20.34 KB	-rw-r--r--
perldiag.pod	291.39 KB	-rw-r--r--
perldoc.pod	9.16 KB	-rw-r--r--
perldocstyle.pod	45.23 KB	-rw-r--r--
perldos.pod	10.28 KB	-rw-r--r--
perldsc.pod	25.32 KB	-rw-r--r--
perldtrace.pod	7.77 KB	-rw-r--r--
perlebcdic.pod	82.37 KB	-rw-r--r--
perlembed.pod	36.69 KB	-rw-r--r--
perlexperiment.pod	8.56 KB	-rw-r--r--
perlfaq1.pod	14.09 KB	-rw-r--r--
perlfaq2.pod	9.16 KB	-rw-r--r--
perlfaq3.pod	36.72 KB	-rw-r--r--
perlfaq4.pod	88.69 KB	-rw-r--r--
perlfaq5.pod	54.21 KB	-rw-r--r--
perlfaq6.pod	38.61 KB	-rw-r--r--
perlfaq7.pod	36.93 KB	-rw-r--r--
perlfaq8.pod	48.77 KB	-rw-r--r--
perlfaq9.pod	14.86 KB	-rw-r--r--
perlfaq.pod	22.26 KB	-rw-r--r--
perlfilter.pod	21.8 KB	-rw-r--r--
perlfork.pod	13.04 KB	-rw-r--r--
perlform.pod	16.22 KB	-rw-r--r--
perlfreebsd.pod	1.58 KB	-rw-r--r--
perlfunc.pod	397.05 KB	-rw-r--r--
perlgit.pod	30.59 KB	-rw-r--r--
perlglossary.pod	134.02 KB	-rw-r--r--
perlgov.pod	14.16 KB	-rw-r--r--
perlgpl.pod	13.49 KB	-rw-r--r--
perlguts.pod	165.67 KB	-rw-r--r--
perlhack.pod	43.25 KB	-rw-r--r--
perlhacktips.pod	56.05 KB	-rw-r--r--
perlhacktut.pod	6.01 KB	-rw-r--r--
perlhaiku.pod	1.47 KB	-rw-r--r--
perlhist.pod	55.91 KB	-rw-r--r--
perlhpux.pod	29.89 KB	-rw-r--r--
perlhurd.pod	1.95 KB	-rw-r--r--
perlintern.pod	93.09 KB	-rw-r--r--
perlinterp.pod	33.25 KB	-rw-r--r--
perlintro.pod	21.62 KB	-rw-r--r--
perliol.pod	34.71 KB	-rw-r--r--
perlipc.pod	69.85 KB	-rw-r--r--
perlirix.pod	4.31 KB	-rw-r--r--
perljp.pod	8.23 KB	-rw-r--r--
perlko.pod	11.92 KB	-rw-r--r--
perllexwarn.pod	355 B	-rw-r--r--
perllinux.pod	1.96 KB	-rw-r--r--
perllocale.pod	72.38 KB	-rw-r--r--
perllol.pod	9.21 KB	-rw-r--r--
perlmacos.pod	998 B	-rw-r--r--
perlmacosx.pod	11.84 KB	-rw-r--r--
perlmodinstall.pod	9.87 KB	-rw-r--r--
perlmodlib.pod	74.92 KB	-rw-r--r--
perlmod.pod	25.58 KB	-rw-r--r--
perlmodstyle.pod	22.05 KB	-rw-r--r--
perlmroapi.pod	3.32 KB	-rw-r--r--
perlnetware.pod	6.49 KB	-rw-r--r--
perlnewmod.pod	10.78 KB	-rw-r--r--
perlnumber.pod	8.16 KB	-rw-r--r--
perlobj.pod	34.88 KB	-rw-r--r--
perlootut.pod	26.13 KB	-rw-r--r--
perlopenbsd.pod	1.2 KB	-rw-r--r--
perlopentut.pod	14.87 KB	-rw-r--r--
perlop.pod	146.18 KB	-rw-r--r--
perlos2.pod	91.16 KB	-rw-r--r--
perlos390.pod	16.14 KB	-rw-r--r--
perlos400.pod	4.65 KB	-rw-r--r--
perlpacktut.pod	50.17 KB	-rw-r--r--
perlperf.pod	48.71 KB	-rw-r--r--
perlplan9.pod	5 KB	-rw-r--r--
perl.pod	16.39 KB	-rw-r--r--
perlpod.pod	22.54 KB	-rw-r--r--
perlpodspec.pod	67.02 KB	-rw-r--r--
perlpodstyle.pod	11.81 KB	-rw-r--r--
perlpolicy.pod	25.93 KB	-rw-r--r--
perlport.pod	86.91 KB	-rw-r--r--
perlpragma.pod	5.05 KB	-rw-r--r--
perlqnx.pod	6.52 KB	-rw-r--r--
perlreapi.pod	29.49 KB	-rw-r--r--
perlrebackslash.pod	32.39 KB	-rw-r--r--
perlrecharclass.pod	48.65 KB	-rw-r--r--
perlref.pod	34.6 KB	-rw-r--r--
perlreftut.pod	18.38 KB	-rw-r--r--
perlreguts.pod	38.42 KB	-rw-r--r--
perlre.pod	128.25 KB	-rw-r--r--
perlrepository.pod	509 B	-rw-r--r--
perlrequick.pod	18.74 KB	-rw-r--r--
perlreref.pod	15.22 KB	-rw-r--r--
perlretut.pod	120.42 KB	-rw-r--r--
perlriscos.pod	1.49 KB	-rw-r--r--
perlrun.pod	54.65 KB	-rw-r--r--
perlsec.pod	26.96 KB	-rw-r--r--
perlsecpolicy.pod	18.86 KB	-rw-r--r--
perlsolaris.pod	29.14 KB	-rw-r--r--
perlsource.pod	6.96 KB	-rw-r--r--
perlstyle.pod	8.53 KB	-rw-r--r--
perlsub.pod	72.71 KB	-rw-r--r--
perlsynology.pod	7.77 KB	-rw-r--r--
perlsyn.pod	47.17 KB	-rw-r--r--
perlthrtut.pod	45.43 KB	-rw-r--r--
perltie.pod	38.66 KB	-rw-r--r--
perltoc.pod	708.53 KB	-rw-r--r--
perltodo.pod	372 B	-rw-r--r--
perltooc.pod	294 B	-rw-r--r--
perltoot.pod	294 B	-rw-r--r--
perltrap.pod	10.37 KB	-rw-r--r--
perltru64.pod	8.29 KB	-rw-r--r--
perltw.pod	4.36 KB	-rw-r--r--
perlunicode.pod	89.21 KB	-rw-r--r--
perlunicook.pod	25.06 KB	-rw-r--r--
perlunifaq.pod	13.79 KB	-rw-r--r--
perluniintro.pod	37.74 KB	-rw-r--r--
perluniprops.pod	431.26 KB	-rw-r--r--
perlunitut.pod	7.76 KB	-rw-r--r--
perlutil.pod	7.22 KB	-rw-r--r--
perlvar.pod	80.17 KB	-rw-r--r--
perlvms.pod	49.63 KB	-rw-r--r--
perlvos.pod	3.75 KB	-rw-r--r--
perlwin32.pod	38.12 KB	-rw-r--r--
perlxs.pod	83.01 KB	-rw-r--r--
perlxstut.pod	49.25 KB	-rw-r--r--
perlxstypemap.pod	23.44 KB	-rw-r--r--

