Gecko [ www.utparral.edu.mx ]

Name	Size	Permission
ab	51.43 KB	-rwxr-xr-x
annotate	10.2 KB	-rwxr-xr-x
apachectl	3.33 KB	-rwxr-xr-x
apr-1-config	6.84 KB	-rwxr-xr-x
apreq2-config	5.96 KB	-rwxr-xr-x
apu-1-config	6.42 KB	-rwxr-xr-x
apxs	23.3 KB	-rwxr-xr-x
aria_chk	4.56 MB	-rwxr-xr-x
aria_dump_log	4.35 MB	-rwxr-xr-x
aria_ftdump	4.37 MB	-rwxr-xr-x
aria_pack	4.4 MB	-rwxr-xr-x
aria_read_log	4.51 MB	-rwxr-xr-x
autopoint	25.97 KB	-rwxr-xr-x
bdftogd	3.91 KB	-rwxr-xr-x
bison	288.55 KB	-rwxr-xr-x
bmp2tiff	14.32 KB	-rwxr-xr-x
bsqldb	26.76 KB	-rwxr-xr-x
bunzip2	85.55 KB	-rwxr-xr-x
bzcat	85.55 KB	-rwxr-xr-x
bzcmp	2.08 KB	-rwxr-xr-x
bzdiff	2.08 KB	-rwxr-xr-x
bzegrep	1.64 KB	-rwxr-xr-x
bzfgrep	1.64 KB	-rwxr-xr-x
bzgrep	1.64 KB	-rwxr-xr-x
bzip2	85.55 KB	-rwxr-xr-x
bzip2recover	14.23 KB	-rwxr-xr-x
bzless	1.23 KB	-rwxr-xr-x
bzmore	1.23 KB	-rwxr-xr-x
captoinfo	66.7 KB	-rwxr-xr-x
checkgid	6.13 KB	-rwxr-xr-x
cjpeg	30.29 KB	-rwxr-xr-x
clear	6.12 KB	-rwxr-xr-x
corelist	15.03 KB	-rwxr-xr-x
cpan	8.18 KB	-rwxr-xr-x
crc32	715 B	-r-xr-xr-x
c_rehash	6.57 KB	-rwxr-xr-x
curl	174.83 KB	-rwxr-xr-x
curl-config	5.48 KB	-rwxr-xr-x
cwebp	50.9 KB	-rwxr-xr-x
datacopy	22.45 KB	-rwxr-xr-x
dbilogstrip	1.44 KB	-r-xr-xr-x
dbiprof	6.17 KB	-r-xr-xr-x
dbiproxy	5.37 KB	-r-xr-xr-x
dbl2png	14.3 KB	-rwxr-xr-x
dbmmanage	8.72 KB	-rwxr-xr-x
defncopy	18.76 KB	-rwxr-xr-x
derb	23.09 KB	-rwxr-xr-x
djpeg	26.27 KB	-rwxr-xr-x
dwebp	30.49 KB	-rwxr-xr-x
enc2xs	40.79 KB	-rwxr-xr-x
encguess	3.02 KB	-rwxr-xr-x
envsubst	34.55 KB	-rwxr-xr-x
envvars	1.03 KB	-rw-r--r--
envvars-std	1.03 KB	-rw-r--r--
fax2ps	18.52 KB	-rwxr-xr-x
fax2tiff	14.66 KB	-rwxr-xr-x
fcgistarter	10.27 KB	-rwxr-xr-x
fisql	26.91 KB	-rwxr-xr-x
fix_rights	956 B	-rwxr-xr-x
flex	353.36 KB	-rwxr-xr-x
flex++	353.36 KB	-rwxr-xr-x
freebcp	18.59 KB	-rwxr-xr-x
freetype-config	3.75 KB	-rwxr-xr-x
ftpasswd	33.94 KB	-rwxr-xr-x
ftpcount	15.67 KB	-rwxr-xr-x
ftpdctl	82.73 KB	-rwxr-xr-x
ftpmail	13.69 KB	-rwxr-xr-x
ftpquota	32.21 KB	-rwxr-xr-x
ftptop	23.52 KB	-rwxr-xr-x
ftpwho	47.84 KB	-rwxr-xr-x
gd2copypal	10.15 KB	-rwxr-xr-x
gd2togif	10.14 KB	-rwxr-xr-x
gd2topng	10.16 KB	-rwxr-xr-x
gdcmpgif	10.15 KB	-rwxr-xr-x
