Gecko [ www.utparral.edu.mx ]

Name	Size	Permission
dll.d	[ DIR ]	drwxr-xr-x
abaton.conf	25 B	-rw-r--r--
agfafocus.conf	13 B	-rw-r--r--
airscan.conf	3.21 KB	-rw-r--r--
apple.conf	24 B	-rw-r--r--
artec.conf	25 B	-rw-r--r--
artec_eplus48u.conf	4.06 KB	-rw-r--r--
avision.conf	547 B	-rw-r--r--
bh.conf	29 B	-rw-r--r--
canon630u.conf	193 B	-rw-r--r--
canon.conf	26 B	-rw-r--r--
canon_dr.conf	3.96 KB	-rw-r--r--
canon_lide70.conf	258 B	-rw-r--r--
canon_pp.conf	1.13 KB	-rw-r--r--
cardscan.conf	552 B	-rw-r--r--
coolscan2.conf	753 B	-rw-r--r--
coolscan3.conf	753 B	-rw-r--r--
coolscan.conf	34 B	-rw-r--r--
dc210.conf	983 B	-rw-r--r--
dc240.conf	983 B	-rw-r--r--
dc25.conf	703 B	-rw-r--r--
dell1600n_net.conf	490 B	-rw-r--r--
dll.conf	1.1 KB	-rw-r--r--
dmc.conf	12 B	-rw-r--r--
epjitsu.conf	2.67 KB	-rw-r--r--
epson2.conf	374 B	-rw-r--r--
epson.conf	792 B	-rw-r--r--
epsonds.conf	273 B	-rw-r--r--
escl.conf	1.41 KB	-rw-r--r--
fujitsu.conf	3.31 KB	-rw-r--r--
genesys.conf	2.41 KB	-rw-r--r--
gphoto2.conf	1.11 KB	-rw-r--r--
gt68xx.conf	7.76 KB	-rw-r--r--
hp3900.conf	395 B	-rw-r--r--
hp4200.conf	76 B	-rw-r--r--
hp5400.conf	238 B	-rw-r--r--
hp.conf	497 B	-rw-r--r--
hpsj5s.conf	23 B	-rw-r--r--
hs2p.conf	24 B	-rw-r--r--
ibm.conf	38 B	-rw-r--r--
kodakaio.conf	2.54 KB	-rw-r--r--
kodak.conf	367 B	-rw-r--r--
kvs1025.conf	39 B	-rw-r--r--
leo.conf	112 B	-rw-r--r--
lexmark.conf	119 B	-rw-r--r--
ma1509.conf	187 B	-rw-r--r--
magicolor.conf	1.22 KB	-rw-r--r--
matsushita.conf	665 B	-rw-r--r--
microtek2.conf	279 B	-rw-r--r--
microtek.conf	268 B	-rw-r--r--
mustek.conf	2.07 KB	-rw-r--r--
mustek_pp.conf	3.71 KB	-rw-r--r--
mustek_usb.conf	808 B	-rw-r--r--
nec.conf	13 B	-rw-r--r--
net.conf	573 B	-rw-r--r--
p5.conf	365 B	-rw-r--r--
pie.conf	75 B	-rw-r--r--
pieusb.conf	669 B	-rw-r--r--
pixma.conf	1.22 KB	-rw-r--r--
plustek.conf	4.04 KB	-rw-r--r--
plustek_pp.conf	942 B	-rw-r--r--
qcam.conf	391 B	-rw-r--r--
ricoh.conf	29 B	-rw-r--r--
rts8891.conf	183 B	-rw-r--r--
s9036.conf	13 B	-rw-r--r--
saned.conf	1.03 KB	-rw-r--r--
sceptre.conf	48 B	-rw-r--r--
sharp.conf	1.42 KB	-rw-r--r--
sm3840.conf	115 B	-rw-r--r--
snapscan.conf	2.19 KB	-rw-r--r--
sp15c.conf	10 B	-rw-r--r--
st400.conf	2.17 KB	-rw-r--r--
stv680.conf	178 B	-rw-r--r--
tamarack.conf	27 B	-rw-r--r--
teco1.conf	355 B	-rw-r--r--
teco2.conf	634 B	-rw-r--r--
teco3.conf	217 B	-rw-r--r--
test.conf	1.76 KB	-rw-r--r--
u12.conf	1.46 KB	-rw-r--r--
umax1220u.conf	386 B	-rw-r--r--
umax.conf	3.01 KB	-rw-r--r--
umax_pp.conf	1.64 KB	-rw-r--r--
xerox_mfp.conf	3.97 KB	-rw-r--r--