Code Editor : perl5340delta.pod

=encoding utf8

=head1 NAME

perl5340delta - what is new for perl v5.34.0

=head1 DESCRIPTION

This document describes differences between the 5.32.0 release and the 5.34.0
release.

If you are upgrading from an earlier release such as 5.30.0, first read
L<perl5320delta>, which describes differences between 5.30.0 and 5.32.0.

=head1 Core Enhancements

=head2 Experimental Try/Catch Syntax

An initial experimental attempt at providing C<try>/C<catch> notation has
been added.

use feature 'try';

try {
        a_function();
    }
    catch ($e) {
        warn "An error occurred: $e";
    }

For more information, see L<perlsyn/"Try Catch Exception Handling">.

=head2 C<qr/{,n}/> is now accepted

An empty lower bound is now accepted for regular expression quantifiers,
like C<{,3}>.

=head2 Blanks freely allowed within but adjacent to curly braces

(in double-quotish contexts and regular expression patterns)

This means you can write things like S<C<\x{ FFFC }>> if you like.  This
applies to all such constructs, namely C<\b{}>, C<\g{}>, C<\k{}>,
C<\N{}>, C<\o{}>, and C<\x{}>; as well as the regular expression
quantifier C<{I<m>,I<n>}>.  C<\p{}> and C<\P{}> retain their
already-existing, even looser, rules mandated by the Unicode standard
(see L<perluniprops/Properties accessible through \p{} and \P{}>).

This ability is in effect regardless of the presence of the C</x>
regular expression pattern modifier.

Additionally, the comma in a regular expression braced quantifier may
have blanks (tabs or spaces) before and/or after the comma, like
S<C<qr/a{ 5, 7 }/>>.

=head2 New octal syntax C<0oI<ddddd>>

It is now possible to specify octal literals with C<0o> prefixes,
as in C<0o123_456>, parallel to the existing construct to specify
hexadecimal literal C<0xI<ddddd>> and binary literal C<0bI<ddddd>>.
Also, the builtin C<oct()> function now accepts this new syntax.

See L<perldata/Scalar value constructors> and L<perlfunc/oct EXPR>.

=head1 Performance Enhancements

=over 4

=item *

Fix a memory leak in RegEx
[L<GH #18604|https://github.com/Perl/perl5/issues/18604>]

=back

=head1 Modules and Pragmata

=head2 New Modules and Pragmata

=over 4

=item *

L<ExtUtils::PL2Bat> 0.004 has been added to the Perl core.

This module is a generalization of the C<pl2bat> script. It being a script has
led to at least two forks of this code; this module will unify them under one
implementation with tests.

=back

=head2 Updated Modules and Pragmata

=over 4

=item *

L<Archive::Tar> has been upgraded from version 2.36 to 2.38.

=item *

L<autodie> has been upgraded from version 2.32 to 2.34.

=item *

L<B> has been upgraded from version 1.80 to 1.82.

=item *

L<B::Deparse> has been upgraded from version 1.54 to 1.56.

=item *

L<bytes> has been upgraded from version 1.07 to 1.08.

=item *

L<Carp> has been upgraded from version 1.50 to 1.52.

=item *

L<Compress::Raw::Bzip2> has been upgraded from version 2.093 to 2.101.

=item *

L<Compress::Raw::Zlib> has been upgraded from version 2.093 to 2.101.

=item *

L<Config::Perl::V> has been upgraded from version 0.32 to 0.33.

=item *

L<CPAN> has been upgraded from version 2.27 to 2.28.

=item *

L<Data::Dumper> has been upgraded from version 2.174 to 2.179.

=item *

L<DB> has been upgraded from version 1.58 to 1.59.

=item *

L<DB_File> has been upgraded from version 1.853 to 1.855.

=item *

L<Devel::Peek> has been upgraded from version 1.28 to 1.30.

=item *

L<Devel::PPPort> has been upgraded from version 3.57 to 3.62.

New C<PERL_VERSION_*> comparison macros are now available.

C<ppport.h --api-info> no longer includes non-API info unless that is the only
match

=item *

L<Digest> has been upgraded from version 1.17_01 to 1.19.