gdparttopng	10.16 KB	-rwxr-xr-x
gdtopng	10.14 KB	-rwxr-xr-x
genbrk	14.84 KB	-rwxr-xr-x
gencfu	10.74 KB	-rwxr-xr-x
gencnval	22.73 KB	-rwxr-xr-x
gendict	22.91 KB	-rwxr-xr-x
gen_php_doc.sh	240 B	-rwxr-xr-x
genrb	161.05 KB	-rwxr-xr-x
GET	14.34 KB	-r-xr-xr-x
gettext	34.53 KB	-rwxr-xr-x
gettextize	42.73 KB	-rwxr-xr-x
gettext.sh	4.52 KB	-rwxr-xr-x
gif2tiff	14.48 KB	-rwxr-xr-x
giftogd2	10.15 KB	-rwxr-xr-x
h2ph	28.55 KB	-rwxr-xr-x
h2xs	59.52 KB	-rwxr-xr-x
HEAD	14.34 KB	-r-xr-xr-x
htcacheclean	30.53 KB	-rwxr-xr-x
htdbm	18.47 KB	-rwxr-xr-x
htdigest	10.27 KB	-rwxr-xr-x
html_template_phplibtool	107 B	-rwxr-xr-x
htpasswd	18.41 KB	-rwxr-xr-x
httpd	696.97 KB	-rwxr-xr-x
httxt2dbm	10.23 KB	-rwxr-xr-x
iconv	26.38 KB	-rwxr-xr-x
icu-config	21.58 KB	-rwxr-xr-x
icuinfo	10.54 KB	-rwxr-xr-x
infocmp	58.65 KB	-rwxr-xr-x
infotocap	66.7 KB	-rwxr-xr-x
innochecksum	3.62 MB	-rwxr-xr-x
instmodsh	4.16 KB	-r-xr-xr-x
jpegtran	42.36 KB	-rwxr-xr-x
json_pp	4.89 KB	-rwxr-xr-x
ldapadd	67.11 KB	-rwxr-xr-x
ldapcompare	55 KB	-rwxr-xr-x
ldapdelete	59.09 KB	-rwxr-xr-x
ldapexop	55.06 KB	-rwxr-xr-x
ldapmodify	67.11 KB	-rwxr-xr-x
ldapmodrdn	55 KB	-rwxr-xr-x
ldappasswd	55.03 KB	-rwxr-xr-x
ldapsearch	79.36 KB	-rwxr-xr-x
ldapurl	18.34 KB	-rwxr-xr-x
ldapwhoami	55.02 KB	-rwxr-xr-x
libmcrypt-config	1.43 KB	-rwxr-xr-x
libnetcfg	15.42 KB	-rwxr-xr-x
libpng16-config	2.27 KB	-rwxr-xr-x
libpng-config	2.27 KB	-rwxr-xr-x
listaction	170.55 KB	-rwxr-xr-x
listaction_d	170.54 KB	-rwxr-xr-x
listfdb	14.17 KB	-rwxr-xr-x
listjpeg	6.13 KB	-rwxr-xr-x
listmp3	10.54 KB	-rwxr-xr-x
listswf	174.55 KB	-rwxr-xr-x
listswf_d	174.54 KB	-rwxr-xr-x
logresolve	10.34 KB	-rwxr-xr-x
lwp-download	8.34 KB	-r-xr-xr-x
lwp-mirror	2.45 KB	-r-xr-xr-x
lwp-request	14.34 KB	-r-xr-xr-x
lwp-rget	14.78 KB	-r-xr-xr-x
makeconv	55.35 KB	-rwxr-xr-x
makefdb	70.41 KB	-rwxr-xr-x
makeswf	23.2 KB	-rwxr-xr-x
mariabackup	22.87 MB	-rwxr-xr-x
mariadb	4.28 MB	-rwxr-xr-x
mariadb-access	109.37 KB	-rwxr-xr-x
mariadb-admin	3.83 MB	-rwxr-xr-x
mariadb-backup	22.87 MB	-rwxr-xr-x
mariadb-binlog	4.05 MB	-rwxr-xr-x
mariadb-check	3.83 MB	-rwxr-xr-x
mariadb-client-test	4.38 MB	-rwxr-xr-x
mariadb_config	10.52 KB	-rwxr-xr-x