Code Editor : artec_eplus48u.conf

# artec_eplus48u - SANE Backend configuration file

# This section is for use with the Artec E+ 48U scanner
# This scanner is also sold as
# Tevion MD 9693, Medion MD 9705, Medion MD 9693, Medion MD4394
# This sections contains verbose description of each option.
# For other scanners, see below.
#
# The USB section:
# each device needs at least the following line:
# usb vendor-ID and product-ID
# Every device configuration in this file must begin with an usb entry.
usb 0x05d8 0x4003

# Path to the firmware file
# This file comes with the Windows driver
# The scanner won't work without it
option artecFirmwareFile /usr/share/sane/artec_eplus48u/Artec48.usb

# Is the scanner an Artec E Plus Pro (or compatible)? 0 = no, 1 = yes
option ePlusPro   0

# for adjusting the default gamma values
option redGamma         1.0
option greenGamma       1.0
option blueGamma        1.0
option masterGamma      1.9

#Use this options to set the default offset and exposure time values.
option redOffset        0x28
option greenOffset      0x2f
option blueOffset       0x2f
option redExposure      0xa7
option greenExposure    0x116
option blueExposure     0xdc

# The vendor and model string
# This string is displayed by the frontends. If you do not want to get your
# scanner reported as "Artec E+ 48U", then change the option accordingly.
option vendorString "Artec"
option modelString "E+ 48U"

# device-name
#
# If autodetection does not work, then you can specify the device here
# The device entry must be the last one in this config file (or the last one before a
# new usb entry).
#If you are using libusb, a device looks like this:
#device libusb:001:002
#If you are using the scanner module (kernel driver), a device looks like this:
#device /dev/usbscanner

# ----------------------------------------------------------------------------

# Since the Trust Easy Webscan 19200 uses a different product id, we add
# another usb section here.
usb 0x05d8 0x4006
option artecFirmwareFile /usr/share/sane/artec_eplus48u/Artec48.usb
option vendorString "Trust"
option modelString "Easy Webscan 19200"

# ----------------------------------------------------------------------------

# Since the Memorex Mem48U uses a different product id, we add
# another usb section here.
usb 0x05d8 0x4005
option artecFirmwareFile /usr/share/sane/artec_eplus48u/Artec48.usb
option vendorString "Memorex"
option modelString "MEM 48U"

# ----------------------------------------------------------------------------

# Since the Trust 240H Easy Webscan Gold uses a different product id, we add
# another usb section here.
usb 0x05d8 0x4007
option artecFirmwareFile /usr/share/sane/artec_eplus48u/Artec48.usb
option ePlusPro         1
option vendorString "Trust"
option modelString "240H Easy Webscan Gold"

# ----------------------------------------------------------------------------

# Since the UMAX AstraSlim SE uses a different product id, we add
# another usb section here.
usb 0x05d8 0x4009
option artecFirmwareFile /usr/share/sane/artec_eplus48u/Artec48.usb
option vendorString "UMAX"
option modelString "AstraSlim SE"
option ePlusPro 0

# ----------------------------------------------------------------------------

# This section is for the Artec E+ Pro
# Note, that the name of the firmware file is called 1200.usb for
# this device
usb 0x05d8 0x4004
option artecFirmwareFile /usr/share/sane/artec_eplus48u/1200.usb
option ePlusPro   1
option vendorString "Artec"
option modelString "E+ Pro"

# ----------------------------------------------------------------------------

# This section is for the UMAX AstraSlim 1200 SE
# Note, that the name of the firmware file is called 1200.usb for
# this device
usb 0x05d8 0x4010
option artecFirmwareFile /usr/share/sane/artec_eplus48u/1200.usb
option vendorString "UMAX"
option modelString "AstraSlim 1200 SE"

# ----------------------------------------------------------------------------

# Since the Yakumo Scan50 uses a different product id, we add
# another usb section here.
usb 0x05d8 0x4011
option artecFirmwareFile /usr/share/sane/artec_eplus48u/Artec48.usb
option vendorString "Yakumo"
option modelString "Scan50"

${this.title}

Code Editor : artec_eplus48u.conf