=item *

L<Digest::MD5> has been upgraded from version 2.55_01 to 2.58.

=item *

L<DynaLoader> has been upgraded from version 1.47 to 1.50.

=item *

L<Encode> has been upgraded from version 3.06 to 3.08.

=item *

L<Env> has been upgraded from version 1.04 to 1.05.

=item *

L<Errno> has been upgraded from version 1.30 to 1.33.

=item *

L<experimental> has been upgraded from version 0.020 to 0.024.

=item *

L<Exporter> has been upgraded from version 5.74 to 5.76.

=item *

L<ExtUtils::CBuilder> has been upgraded from version 0.280234 to 0.280236.

=item *

L<ExtUtils::Install> has been upgraded from version 2.14 to 2.20.

=item *

L<ExtUtils::MakeMaker> has been upgraded from version 7.44 to 7.62.

=item *

L<ExtUtils::Manifest> has been upgraded from version 1.72 to 1.73.

=item *

L<ExtUtils::Miniperl> has been upgraded from version 1.09 to 1.10.

=item *

L<ExtUtils::ParseXS> has been upgraded from version 3.40 to 3.43.

=item *

L<ExtUtils::Typemaps> has been upgraded from version 3.38 to 3.43.

=item *

L<Fcntl> has been upgraded from version 1.13 to 1.14.

=item *

L<feature> has been upgraded from version 1.58 to 1.64.

Added the default enabled C<bareword_filehandles> feature.

A new L<multidimensional|feature/"The 'multidimensional' feature">
feature has been added, which is enabled by
default but allows turning off L<multi-dimensional array
emulation|perldata/Multi-dimensional array emulation>.

=item *

L<File::Copy> has been upgraded from version 2.34 to 2.35.

=item *

L<File::Fetch> has been upgraded from version 0.56 to 1.00.

=item *

L<File::Find> has been upgraded from version 1.37 to 1.39.

=item *

L<File::Path> has been upgraded from version 2.16 to 2.18.

=item *

L<File::Spec> has been upgraded from version 3.78 to 3.80.

=item *

L<File::Temp> has been upgraded from version 0.2309 to 0.2311.

=item *

L<Filter::Util::Call> has been upgraded from version 1.59 to 1.60.

=item *

L<FindBin> has been upgraded from version 1.51 to 1.52.

=item *

L<GDBM_File> has been upgraded from version 1.18 to 1.19.

New functions and compatibility for newer versions of GDBM.
[L<GH #18435|https://github.com/Perl/perl5/pull/18435>]

=item *

L<Getopt::Long> has been upgraded from version 2.51 to 2.52.

=item *

L<Getopt::Std> has been upgraded from version 1.12 to 1.13.

=item *

L<Hash::Util> has been upgraded from version 0.23 to 0.25.

=item *

L<Hash::Util::FieldHash> has been upgraded from version 1.20 to 1.21.

=item *

L<I18N::LangTags> has been upgraded from version 0.44 to 0.45.

=item *

L<if> has been upgraded from version 0.0608 to 0.0609.

=item *

L<IO> has been upgraded from version 1.43 to 1.46.

IO::Socket now stores error messages in C<$IO::Socket::errstr>, in
addition to in C<$@>.

The C<error> method now reports the error state for both the input and
output streams for sockets and character devices.  Similarly
C<clearerr> now clears the error state for both streams.

A spurious error reported for regular file handles has been
fixed in L<IO::Handle>.
[L<GH #18019|https://github.com/Perl/perl5/issues/18019>]

=item *

IO-Compress has been upgraded from version 2.093 to 2.102.

bin/zipdetails version 2.02

=item *

L<IO::Socket::IP> has been upgraded from version 0.39 to 0.41.

=item *

L<IO::Zlib> has been upgraded from version 1.10 to 1.11.

=item *

L<IPC::SysV> has been upgraded from version 2.07 to 2.09.

=item *

L<JSON::PP> has been upgraded from version 4.04 to 4.06.

=item *

The libnet distribution has been upgraded from version 3.11 to 3.13.

=item *

L<locale> has been upgraded from version 1.09 to 1.10.

=item *

L<Math::Complex> has been upgraded from version 1.5901 to 1.5902.

=item *

L<MIME::Base64> has been upgraded from version 3.15 to 3.16.

=item *

L<Module::CoreList> has been upgraded from version 5.20200620 to 5.20210520.

=item *

L<Module::Load> has been upgraded from version 0.34 to 0.36.

=item *

L<Module::Load::Conditional> has been upgraded from version 0.70 to 0.74.

=item *

L<mro> has been upgraded from version 1.23 to 1.25_001.

=item *

L<Net::Ping> has been upgraded from version 2.72 to 2.74.

=item *

L<NEXT> has been upgraded from version 0.67_01 to 0.68.

=item *

L<ODBM_File> has been upgraded from version 1.16 to 1.17.

=item *

L<Opcode> has been upgraded from version 1.47 to 1.50.

=item *

L<overload> has been upgraded from version 1.31 to 1.33.

=item *

L<perlfaq> has been upgraded from version 5.20200523 to 5.20210411.

=item *

L<PerlIO::encoding> has been upgraded from version 0.28 to 0.30.

=item *

L<PerlIO::mmap> has been upgraded from version 0.016 to 0.017.

=item *

L<PerlIO::scalar> has been upgraded from version 0.30 to 0.31.

=item *

L<PerlIO::via::QuotedPrint> has been upgraded from version 0.08 to 0.09.

=item *

L<Pod::Checker> has been upgraded from version 1.73 to 1.74.

=item *

L<Pod::Html> has been upgraded from version 1.25 to 1.27.

=item *

L<Pod::Simple> has been upgraded from version 3.40 to 3.42.

=item *

L<Pod::Usage> has been upgraded from version 1.69 to 2.01.