mariadb-convert-table-format	4.12 KB	-rwxr-xr-x
mariadbd-multi	26.76 KB	-rwxr-xr-x
mariadbd-safe	30.43 KB	-rwxr-xr-x
mariadbd-safe-helper	3.49 MB	-rwxr-xr-x
mariadb-dump	3.92 MB	-rwxr-xr-x
mariadb-dumpslow	8.05 KB	-rwxr-xr-x
mariadb-find-rows	3.21 KB	-rwxr-xr-x
mariadb-fix-extensions	1.22 KB	-rwxr-xr-x
mariadb-hotcopy	34.14 KB	-rwxr-xr-x
mariadb-import	3.82 MB	-rwxr-xr-x
mariadb-install-db	21.48 KB	-rwxr-xr-x
mariadb-ldb	4.05 MB	-rwxr-xr-x
mariadb-plugin	3.53 MB	-rwxr-xr-x
mariadb-secure-installation	13.38 KB	-rwxr-xr-x
mariadb-setpermission	17.13 KB	-rwxr-xr-x
mariadb-show	3.82 MB	-rwxr-xr-x
mariadb-slap	3.84 MB	-rwxr-xr-x
mariadb-test	4.21 MB	-rwxr-xr-x
mariadb-tzinfo-to-sql	3.53 MB	-rwxr-xr-x
mariadb-upgrade	3.62 MB	-rwxr-xr-x
mariadb-waitpid	3.52 MB	-rwxr-xr-x
mbstream	3.55 MB	-rwxr-xr-x
ming-config	561 B	-rwxr-xr-x
mp2bug	1.16 KB	-r-xr-xr-x
msgattrib	22.39 KB	-rwxr-xr-x
msgcat	18.38 KB	-rwxr-xr-x
msgcmp	22.49 KB	-rwxr-xr-x
msgcomm	18.37 KB	-rwxr-xr-x
msgconv	18.35 KB	-rwxr-xr-x
msgen	18.35 KB	-rwxr-xr-x
msgexec	14.38 KB	-rwxr-xr-x
msgfilter	26.45 KB	-rwxr-xr-x
msgfmt	79.41 KB	-rwxr-xr-x
msggrep	46.73 KB	-rwxr-xr-x
msginit	43.15 KB	-rwxr-xr-x
msgmerge	51.37 KB	-rwxr-xr-x
msgunfmt	30.57 KB	-rwxr-xr-x
msguniq	18.36 KB	-rwxr-xr-x
msql2mysql	1.42 KB	-rwxr-xr-x
myisamchk	4 MB	-rwxr-xr-x
myisam_ftdump	3.88 MB	-rwxr-xr-x
myisamlog	3.86 MB	-rwxr-xr-x
myisampack	3.91 MB	-rwxr-xr-x
my_print_defaults	3.53 MB	-rwxr-xr-x
myrocks_hotbackup	24.46 KB	-rwxr-xr-x
mysql	4.28 MB	-rwxr-xr-x
mysqlaccess	109.37 KB	-rwxr-xr-x
mysqladmin	3.83 MB	-rwxr-xr-x
mysqlbinlog	4.05 MB	-rwxr-xr-x
mysqlcheck	3.83 MB	-rwxr-xr-x
mysql_client_test	4.38 MB	-rwxr-xr-x
mysql_config	4.54 KB	-rwxr-xr-x
mysql_convert_table_format	4.12 KB	-rwxr-xr-x
mysqld_multi	26.76 KB	-rwxr-xr-x
mysqld_safe	30.43 KB	-rwxr-xr-x
mysqld_safe_helper	3.49 MB	-rwxr-xr-x
mysqldump	3.92 MB	-rwxr-xr-x
mysqldumpslow	8.05 KB	-rwxr-xr-x
mysql_find_rows	3.21 KB	-rwxr-xr-x
mysql_fix_extensions	1.22 KB	-rwxr-xr-x
mysqlhotcopy	34.14 KB	-rwxr-xr-x
mysqlimport	3.82 MB	-rwxr-xr-x
mysql_install_db	21.48 KB	-rwxr-xr-x
mysql_ldb	4.05 MB	-rwxr-xr-x
mysql_plugin	3.53 MB	-rwxr-xr-x
mysql_secure_installation	13.38 KB	-rwxr-xr-x
mysql.server	11.93 KB	-rwxr-xr-x
mysql_setpermission	17.13 KB	-rwxr-xr-x
mysqlshow	3.82 MB	-rwxr-xr-x
mysqlslap	3.84 MB	-rwxr-xr-x
mysqltest	4.21 MB	-rwxr-xr-x
mysql_tzinfo_to_sql	3.53 MB	-rwxr-xr-x
mysql_upgrade	3.62 MB	-rwxr-xr-x
mysql_waitpid	3.52 MB	-rwxr-xr-x
mytop	61.06 KB	-rwxr-xr-x
ncurses5-config	5.17 KB	-rwxr-xr-x
ngettext	34.55 KB	-rwxr-xr-x
onig-config	1.35 KB	-rwxr-xr-x
openssl	642.05 KB	-rwxr-xr-x
osql	8.84 KB	-rwxr-xr-x
pal2rgb	14.82 KB	-rwxr-xr-x
pcre-config	2.31 KB	-rwxr-xr-x
pcregrep	36.34 KB	-rwxr-xr-x
pcretest	66.56 KB	-rwxr-xr-x
pear	817 B	-rwxr-xr-x
peardev	838 B	-rwxr-xr-x
pearinfo	538 B	-rwxr-xr-x
pecl	751 B	-rwxr-xr-x
perl	3.3 MB	-rwxr-xr-x
perl5.34.1	3.3 MB	-rwxr-xr-x
perlbug	44.13 KB	-rwxr-xr-x
perldoc	274 B	-rwxr-xr-x
perlivp	10.58 KB	-rwxr-xr-x
perlthanks	44.13 KB	-rwxr-xr-x
perror	3.71 MB	-rwxr-xr-x
phar	14.89 KB	-rwxr-xr-x
phar.phar	14.89 KB	-rwxr-xr-x
php	18.06 MB	-rwxr-xr-x
php-8.2.12	18.06 MB	-rwxr-xr-x
php-cgi	18.06 MB	-rwxr-xr-x
php-cgi-8.2.12	18.06 MB	-rwxr-xr-x
php-config	4.39 KB	-rwxr-xr-x
php-config-8.2.12	4.39 KB	-rwxr-xr-x
phpdbg	18.06 MB	-rwxr-xr-x
phpize	4.43 KB	-rwxr-xr-x
phpize-8.2.12	4.43 KB	-rwxr-xr-x
phpunit	1.9 KB	-rwxr-xr-x
piconv	8.18 KB	-rwxr-xr-x
pkgdata	43.7 KB	-rwxr-xr-x
pl2pm	4.44 KB	-rwxr-xr-x
png2dbl	14.38 KB	-rwxr-xr-x
pngfix	46.48 KB	-rwxr-xr-x
png-fix-itxt	6.11 KB	-rwxr-xr-x
pngtogd	10.14 KB	-rwxr-xr-x
pngtogd2	10.15 KB	-rwxr-xr-x
pod2html	4.05 KB	-rwxr-xr-x
pod2man	14.69 KB	-rwxr-xr-x
pod2text	10.56 KB	-rwxr-xr-x
pod2usage	4.02 KB	-rwxr-xr-x
podchecker	3.58 KB	-rwxr-xr-x
POST	14.34 KB	-r-xr-xr-x
ppm2tiff	14.51 KB	-rwxr-xr-x
prove	13.35 KB	-rwxr-xr-x
prxs	8.96 KB	-rwxr-xr-x
ptar	3.49 KB	-rwxr-xr-x
ptardiff	2.59 KB	-rwxr-xr-x
ptargrep	4.3 KB	-rwxr-xr-x
ras2tiff	10.48 KB	-rwxr-xr-x
raw2adpcm	10.21 KB	-rwxr-xr-x
raw2tiff	18.35 KB	-rwxr-xr-x
rdjpgcom	10.18 KB	-rwxr-xr-x
recode-sr-latin	14.33 KB	-rwxr-xr-x
replace	3.5 MB	-rwxr-xr-x
reset	18.59 KB	-rwxr-xr-x
resolveip	3.52 MB	-rwxr-xr-x
resolve_stack_dump	3.53 MB	-rwxr-xr-x
rgb2ycbcr	14.46 KB	-rwxr-xr-x
rotatelogs	18.41 KB	-rwxr-xr-x