=item *

L<POSIX> has been upgraded from version 1.94 to 1.97.

POSIX::signbit() behaviour has been improved.
[L<GH #18441|https://github.com/Perl/perl5/pull/18441>]

Documentation for C<asctime> clarifies that the result is always in English.
(Use C<strftime> for a localized result.)

=item *

L<re> has been upgraded from version 0.40 to 0.41.

(See under L</Internal Changes> for more information.)

=item *

L<Safe> has been upgraded from version 2.41 to 2.43.

=item *

L<Socket> has been upgraded from version 2.029 to 2.031.

=item *

L<Storable> has been upgraded from version 3.21 to 3.23.

=item *

L<strict> has been upgraded from version 1.11 to 1.12.

=item *

L<subs> has been upgraded from version 1.03 to 1.04.

=item *

L<Symbol> has been upgraded from version 1.08 to 1.09.

=item *

L<Test::Harness> has been upgraded from version 3.42 to 3.43.

=item *

L<Test::Simple> has been upgraded from version 1.302175 to 1.302183.

=item *

L<Text::Balanced> has been upgraded from version 2.03 to 2.04.

=item *

L<threads> has been upgraded from version 2.25 to 2.26.

=item *

L<threads::shared> has been upgraded from version 1.61 to 1.62.

=item *

L<Tie::RefHash> has been upgraded from version 1.39 to 1.40.

=item *

L<Time::HiRes> has been upgraded from version 1.9764 to 1.9767.

=item *

L<Time::Local> has been upgraded from version 1.28 to 1.30.

=item *

L<Unicode::Collate> has been upgraded from version 1.27 to 1.29.

=item *

L<Unicode::Normalize> has been upgraded from version 1.27 to 1.28.

=item *

L<utf8> has been upgraded from version 1.22 to 1.24.

=item *

L<version> has been upgraded from version 0.9924 to 0.9928.

=item *

L<warnings> has been upgraded from version 1.47 to 1.51.

=item *

L<Win32> has been upgraded from version 0.53 to 0.57.

Fix calling convention for C<PFNRegGetValueA>.

Added C<Win32::IsSymlinkCreationAllowed()>,
C<Win32::IsDeveloperModeEnabled()>, and C<Win32::GetProcessPrivileges()>.

Removed old code for versions before Windows 2000.

=item *

L<XS::APItest> has been upgraded from version 1.09 to 1.16.

=item *

L<XS::Typemap> has been upgraded from version 0.17 to 0.18.

=back

=head1 Documentation

=head2 New Documentation

=head3 L<perldocstyle>

This document is a guide for the authorship and maintenance of the
documentation that ships with Perl.

=head3 L<perlgov>

This document describes the goals, scope, system, and rules for Perl's new
governance model.

Other pod files, most notably L<perlpolicy>, were amended to reflect
its adoption.

=head2 Changes to Existing Documentation

We have attempted to update the documentation to reflect the changes
listed in this document.  If you find any we have missed, open an issue
at L<https://github.com/Perl/perl5/issues>.

Additionally, the following selected changes have been made:

=over 4

=item *

L<perlapi>, L<perlguts>, L<perlxs>, and L<perlxstut> now prefer C<SvPVbyte>
over C<SvPV>.

=item *

References to B<Pumpking> have been replaced with a more accurate term or
B<Steering Council> where appropriate.

=item *

B<The Perl Steering Council> is now the fallback contact for security issues.

=back

=head3 L<perlapi>

=over 4

=item *

Efforts continue in improving the presentation of this document, and to
document more API elements.

=back

=head3 L<perlcommunity>

=over 4

=item *

The freenode IRC URL has been updated.

=back

=head3 L<perldebguts>

=over 4

=item *

Corrected the description of the scalar C<< ${"_<$filename"} >>
variables.

=back

=head3 L<perldiag>

=over 4

=item *

Now documents additional examples of "not imported" warnings.

=back

=head3 L<perlfaq>

=over 4

=item *

The Perl FAQ was updated to CPAN version 5.20201107 with minor
improvements.

=back

=head3 L<perlfunc>

=over 4

=item *

L<my()|perlfunc/my> and L<state()|perlfunc/state> now explicitly warn
the reader that lexical variables should typically not be redeclared
within the same scope or statement.
[L<GH #18389|https://github.com/Perl/perl5/issues/18389>]

=item *

The L<localtime|perlfunc/localtime> entry has been improved and now
also states that the result of the function is always in English.

=item *

L<msgsnd()|perlfunc/msgsnd> documented a length field included in the
packed C<MSG> parameter to C<msgsnd()>, but there was no such field.
C<MSG> contains only the type and the message content.

=item *

Better explanation of what happens when C<sleep> is called with a zero or
negative value.

=item *

Simplify the C<split()> documentation by removing the C<join()>s from the
examples
[L<GH #18676|https://github.com/Perl/perl5/issues/18676>]

=back

=head3 L<perlgit>

=over 4

=item *

document how to create a remote-tracking branch for every PR

=item *

document how to get a PR as a local branch

=back

=head3 L<perlguts>

=over 4

=item *

L<perlguts> now explains in greater detail the need to consult C<SvUTF8>
when calling C<SvPV> (or variants). A new "How do I pass a Perl string to a C
library?" section in the same document discusses when to use which style of
macro to read an SV's string value.

=item *

Corrected C<my_rpeep> example in perlguts.

=item *

A section has been added on the formatted printing of special sizes.

=back

=head3 L<perlop>

=over 4

=item *

The C<< <> >> and C<<< <<>> >>> operators are commonly referred to as
the diamond and double diamond operators respectively, but that wasn't
mentioned previously in their documentation.

=item *

Document range op behavior change.

=back

=head3 L<perlpacktut>

=over 4

=item *

Incorrect variables used in an example have been fixed.

=back

=head3 L<perlsyn>

=over 4

=item *

Document that caller() does not see try{} blocks

=item *

A new example shows how a lexical C<my> variable can be declared
during the initialization of a C<for> loop.

=back

=head3 L<perlunifaq>

=over 4

=item *

Fix description of what Perl does with unencoded strings

=back

=head1 Diagnostics

The following additions or changes have been made to diagnostic output,
including warnings and fatal error messages.  For the complete list of
diagnostic messages, see L<perldiag>.

=head2 New Diagnostics

=head3 New Errors

=over 4

=item *

L<Bareword filehandle "%s" not allowed under 'no feature "bareword_filehandles"'|perldiag/"Bareword filehandle "%s" not allowed under 'no feature "bareword_filehandles"'">

This accompanies the new
L<bareword_filehandles|feature/"The 'bareword_filehandles' feature."> feature.

=item *

L<Multidimensional hash lookup is disabled|perldiag/"Multidimensional hash lookup is disabled">

This accompanies the new
L<multidimensional|feature/"The 'multidimensional' feature"> feature.

=back

=head3 New Warnings

=over 4

=item *

L<Wide character in setenv key (encoding to utf8)|perldiag/"Wide character in %s">

Attempts to put wide characters into environment variable keys via C<%ENV> now
provoke this warning.

=back

=head2 Changes to Existing Diagnostics

=over 4

=item *

L<Error %s in expansion of %s|perldiag/"Error %s in expansion of %s">

An error was encountered in handling a user-defined property
(L<perlunicode/User-Defined Character Properties>).  These are
programmer written subroutines, hence subject to errors that may
prevent them from compiling or running.

=item *

L<Infinite recursion in user-defined property|perldiag/"Infinite recursion in user-defined property">

A user-defined property (L<perlunicode/User-Defined Character Properties>)
can depend on the definitions of other user-defined
properties.  If the chain of dependencies leads back to this property,
infinite recursion would occur, were it not for the check that raised
this error.

=item *

L<Timeout waiting for another thread to define \p{%s}|perldiag/"Timeout waiting for another thread to define \p{%s}">

The first time a user-defined property
(L<perlunicode/User-Defined Character Properties>) is used, its
definition is looked up and converted into an internal form for more
efficient handling in subsequent uses.  There could be a race if two or
more threads tried to do this processing nearly simultaneously.

=item *

L<Unknown user-defined property name \p{%s}|perldiag/"Unknown user-defined property name \p{%s}">

You specified to use a property within the C<\p{...}> which was a
syntactically valid user-defined property, but no definition was found
for it

=item *

L<Too few arguments for subroutine '%s' (got %d; expected %d)|perldiag/"Too few arguments for subroutine '%s' (got %d; expected %d)">

Subroutine argument-count mismatch errors now include the number of
given and expected arguments.

=item *

L<Too many arguments for subroutine '%s' (got %d; expected %d)|perldiag/"Too many arguments for subroutine '%s' (got %d; expected %d)">

Subroutine argument-count mismatch errors now include the number of
given and expected arguments.

=item *

L<Lost precision when %s %f by 1|perldiag/"Lost precision when %s %f by 1">

This warning was only issued for positive too-large values when
incrementing, and only for negative ones when decrementing.
It is now issued for both positive or negative too-large values.
[L<GH #18333|https://github.com/Perl/perl5/issues/18333>]

=item *

L<\K not permitted in lookahead/lookbehind in regex; marked by <-- HERE in mE<sol>%sE<sol>|perldiag/"\K not permitted in lookahead/lookbehind in regex; marked by <-- HERE in m/%s/">

This error was incorrectly produced in some cases involving nested
lookarounds.  This has been fixed.
[L<GH #18123|https://github.com/Perl/perl5/issues/18123>]

=item *

L<Use of uninitialized value%s|perldiag/"Use of uninitialized value%s">

This warning may now include the array or hash index when the
uninitialized value is the result of an element not found.  This will
only happen if the index is a simple non-magical variable.

=back

=head1 Utility Changes

=head2 L<perl5db.pl> (the debugger)

=over 4

=item * New option: C<HistItemMinLength>

This option controls the minimum length a command must be to get stored in
history.  Traditionally, this has been fixed at 2.  Changes to the debugger
are often perilous, and new bugs should be reported so the debugger can be
debugged.

=item * Fix to C<i> and C<l> commands

The C<i $var> and C<l $var> commands work again with lexical variables.

=back

=head1 Configuration and Compilation

=over 4

=item *

Prevented incpath to spill into libpth

=item *

Use realpath if available. (This might catch more duplicate paths.)

=item *

Only include real existing paths.

=item *

Filter inc paths out of libpth.

=item * stadtx hash support has been removed

stadtx support has been entirely removed.  Previously, it could be requested
with C<PERL_HASH_FUNC_STADTX>, and was default in 64-bit builds.  It has been
replaced with SipHash.  SipHash has been more rigorously reviewed than stadtx.

=item * Configure

A new probe checks for buggy libc implementations of the C<gcvt>/C<qgcvt>
functions.
[L<GH #18170|https://github.com/Perl/perl5/issues/18170>]

=item * C<-Dusedefaultstrict>

Perl can now be built with L<strict> on by default (using the configuration
option C<-Dusedefaultstrict>.

These strict defaults do not apply when C<perl> is run via C<-e> or C<-E>.

This setting provides a diagnostic mechanism intended for development
purposes only and is thus undefined by default.

=item *

The minimum supported Bison version is now 2.4, and the maximum is 3.7.

=item *

Newer 64-bit versions of the Intel C/C++ compiler are now recognised
and have the correct flags set.

=item *

We now trap SIGBUS when F<Configure> checks for C<va_copy>.