sabcmd	21.13 KB	-rwxr-xr-x
sablot-config	1.11 KB	-rwxr-xr-x
shasum	9.76 KB	-rwxr-xr-x
splain	18.97 KB	-rwxr-xr-x
sqlite	27.8 KB	-rwxr-xr-x
sqlite3	1.74 MB	-rwxr-xr-x
sst_dump	4.04 MB	-rwxr-xr-x
streamzip	5.31 KB	-r-xr-xr-x
suexec	14.36 KB	-rwsr-xr-x
swftocxx	154.57 KB	-rwxr-xr-x
swftoperl	154.57 KB	-rwxr-xr-x
swftophp	154.57 KB	-rwxr-xr-x
swftopython	154.57 KB	-rwxr-xr-x
swftotcl	154.57 KB	-rwxr-xr-x
tabs	14.31 KB	-rwxr-xr-x
tdspool	286.9 KB	-rwxr-xr-x
thumbnail	14.92 KB	-rwxr-xr-x
tic	66.7 KB	-rwxr-xr-x
tiff2bw	14.8 KB	-rwxr-xr-x
tiff2pdf	66.52 KB	-rwxr-xr-x
tiff2ps	55.95 KB	-rwxr-xr-x
tiff2rgba	14.32 KB	-rwxr-xr-x
tiffcmp	18.41 KB	-rwxr-xr-x
tiffcp	43.31 KB	-rwxr-xr-x
tiffcrop	112.88 KB	-rwxr-xr-x
tiffdither	14.48 KB	-rwxr-xr-x
tiffdump	18.52 KB	-rwxr-xr-x
tiffinfo	18.55 KB	-rwxr-xr-x
tiffmedian	22.44 KB	-rwxr-xr-x
tiffset	10.23 KB	-rwxr-xr-x
tiffsplit	14.3 KB	-rwxr-xr-x
toe	14.38 KB	-rwxr-xr-x
tput	14.41 KB	-rwxr-xr-x
tset	18.59 KB	-rwxr-xr-x
tsql	282.99 KB	-rwxr-xr-x
uconv	47.36 KB	-rwxr-xr-x
unzip-mem	14.21 KB	-rwxr-xr-x
unzzip	10.21 KB	-rwxr-xr-x
unzzipcat	10.2 KB	-rwxr-xr-x
unzzipcat-mem	10.17 KB	-rwxr-xr-x
unzzipcat-seeko	10.2 KB	-rwxr-xr-x
unzzipdir	6.16 KB	-rwxr-xr-x
unzzipdir-mem	6.13 KB	-rwxr-xr-x
use-devel-checklib	2.81 KB	-r-xr-xr-x
wcmgr	6.1 KB	-rwxr-xr-x
webalizer	157.1 KB	-rwxr-xr-x
webazolver	157.1 KB	-rwxr-xr-x
webpng	14.28 KB	-rwxr-xr-x
wrjpgcom	10.19 KB	-rwxr-xr-x
wsrep_sst_backup	2.95 KB	-rwxr-xr-x
wsrep_sst_common	54.05 KB	-rw-r--r--
wsrep_sst_mariabackup	51.01 KB	-rwxr-xr-x
wsrep_sst_mysqldump	7.7 KB	-rwxr-xr-x
wsrep_sst_rsync	32.31 KB	-rwxr-xr-x
wsrep_sst_rsync_wan	32.31 KB	-rwxr-xr-x
xgettext	330.1 KB	-rwxr-xr-x
xml2-config	1.69 KB	-rwxr-xr-x
xmlcatalog	14.35 KB	-rwxr-xr-x
xmllint	64.38 KB	-rwxr-xr-x
xmlwf	26.57 KB	-rwxr-xr-x
xslt-config	2.36 KB	-rwxr-xr-x
xsltproc	22.52 KB	-rwxr-xr-x
xsubpp	5.06 KB	-rwxr-xr-x
yacc	45 B	-rwxr-xr-x
zipcmp	19 KB	-rwxr-xr-x
zipdetails	49.95 KB	-r-xr-xr-x
zipmerge	14.88 KB	-rwxr-xr-x
ziptool	27.7 KB	-rwxr-xr-x
zzcat	6.13 KB	-rwxr-xr-x
zzdir	10.16 KB	-rwxr-xr-x
zzxorcat	10.16 KB	-rwxr-xr-x
zzxorcopy	10.17 KB	-rwxr-xr-x
zzxordir	10.19 KB	-rwxr-xr-x