On several systems the attempt to determine if we need C<va_copy> or similar
results in a SIGBUS instead of the expected SIGSEGV, which previously caused a
core dump.

[L<GH #18148|https://github.com/Perl/perl5/issues/18148>]

=back

=head1 Testing

Tests were added and changed to reflect the other additions and
changes in this release.  Furthermore, these significant changes were
made:

=over 4

=item *

Split Config-dependent tests in F<t/opbasic/arith.t> to F<t/op/arith2.t>

=item *

F<t/re/opt.t> was added, providing a test harness for regexp optimization.
[L<GH #18213|https://github.com/Perl/perl5/pull/18213>]

=item *

A workaround for CPAN distributions needing dot in C<@INC> has been removed
[L<GH #18394|https://github.com/Perl/perl5/pull/18394>].
All distributions that previously required the workaround have now been
adapted.

=item *

When testing in parallel on many-core platforms, you can now cause the
test suite to finish somewhat earlier, but with less logical ordering of
the tests, by setting

PERL_TEST_HARNESS_ASAP=1

while running the test suite.

=back

=head1 Platform Support

=head2 New Platforms

=over 4

=item 9front

Allow building Perl on i386 9front systems (a fork of plan9).

=back

=head2 Updated Platforms

=over 4

=item Plan9

Improve support for Plan9 on i386 platforms.

=item MacOS (Darwin)

The hints file for darwin has been updated to handle future MacOS versions
beyond 10. [L<GH #17946|https://github.com/Perl/perl5/issues/17946>]

=back

=head2 Discontinued Platforms

=over 4

=item Symbian

Support code relating to Symbian has been removed.  Symbian was an
operating system for mobile devices.  The port was last updated in July
2009, and the platform itself in October 2012.

=back

=head2 Platform-Specific Notes

=over 4

=item DragonFlyBSD

Tests were updated to workaround DragonFlyBSD bugs in L<tc*()
functions|https://bugs.dragonflybsd.org/issues/3252> and L<ctime
updates|https://bugs.dragonflybsd.org/issues/3251>.

=item Mac OS X

A number of system libraries no longer exist as actual files on Big Sur,
even though C<dlopen> will pretend they do, so now we fall back to C<dlopen>
if a library file can not be found.
[L<GH #18407|https://github.com/Perl/perl5/issues/18407>]

=item Windows

Reading non-ASCII characters from the console when its codepage was set to
65001 (UTF-8) was broken due to a bug in Windows. A workaround for this
problem has been implemented.
[L<GH #18701|https://github.com/Perl/perl5/issues/18701>]

Building with mingw.org compilers (version 3.4.5 or later) using mingw runtime
versions < 3.22 now works again.  This was broken in Perl 5.31.4.

Building with mingw.org compilers (version 3.4.5 or later) using mingw runtime
versions >= 3.21 now works (for compilers up to version 5.3.0).

F<Makefile.mk>, and thus support for dmake, has been removed. It is still
possible to build Perl on Windows using nmake (Makefile) and GNU make
(GNUmakefile).
[L<GH #18511|https://github.com/Perl/perl5/pull/18511>]

perl can now be built with C<USE_QUADMATH> on MS Windows using
(32-bit and 64-bit) mingw-w64 ports of gcc.
[L<GH #18465|https://github.com/Perl/perl5/pull/18465>]

The F<pl2bat.pl> utility now needs to C<use ExtUtils::PL2Bat>. This could
cause failures in parallel builds.

Unlike POSIX systems, creating a symbolic link on Windows requires
either elevated privileges or Windows 10 1703 or later with Developer
Mode enabled.

stat(), including C<stat FILEHANDLE>, and lstat() now uses our own
implementation that populates the device C<dev> and inode numbers
C<ino> returned rather than always returning zero.  The number of
links C<nlink> field is now always populated.

L<< C<${^WIN32_SLOPPY_STAT}> |perlvar/${^WIN32_SLOPPY_STAT} >> previously
controlled whether the C<nlink> field was populated requiring a
separate Windows API call to fetch, since C<nlink> and the other
information required for C<stat()> is now retrieved in a single API call.

The C<-r> and C<-w> operators now return true for the C<STDIN>,
C<STDOUT> and C<STDERR> handles.  Unfortunately it still won't return
true for duplicates of those handles.
[L<GH #8502|https://github.com/Perl/perl5/issues/8502>].

The times returned by stat() and lstat() are no longer incorrect
across Daylight Savings Time adjustments.
[L<GH #6080|https://github.com/Perl/perl5/issues/6080>].

C<-x> on a filehandle should now match C<-x> on the corresponding
filename on Vista or later.
[L<GH #4145|https://github.com/Perl/perl5/issues/4145>].

C<-e '"'> no longer incorrectly returns true.
[L<GH #12431|https://github.com/Perl/perl5/issues/12431>].

The same manifest is now used for Visual C++ and gcc builds.

Previously, MSVC builds were using the B</manifestdependency> flag instead of
embedding F<perlexe.manifest>, which caused issues such as C<GetVersionEx()>
returning the wrong version number on Windows 10.

=item z/OS

The locale categories C<LC_SYNTAX> and C<LC_TOD> are now recognized.
Perl doesn't do anything with these, except it now allows you to specify
them.  They are included in C<LC_ALL>.

=back

=head1 Internal Changes

=over 4

=item *

Corrected handling of double and long double parameters for perl's
implementation of formatted output for C<-Dusequadmath> builds.

This applies to C<PerlIO_printf()>, C<croak()>, C<warn()>, C<sv_catpvf()> and
their variants.

Previously in C<quadmath> builds, code like:

PerlIO_printf(PerlIO_stderr(), "%g", somedouble);

PerlIO_printf(PerlIO_stderr(), "%Lg", somelongdouble);

would erroneously throw an exception "panic: quadmath invalid format
...", since the code added for quadmath builds assumed C<NV>s were the
only floating point format passed into these functions.