Code Editor : mysql_secure_installation

#!/bin/sh

# Copyright (c) 2002, 2016, Oracle and/or its affiliates. All rights reserved.
# 
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; version 2 of the License.
# 
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
# 
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1335  USA

config=".my.cnf.$$"
command=".mysql.$$"
output=".my.output.$$"

trap "interrupt" 1 2 3 6 15

rootpass=""
echo_n=
echo_c=
basedir=
defaults_file=
defaults_extra_file=
no_defaults=

parse_arg()
{
  echo "$1" | sed -e 's/^[^=]*=//'
}

parse_arguments()
{
  # We only need to pass arguments through to the server if we don't
  # handle them here.  So, we collect unrecognized options (passed on
  # the command line) into the args variable.
  pick_args=
  if test "$1" = PICK-ARGS-FROM-ARGV
  then
    pick_args=1
    shift
  fi

for arg
  do
    case "$arg" in
      --basedir=*) basedir=`parse_arg "$arg"` ;;
      --defaults-file=*) defaults_file="$arg" ;;
      --defaults-extra-file=*) defaults_extra_file="$arg" ;;
      --no-defaults) no_defaults="$arg" ;;
      *)
        if test -n "$pick_args"
        then
          # This sed command makes sure that any special chars are quoted,
          # so the arg gets passed exactly to the server.
          # XXX: This is broken; true fix requires using eval and proper
          # quoting of every single arg ($basedir, $ldata, etc.)
          #args="$args "`echo "$arg" | sed -e 's,$[^a-zA-Z0-9_.-]$,\\\\\1,g'`
          args="$args $arg"
        fi
        ;;
    esac
  done
}

# Try to find a specific file within --basedir which can either be a binary
# release or installed source directory and return the path.
find_in_basedir()
{
  return_dir=0
  found=0
  case "$1" in
    --dir)
      return_dir=1; shift
      ;;
  esac

file=$1; shift

for dir in "$@"
  do
    if test -f "$basedir/$dir/$file"
    then
      found=1
      if test $return_dir -eq 1
      then
        echo "$basedir/$dir"
      else
        echo "$basedir/$dir/$file"
      fi
      break
    fi
  done

if test $found -eq 0
  then
      # Test if command is in PATH
      $file --no-defaults --version > /dev/null 2>&1
      status=$?
      if test $status -eq 0
      then
        echo $file
      fi
  fi
}

cannot_find_file()
{
  echo
  echo "FATAL ERROR: Could not find $1"

shift
  if test $# -ne 0
  then
    echo
    echo "The following directories were searched:"
    echo
    for dir in "$@"
    do
      echo "    $dir"
    done
  fi

echo
  echo "If you compiled from source, you need to run 'make install' to"
  echo "copy the software into the correct location ready for operation."
  echo
  echo "If you are using a binary release, you must either be at the top"
  echo "level of the extracted archive, or pass the --basedir option"
  echo "pointing to that location."
  echo
}

# Ok, let's go.  We first need to parse arguments which are required by
# my_print_defaults so that we can execute it first, then later re-parse
# the command line to add any extra bits that we need.
parse_arguments PICK-ARGS-FROM-ARGV "$@"

#
# We can now find my_print_defaults.  This script supports:
#
#   --srcdir=path pointing to compiled source tree
#   --basedir=path pointing to installed binary location
#
# or default to compiled-in locations.
#

if test -n "$basedir"
then
  print_defaults=`find_in_basedir my_print_defaults bin extra`
  echo "print: $print_defaults"
  if test -z "$print_defaults"
  then
    cannot_find_file my_print_defaults $basedir/bin $basedir/extra
    exit 1
  fi
  mysql_command=`find_in_basedir mysql bin`
  if test -z "$mysql_command"
  then
    cannot_find_file mysql $basedir/bin
    exit 1
  fi
else
  print_defaults="/opt/lampp/bin/my_print_defaults"
  mysql_command="/opt/lampp/bin/mysql"
fi

if test ! -x "$print_defaults"
then
  cannot_find_file "$print_defaults"
  exit 1
fi

if test ! -x "$mysql_command"
then
  cannot_find_file "$mysql_command"
  exit 1
fi

# Now we can get arguments from the group [client] and [client-server]
# in the my.cfg file, then re-run to merge with command line arguments.
parse_arguments `$print_defaults $defaults_file $defaults_extra_file $no_defaults client client-server client-mariadb`
parse_arguments PICK-ARGS-FROM-ARGV "$@"

set_echo_compat() {
    case `echo "testing\c"`,`echo -n testing` in
	*c*,-n*) echo_n=   echo_c=     ;;
	*c*,*)   echo_n=-n echo_c=     ;;
	*)       echo_n=   echo_c='\c' ;;
    esac
}

validate_reply () {
    ret=0
    if [ -z "$1" ]; then
	reply=y
	return $ret
    fi
    case $1 in
        y|Y|yes|Yes|YES) reply=y ;;
        n|N|no|No|NO)    reply=n ;;
        *) ret=1 ;;
    esac
    return $ret
}

prepare() {
    touch $config $command
    chmod 600 $config $command
}

do_query() {
    echo "$1" >$command
    #sed 's,^,> ,' < $command  # Debugging
    $mysql_command --defaults-file=$config $defaults_extra_file $no_defaults $args <$command >$output
    return $?
}

# Simple escape mechanism (\-escape any ' and \), suitable for two contexts:
# - single-quoted SQL strings
# - single-quoted option values on the right hand side of = in my.cnf
#
# These two contexts don't handle escapes identically.  SQL strings allow
# quoting any character (\C => C, for any C), but my.cnf parsing allows
# quoting only \, ' or ".  For example, password='a\b' quotes a 3-character
# string in my.cnf, but a 2-character string in SQL.
#
# This simple escape works correctly in both places.
basic_single_escape () {
    # The quoting on this sed command is a bit complex.  Single-quoted strings
    # don't allow *any* escape mechanism, so they cannot contain a single
    # quote.  The string sed gets (as argv[1]) is:  s/$['\]$/\\\1/g
    #
    # Inside a character class, \ and ' are not special, so the ['\] character
    # class is balanced and contains two characters.
    echo "$1" | sed 's/$['"'"'\]$/\\\1/g'
}

#
# create a simple my.cnf file to be able to pass the root password to the mysql
# client without putting it on the command line
#
make_config() {
    echo "# mysql_secure_installation config file" >$config
    echo "[mysql]" >>$config
    echo "user=root" >>$config
    esc_pass=`basic_single_escape "$rootpass"`
    echo "password='$esc_pass'" >>$config
    #sed 's,^,> ,' < $config  # Debugging

if test -n "$defaults_file"
    then
        dfile=`parse_arg "$defaults_file"`
        cat "$dfile" >>$config
    fi
}

get_root_password() {
    status=1
    while [ $status -eq 1 ]; do
	stty -echo
	echo $echo_n "Enter current password for root (enter for none): $echo_c"
	read password
	echo
	stty echo
	if [ "x$password" = "x" ]; then
	    emptypass=1
	else
	    emptypass=0
	fi
	rootpass=$password
	make_config
	do_query "show create user root@localhost"
	status=$?
    done
    if grep -q unix_socket $output; then
      emptypass=0
    fi
    echo "OK, successfully used password, moving on..."
    echo
}

set_root_password() {
    stty -echo
    echo $echo_n "New password: $echo_c"
    read password1
    echo
    echo $echo_n "Re-enter new password: $echo_c"
    read password2
    echo
    stty echo

if [ "$password1" != "$password2" ]; then
	echo "Sorry, passwords do not match."
	echo
	return 1
    fi

if [ "$password1" = "" ]; then
	echo "Sorry, you can't use an empty password here."
	echo
	return 1
    fi

esc_pass=`basic_single_escape "$password1"`
    do_query "UPDATE mysql.global_priv SET priv=json_set(priv, '$.plugin', 'mysql_native_password', '$.authentication_string', PASSWORD('$esc_pass')) WHERE User='root';"
    if [ $? -eq 0 ]; then
	echo "Password updated successfully!"
	echo "Reloading privilege tables.."
	reload_privilege_tables
	if [ $? -eq 1 ]; then
		clean_and_exit
	fi
	echo
	rootpass=$password1
	make_config
    else
	echo "Password update failed!"
	clean_and_exit
    fi

return 0
}

remove_anonymous_users() {
    do_query "DELETE FROM mysql.global_priv WHERE User='';"
    if [ $? -eq 0 ]; then
	echo " ... Success!"
    else
	echo " ... Failed!"
	clean_and_exit
    fi

return 0
}

remove_remote_root() {
    do_query "DELETE FROM mysql.global_priv WHERE User='root' AND Host NOT IN ('localhost', '127.0.0.1', '::1');"
    if [ $? -eq 0 ]; then
	echo " ... Success!"
    else
	echo " ... Failed!"
    fi
}

remove_test_database() {
    echo " - Dropping test database..."
    do_query "DROP DATABASE IF EXISTS test;"
    if [ $? -eq 0 ]; then
	echo " ... Success!"
    else
	echo " ... Failed!  Not critical, keep moving..."
    fi

echo " - Removing privileges on test database..."
    do_query "DELETE FROM mysql.db WHERE Db='test' OR Db='test\\_%'"
    if [ $? -eq 0 ]; then
	echo " ... Success!"
    else
	echo " ... Failed!  Not critical, keep moving..."
    fi

return 0
}

reload_privilege_tables() {
    do_query "FLUSH PRIVILEGES;"
    if [ $? -eq 0 ]; then
	echo " ... Success!"
	return 0
    else
	echo " ... Failed!"
	return 1
    fi
}

interrupt() {
    echo
    echo "Aborting!"
    echo
    cleanup
    stty echo
    exit 1
}