This code would also process the standard C long double specifier C<L>
as if it expected an C<NV> (C<__float128> for quadmath builds),
resulting in undefined behaviour.

These functions now correctly accept doubles, long doubles and NVs.

=item *

Previously the right operand of bitwise shift operators (shift amount)
was implicitly cast from IV to int, but it might lead wrong results
if IV does not fit in int.

And also, shifting INT_MIN bits used to yield the shiftee unchanged
(treated as 0-bit shift instead of negative shift).

=item *

A set of C<cop_hints_exists_{pv,pvn,pvs,sv}> functions was added,
to support checking for the existence of keys in the hints hash of a
specific cop without needing to create a mortal copy of said value.

=item *

An aid has been added for using the C<DEBUG> macros when debugging XS or
C code. The comments in F<perl.h> describe C<DEBUG_PRE_STMTS> and
C<DEBUG_POST_STMTS>. which you can C<#define> to do things like save and
restore C<errno>, in case the C<DEBUG> calls are interfering with that,
or to display timestamps, or which thread it's coming from, or the
location of the call, or whatever.  You can make a quick hack to help
you track something down without having to edit individual C<DEBUG>
calls.

=item *

Make C<REFCOUNTED_HE_EXISTS> available outside of core

=item *

All C<SvTRUE>-ish functions now evaluate their arguments exactly once.
In 5.32, plain L<perlapi/C<SvTRUE>> was changed to do that; now the rest
do as well.

=item *

Unicode is now a first class citizen when considering the pattern /A*B/ where
A and B are arbitrary.  The pattern matching code tries to make a tight loop
to match the span of A's.  The logic of this was now really updated with
support for UTF-8.

=item *

The L<re> module has a new function C<optimization>, which can return a
hashref of optimization data discovered about a compiled regexp.

=item *

The C<PERL_GLOBAL_STRUCT> compilation option has been removed, and
with it the need or the C<dVAR> macro.  C<dVAR> remains defined as a
no-op outside C<PERL_CORE> for backwards compatiblity with XS modules.

=item *

A new savestack type C<SAVEt_HINTS_HH> has been added, which neatens the
previous behaviour of C<SAVEt_HINTS>.  On previous versions the types and
values pushed to the save stack would depend on whether the hints included the
C<HINT_LOCALIZE_HH> bit, which complicates external code that inspects the
save stack. The new version uses a different savestack type to indicate the
difference.

=item *

A new API function L<perlapi/av_count> has been added which gives a
clearly named way to find how many elements are in an array.

=back

=head1 Selected Bug Fixes

=over 4

=item *

Setting C<%ENV> now properly handles upgraded strings in the key. Previously
Perl sent the SV's internal PV directly to the OS; now it will handle keys
as it has handled values since 5.18: attempt to downgrade the string first;
if that fails then warn and use the utf8 form.

=item *

Fix a memory leak in regcomp.c
[L<GH #18604|https://github.com/Perl/perl5/issues/18604>]

=item * pack/unpack format 'D' now works on all systems that could support it

Previously if C<NV == long double>, now it is supported on all platforms that
have long doubles. In particular that means it is now also supported on
quadmath platforms.

=item *

Skip trying to constant fold an incomplete op tree
[L<GH #18380|https://github.com/Perl/perl5/issues/18380>]

Constant folding of chained comparison op trees could fail under certain
conditions, causing perl to crash. As a quick fix, constant folding is
now skipped for such op trees. This also addresses
[L<GH #17917|https://github.com/Perl/perl5/issues/17917>].

=item *

C<%g> formatting broken on Ubuntu-18.04, C<NVSIZE == 8>
[L<GH #18170|https://github.com/Perl/perl5/issues/18170>]

Buggy libc implementations of the C<gcvt> and C<qgcvt> functions
caused C<(s)printf> to incorrectly truncate C<%g> formatted numbers.
A new Configure probe now checks for this, with the result that the libc
C<sprintf> will be used in place of C<gcvt> and C<qgcvt>.

Tests added as part of this fix also revealed related problems in
some Windows builds. The makefiles for MINGW builds on Windows have
thus been adjusted to use C<USE_MINGW_ANSI_STDIO> by default, ensuring
that they also provide correct C<(s)printf> formatting of numbers.

=item *

F<op.c>: croak on C<my $_> when C<use utf8> is in effect
[L<GH #18449|https://github.com/Perl/perl5/issues/18449>]

The lexical topic feature experiment was removed in Perl v5.24 and
declaring C<my $_> became a compile time error. However, it was previously
still possible to make this declaration if C<use utf8> was in effect.

=item *

F<regexec.c>: Fix assertion failure
[L<GH #18451|https://github.com/Perl/perl5/issues/18451>]

Fuzzing triggered an assertion failure in the regexp engine when too many
characters were copied into a buffer.

=item *

L<semctl()|perlfunc/semctl>, L<msgctl()|perlfunc/msgctl>, and
L<shmctl()|perlfunc/shmctl> now properly reset the UTF-8 flag on the
C<ARG> parameter if it's modified for C<IPC_STAT> or C<GETALL>
operations.

=item *

C<semctl()>, C<msgctl()>, and C<shmctl()> now attempt to downgrade the C<ARG>
parameter if its value is being used as input to C<IPC_SET> or
C<SETALL> calls.  A failed downgrade will thrown an exception.

=item *

In cases where C<semctl()>, C<msgctl()> or C<shmctl()> would treat the C<ARG>
parameter as a pointer, an undefined value no longer generates a
warning.  In most such calls the pointer isn't used anyway and this
allows you to supply C<undef> for a value not used by the underlying
function.