cleanup() {
    echo "Cleaning up..."
    rm -f $config $command $output
}

# Remove the files before exiting.
clean_and_exit() {
	cleanup
	exit 1
}

# The actual script starts here

prepare
set_echo_compat

echo
echo "NOTE: RUNNING ALL PARTS OF THIS SCRIPT IS RECOMMENDED FOR ALL MariaDB"
echo "      SERVERS IN PRODUCTION USE!  PLEASE READ EACH STEP CAREFULLY!"
echo
echo "In order to log into MariaDB to secure it, we'll need the current"
echo "password for the root user. If you've just installed MariaDB, and"
echo "haven't set the root password yet, you should just press enter here."
echo

get_root_password

#
# Set the root password
#

echo "Setting the root password or using the unix_socket ensures that nobody"
echo "can log into the MariaDB root user without the proper authorisation."
echo

while true ; do
    if [ $emptypass -eq 1 ]; then
	echo $echo_n "Enable unix_socket authentication? [Y/n] $echo_c"
    else
	echo "You already have your root account protected, so you can safely answer 'n'."
	echo
	echo $echo_n "Switch to unix_socket authentication [Y/n] $echo_c"
    fi
    read reply
    validate_reply $reply && break
done

if [ "$reply" = "n" ]; then
  echo " ... skipping."
else
  emptypass=0
  do_query "UPDATE mysql.global_priv SET priv=json_set(priv, '$.password_last_changed', UNIX_TIMESTAMP(), '$.plugin', 'mysql_native_password', '$.authentication_string', 'invalid', '$.auth_or', json_array(json_object(), json_object('plugin', 'unix_socket'))) WHERE User='root';"
  if [ $? -eq 0 ]; then
   echo "Enabled successfully!"
   echo "Reloading privilege tables.."
   reload_privilege_tables
   if [ $? -eq 1 ]; then
     clean_and_exit
   fi
   echo
  else
   echo "Failed!"
   clean_and_exit
  fi
fi
echo

while true ; do
    if [ $emptypass -eq 1 ]; then
	echo $echo_n "Set root password? [Y/n] $echo_c"
    else
	echo "You already have your root account protected, so you can safely answer 'n'."
	echo
	echo $echo_n "Change the root password? [Y/n] $echo_c"
    fi
    read reply
    validate_reply $reply && break
done

if [ "$reply" = "n" ]; then
    echo " ... skipping."
else
    status=1
    while [ $status -eq 1 ]; do
	set_root_password
	status=$?
    done
fi
echo

#
# Remove anonymous users
#

echo "By default, a MariaDB installation has an anonymous user, allowing anyone"
echo "to log into MariaDB without having to have a user account created for"
echo "them.  This is intended only for testing, and to make the installation"
echo "go a bit smoother.  You should remove them before moving into a"
echo "production environment."
echo

while true ; do
    echo $echo_n "Remove anonymous users? [Y/n] $echo_c"
    read reply
    validate_reply $reply && break
done
if [ "$reply" = "n" ]; then
    echo " ... skipping."
else
    remove_anonymous_users
fi
echo

#
# Disallow remote root login
#

echo "Normally, root should only be allowed to connect from 'localhost'.  This"
echo "ensures that someone cannot guess at the root password from the network."
echo
while true ; do
    echo $echo_n "Disallow root login remotely? [Y/n] $echo_c"
    read reply
    validate_reply $reply && break
done
if [ "$reply" = "n" ]; then
    echo " ... skipping."
else
    remove_remote_root
fi
echo

#
# Remove test database
#

echo "By default, MariaDB comes with a database named 'test' that anyone can"
echo "access.  This is also intended only for testing, and should be removed"
echo "before moving into a production environment."
echo

while true ; do
    echo $echo_n "Remove test database and access to it? [Y/n] $echo_c"
    read reply
    validate_reply $reply && break
done

if [ "$reply" = "n" ]; then
    echo " ... skipping."
else
    remove_test_database
fi
echo

#
# Reload privilege tables
#

echo "Reloading the privilege tables will ensure that all changes made so far"
echo "will take effect immediately."
echo

while true ; do
    echo $echo_n "Reload privilege tables now? [Y/n] $echo_c"
    read reply
    validate_reply $reply && break
done

if [ "$reply" = "n" ]; then
    echo " ... skipping."
else
    reload_privilege_tables
fi
echo

cleanup

echo
echo "All done!  If you've completed all of the above steps, your MariaDB"
echo "installation should now be secure."
echo
echo "Thanks for using MariaDB!"

${this.title}

Code Editor : mysql_secure_installation