=item *

L<semop()|perlfunc/semop> now downgrades the C<OPSTRING> parameter,
L<msgsnd()|perlfunc/msgsnd> now downgrades the C<MSG> parameter and
L<shmwrite|perlfunc/shmwrite> now downgrades the C<STRING> parameter
to treat them as bytes.  Previously they would be left upgraded,
providing a corrupted structure to the underlying function call.

=item *

L<msgrcv()|perlfunc/msgrcv> now properly resets the UTF-8 flag the
C<VAR> parameter when it is modified.  Previously the UTF-8 flag could
be left on, resulting in a possibly corrupt result in C<VAR>.

=item *

Magic is now called correctly for stacked file test operators.
[L<GH #18293|https://github.com/Perl/perl5/issues/18293>]

=item *

The C<@ary = split(...)> optimization no longer switches in the target
array as the value stack.
[L<GH #18232|https://github.com/Perl/perl5/issues/18232>]
Also see discussion at
L<https://github.com/Perl/perl5/pull/18014#issuecomment-671299506>.

=item *

Fixed a bug in which some regexps with recursive subpatterns matched
incorrectly.

[L<GH #18096|https://github.com/Perl/perl5/issues/18096>]

=item *

On Win32, C<waitpid(-1, WNOHANG)> could sometimes have a very large
timeout.  [L<GH #16529|https://github.com/Perl/perl5/issues/16529>]

=item *

C<MARK> and hence C<items> are now correctly initialized in C<BOOT> XSUBs.

=item *

Some list assignments involving C<undef> on the left-hand side were
over-optimized and produced incorrect results.
[L<GH #16685|https://github.com/Perl/perl5/issues/16685>],
[L<GH #17816|https://github.com/Perl/perl5/issues/17816>]

=back

=head1 Known Problems

None

=head1 Errata From Previous Releases

None

=head1 Obituary

Kent Fredric (KENTNL) passed away in February 2021.  A native of New Zealand
and a self-described "huge geek," Kent was the author or maintainer of 178
CPAN distributions, the Perl maintainer for the Gentoo Linux distribution and
a contributor to the Perl core distribution.  He is mourned by his family,
friends and open source software communities worldwide.

=head1 Acknowledgements

Perl 5.34.0 represents approximately 11 months of development since Perl
5.32.0 and contains approximately 280,000 lines of changes across 2,100
files from 78 authors.

Excluding auto-generated files, documentation and release tools, there were
approximately 150,000 lines of changes to 1,300 .pm, .t, .c and .h files.

Perl continues to flourish into its fourth decade thanks to a vibrant
community of users and developers. The following people are known to have
contributed the improvements that became Perl 5.34.0:

Aaron Crane, Adam Hartley, Andy Dougherty, Ben Cornett, Branislav
Zahradník, brian d foy, Chris 'BinGOs' Williams, Christian Walde
(Mithaldu), Craig A. Berry, Dagfinn Ilmari Mannsåker, Dan Book, Daniel
Böhmer, Daniel Laügt, Dan Kogai, David Cantrell, David Mitchell, Dominic
Hamon, E. Choroba, Ed J, Eric Herman, Eric Lindblad, Eugene Alvin Villar,
Felipe Gasper, Giovanni Tataranni, Graham Knop, Graham Ollis, Hauke D,
H.Merijn Brand, Hugo van der Sanden, Ichinose Shogo, Ivan Baidakou, Jae
Bradley, James E Keenan, Jason McIntosh, jkahrman, John Karr, John Lightsey,
Kang-min Liu, Karen Etheridge, Karl Williamson, Keith Thompson, Leon
Timmermans, Marc Reisner, Marcus Holland-Moritz, Max Maischein, Michael G
Schwern, Nicholas Clark, Nicolas R., Paul Evans, Petr Písař, raiph, Renee
Baecker, Ricardo Signes, Richard Leach, Romano, Ryan Voots, Samanta Navarro,
Samuel Thibault, Sawyer X, Scott Baker, Sergey Poznyakoff, Sevan Janiyan,
Shirakata Kentaro, Shlomi Fish, Sisyphus, Sizhe Zhao, Steve Hay, TAKAI
Kousuke, Thibault Duponchelle, Todd Rinaldo, Tomasz Konojacki, Tom Hukins,
Tom Stellard, Tony Cook, vividsnow, Yves Orton, Zakariyya Mughal,
Михаил Козачков.

The list above is almost certainly incomplete as it is automatically
generated from version control history. In particular, it does not include
the names of the (very much appreciated) contributors who reported issues to
the Perl bug tracker.

Many of the changes included in this version originated in the CPAN modules
included in Perl's core. We're grateful to the entire CPAN community for
helping Perl to flourish.

For a more complete list of all of Perl's historical contributors, please
see the F<AUTHORS> file in the Perl source distribution.

=head1 Reporting Bugs

If you find what you think is a bug, you might check the perl bug database
at L<https://github.com/Perl/perl5/issues>.  There may also be information at
L<http://www.perl.org/>, the Perl Home Page.

If you believe you have an unreported bug, please open an issue at
L<https://github.com/Perl/perl5/issues>.  Be sure to trim your bug down to a
tiny but sufficient test case.

If the bug you are reporting has security implications which make it
inappropriate to send to a public issue tracker, then see
L<perlsec/SECURITY VULNERABILITY CONTACT INFORMATION>
for details of how to report the issue.

=head1 Give Thanks

If you wish to thank the Perl 5 Porters for the work we had done in Perl 5,
you can do so by running the C<perlthanks> program:

perlthanks

This will send an email to the Perl 5 Porters list with your show of thanks.

=head1 SEE ALSO

The F<Changes> file for an explanation of how to view exhaustive details on
what changed.

The F<INSTALL> file for how to build Perl.

The F<README> file for general stuff.

The F<Artistic> and F<Copying> files for copyright information.

=cut

${this.title}

Code Editor : perl5340delta.pod